Articulated Concrete Block Stability Assessment for Embankment-Overtopping Conditions
Publication: Journal of Hydraulic Engineering
Volume 140, Issue 5
Abstract
Articulated concrete block (ACB) revetment systems are widely used for channel lining and embankment protection. Current approaches for prediction of ACB system stability use a moment stability analysis with a ratio of the boundary shear stress to critical shear stress to account for all hydrodynamic forces, which results in the exclusion of the flow velocity. Two embankment-overtopping laboratory data sets for a given ACB system were initially evaluated using the current industry-accepted design method. A new stability analysis method, termed the shear and velocity stability assessment method, was developed for ACB systems with embankment-overtopping flow, which uses a moment stability analysis in which hydrodynamic forces are computed using both boundary shear stress and flow velocity. A database was developed that included overtopping tests for three ACB systems with varying embankment slopes and lengths. The current design methodology accurately predicted stability for 67% of the tests and the instability for 40% of the installations. The shear and velocity assessment method accurately predicted stability for 91% of the tests and instability for 80% of the installations.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abt, S. R., Leech, J. R., Thornton, C. I., and Lipscomb, C. M. (2001). “Articulated concrete block stability testing.” J. Am. Water Resour. Assoc., 37(1), 27–34.
ASTM. (2008a). “Test method for performance testing of articulating concrete block (ACB) revetment systems for hydraulics stability in open channel flow.”, West Conshohocken, PA.
ASTM. (2008b). “Guide for analysis and interpretation of test data for articulating concrete block (ACB) revetment systems in open channel flow.”, West Conshohocken, PA.
Clopper, P. E. (1989). “Hydraulic stability of articulated concrete block revetment systems during overtopping flow.”, Federal Highway Administration, McLean, VA.
Clopper, P. E. (1991). “Protecting embankment dams with concrete block systems.” Hydro Review, 10(2), 54–67.
Clopper, P. E., and Chen, Y. H. (1988). “Minimizing embankment damage during overtopping flow.”, Federal Highway Administration, McLean, VA.
Cox, A. L. (2010). “Moment stability analysis method for determining safety factors for articulated concrete blocks.” Ph.D. dissertation, Colorado State Univ., Fort Collins, CO.
Harris County Flood Control District (HCFCD). (2001). “Design manual for articulating concrete block systems.” Ayres Associates, Houston, TX.
Hewlett, H. W. M., Borman, L. A., and Bramley, M. E. (1987). “Design of reinforced grass waterways.”, Construction Industry Research and Information Association, London.
Lagasse, P. F., et al. (2009). “Bridge scour and stream instability countermeasures: Experience, selection, and design guidance.” Hydraulic Engineering Circular No. 23, 3rd Ed., Federal Highway Administration, Washington, DC.
Lagasse, P. F., Zevenbergen, L. W., Schall, J. D., and Clopper, P. E. (2001). “Bridge scour and stream instability countermeasures: Experience, selection, and design guidance.” Hydraulic Engineering Circular No. 23, Federal Highway Administration, Washington, DC.
National Concrete Masonry Association (NCMA). (2010). “Design manual for articulating concrete block (ACB) revetment systems.” Publication No. TR220A, Herndon, VA, 91.
Robeson, M. D., Thornton, C. I., and Lipscomb, C. M. (2002). “Articulated concrete block data report.”, Prepared for Armortec Erosion Control Solutions, Fort Collins, CO.
Simons, D. B., and Sentürk, F. (1976). Sediment transport technology, Water Resources Publications, Littleton, CO.
Stevens, M. A., and Simons, D. B. (1971). “Stability analyses for coarse granular material on slopes.” River Mechanics, H. W. Shen, ed., Vol. 1, Colorado State Univ., Fort Collins, CO, 17-1–17-27.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Sep 20, 2012
Accepted: Nov 12, 2013
Published online: Nov 14, 2013
Published in print: May 1, 2014
Discussion open until: Jul 4, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.