New Near-Wall Treatment for Suspended Sediment Transport Simulations with High Reynolds Number Turbulence Models
Publication: Journal of Hydraulic Engineering
Volume 140, Issue 3
Abstract
A new approach is proposed to treat the bottom boundary conditions for suspended sediment transport modeling, which works with turbulence models using wall functions. New boundary conditions for suspended sediment are specified directly at the sediment bed, not at some reference height. It is numerically equivalent to the traditional approach of specifying boundary condition at a reference height. The new approach eliminates the need of any special treatment for the gap between the bed and the reference height. It also reduces the loss of accuracy due to the interpolation of solution variables between the meshes for fluid and suspended sediment. The associated near-bottom grid resolution requirement is discussed and a general guideline is proposed. The application of the new near-wall treatment is demonstrated.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was partially supported by a grant from the National Science Foundation (CNIC-1157478). The author acknowledges the TRAC program support from the University of Texas at San Antonio. The author also thanks the reviewers for their comments and suggestions.
References
Coleman, N. L. (1970). “Flume studies of the sediment transfer coefficient.” Water Resour. Res., 6(3), 801–809.
Fredsøe, J., Andersen, K. H., and Sumer, B. M. (1999). “Wave plus current over ripple-covered bed.” Coastal Eng., 38(4), 117–221.
Fuhrman, D. R., Dixen, M., and Jacobsen, N. G. (2010). “Physically-consistent wall boundary conditions for the turbulence model.” J. Hydraul. Res., 48(6), 793–800.
García, M. H., ed. (2008). Sedimentation engineering: Processes, measurements, modeling, and practice, ASCE manuals and reports on engineering practice, No. 110, ASCE, Reston, VA.
García, M. H., and Parker, G. (1991). “Entrainment of bed sediment into suspension.” J. Hydraul. Eng., 414–435.
Grass, A. J. (1971). “Structural features of turbulent flow over smooth and rough boundaries.” J. Fluid Mech., 50(2), 233–255.
Jacobsen, N. G. (2011). “A full hydro- and morphodynamic description of breaker bar development.” Ph.D. thesis, Technical Univ. of Denmark, Dept. of Mechanical Engineering, Lyngby, Denmark.
Liu, X., and García, M. H. (2008). “A 3D numerical model with free water surface and mesh deformation for local sediment scour.” J. Waterway, Port, Coastal, Ocean Eng., 203–217.
Nezu, I., and Rodi, W. (1986). “Open-channel flow measurements with a laser doppler anemometer.” J. Hydraul. Eng., 335–355.
OpenFOAM Foundation. (2012). OpenFOAM: The open source CFD toolbox user guide, version 2.1.1, 〈http://www.openfoam.org〉 (May. 01, 2012).
Sumer, B. M. (2007). “Lecture notes on turbulence.” Technical Univ. of Denmark, Lyngby, Denmark.
Ueda, H., Moller, R., Komori, S., and Mizushina, T. (1977). “Eddy diffusivity near the free surface of open channel flow.” Int. J. Heat Mass Transfer, 20(11), 1127–1136.
van Rijn, L. C. (1987). “Mathematical modelling of morphological processes in the case of suspended sediment transport.” Ph.D. thesis, Delft Univ. of Technology, Delft, The Netherlands.
Wu, W. (2007). Computational river dynamics, Taylor & Francis, London.
Wu, W., Rodi, W., and Wenka, T. (2000). “3D numerical modeling of flow and sediment transport in open channels.” J. Hydraul. Eng., 4–12.
Zyserman, J., and Fredsøe, J. (1994). “Data analysis of bed concentration of suspended sediment.” J. Hydraul. Eng., 1021–1042.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Nov 8, 2012
Accepted: Sep 11, 2013
Published online: Sep 13, 2013
Discussion open until: Feb 13, 2014
Published in print: Mar 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.