Finite-Volume and Shock-Capturing Shallow Water Equation Model to Simulate Boussinesq-Type Lock-Exchange Flows
Publication: Journal of Hydraulic Engineering
Volume 139, Issue 12
Abstract
Among the various applications of the shallow water equations (SWEs) is the simulation of gravity currents (GCs). The SWEs are used as an alternative to track GC motion without explicitly dealing with turbulent processes, and constitute an intermediate solution between simpler integral models and more comprehensive models based on the Navier-Stokes equations. While the SWE equations have been successfully applied to a number of problems involving the release of dense fluids into deep ambient conditions, a more complex application is the simulation of the lock-exchange problem. In this particular problem, the ambient velocity influences the velocity as well as the shape of the GC, especially in the initial slumping stage. Features resembling discontinuities between the two layers are generated, and one numerical solution strategy has been to explicitly track such discontinuities. This work presents a shock-capturing, two-layer SWE model to simulate lock-exchange flows and its discontinuities. The main contributions are a reformulated mathematical model that incorporates the upper layer effects to the GC flow as well as a more efficient numerical solution for the flow at the GC front. The resulting numerical model was implemented using the finite-volume method (FVM) with an approximate Riemann solver, and the results compare well to existing numerical models as well as experimental data collected during this investigation.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are grateful for the financial support to conduct this investigation provided by the Marine Environmental Sciences Consortium (MESC-TASK ORDER T2-006-AU).
References
Adduce, C., Sciortino, G., and Proietti, S. (2012). “Gravity currents produced by lock-exchanges: Experiments and simulations with a two layer shallow-water model with entrainment.” J. Hydraul. Eng., 111–121.
Benjamin, T. B. (1968). “Gravity currents and related phenomena.” J. Fluid Mech., 31, 209–248.
Cenedese, C., and Adduce, C. (2008). “Mixing in a density-driven current flowing down a slope in a rotating fluid.” J. Fluid Mech., 604, 369–388.
Cenedese, C., and Adduce, C. (2010). “A new entrainment parameterization for mixing in overflows.” J. Phys. Oceanogr., 40(8), 1835–1850.
Chaudhry, M. H. (2008). Open-channel flow, 2nd Ed., Springer, New York.
Cunge, J. A., Holly, F. M., Jr., and Verwey, A. (1980). Practical aspects of computational river hydraulics, Pitman Ltd., London, U.K.
Glaister, P. (1988). “Approximate Riemann solutions of the shallow water equations.” J. Hydraul. Res., 26(3), 293–306.
Hacker, P., Linden, P. F., and Dalziel, S. B. (1996). “Mixing in lock-release gravity currents.” Dyn. Atmos. Oceans, 24(1–4), 183–195.
Hartel, C., Meiburg, E., and Necker, F. (2000). “Analysis and direct numerical simulation of the flow at a gravity-current head, part 1, Flow topology and front speed for slip and no-slip boundaries.” J. Fluid Mech., 418, 189–212.
Hatcher, T. M. (2012). “A finite volume implementation of the shallow water equations for Boussinesq gravity currents.” M.S. thesis, Auburn Univ., Auburn, AL.
Huppert, H. E., and Simpson, J. E. (1980). “The slumping of gravity currents.” J. Fluid Mech., 99(4), 785–799.
Klemp, J. B., Rotunno, R., and Skamarock, W. C. (1994). “On the dynamics of gravity currents in a channel.” J. Fluid Mech., 269, 169–198.
La Rocca, M., Adduce, C., Lombardi, V., Sciortino, G., and Hinkermann, R. (2012a). “Development of the Lattice Boltzmann method for two-layered shallow-water flow.” Int. J. Numer. Methods Fluids, 70(8), 1048–1072.
La Rocca, M., Adduce, C., Sciortino, G., and Bateman, P. A. (2008). “Experimental and numerical simulation of three-dimensional gravity currents on smooth and rough bottoms.” Phys. Fluids, 20(10), 106603.
La Rocca, M., Adduce, C., Sciortino, G., Bateman, P. A., and Boniforti, M. A. (2012b). “A two-layer shallow water model for 3D gravity currents.” J. Hydraul. Res., 50(2), 208–217.
Macchione, F., and Morelli, M. A. (2003). “Practical aspects in comparing the shock-capturing schemes for dam break problems.” J. Hydraul. Eng., 187–195.
Marino, B. M., Thomas, L. P., and Linden, P. F. (2005). “The front condition of gravity currents.” J. Fluid Mech., 536, 49–78.
Ozgokmen, T. M., Lliescu, T., and Fischer, P. F. (2009). “Large eddy simulation of stratified mixing in a three-dimensional lock-exchange system.” Ocean Modelling, 26(3–4), 134–155.
Rottman, J. W., and Simpson, J. E. (1983). “Gravity currents produced by instantaneous releases of a heavy fluid in a rectangular channel.” J. Fluid Mech., 135, 95–110.
Shin, J. O., Dalziel, S. B., and Linden, P. F. (2004). “Gravity currents produced by lock exchange.” J. Fluid Mech., 521, 1–34.
Simpson, J. E. (1997). Gravity currents in the environment and the laboratory, Cambridge University, U.K.
Sturm, T. W. (2010). Open channel hydraulics, 2nd Ed., McGraw-Hill, New York.
Toro, E. F. (2001). Shock-capturing methods for free-surface shallow flows, Wiley, New York.
Turner, J. S. (1986). “Turbulent entrainment: The development of the entrainment assumption and its application to geophysical flows.” J. Fluid Mech., 173, 431–471.
Ungarish, M. (2009). An introduction to gravity currents and intrusions, Chapman and Hall/CRC, Boca Raton, FL.
Ungarish, M., and Zemach, T. (2005). “On the slumping of high Reynolds number gravity currents in two-dimensional and axisymmetric configurations.” Eur. J. Mech. B/Fluids, 24(2), 71–90.
von Karman, T. (1940). “The engineer grapples with nonlinear problems.” Bull. Amer. Math. Soc., 46, 615–683.
Wright, S. J., and Paez-Rivadeneira, D. (1996). “Density intrusions with large relative thickness.” Dyn. Atmos. Oceans, 24(1–4), 129–137.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jul 20, 2012
Accepted: May 8, 2013
Published online: May 11, 2013
Discussion open until: Oct 11, 2013
Published in print: Dec 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.