Baffle-Drop Structure Design Relationships
Publication: Journal of Hydraulic Engineering
Volume 139, Issue 9
Abstract
A baffle-drop structure is a flow conveyance structure that can be used for transport of urban storm water down to underground storage tunnels. The water cascades down the structure from baffle to baffle and plunges into a pool at the bottom from where it is conveyed to the tunnel through an adit. The structure has been used successfully in a limited number of urban drainage schemes. However, its hydraulics and air entrainment characteristics are not fully understood. Using a series of laboratory experiments, an analysis has been tested and validated that may be used for design. The analysis provides a dimensionless relationship between key variables, including design discharge, shaft diameter, baffle spacing, and position of a vertical wall dividing the shaft in a dry and a wet portion. Using this relationship the shaft can be designed to maintain atmospheric pressure throughout its height with little or no air being entrained into the tunnel.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This paper is based in part on results of laboratory tests conducted at IIHR-Hydroscience and Engineering for the Regional Municipality of York, the Northeast Ohio Regional Sewer District, and the City of Indianapolis.
References
Ervine, D. A., and Kolkman, P. A. (1980). “Air entrainment and transport in closed conduit hydraulic structures.” Delft Hydraulics Laboratory, Delft, Netherlands.
Falvey, H. T. (1980). “Air-water flow in hydraulic structures.” Engineering Monograph No. 41, U.S. Dept. of the Interior, Water and Power Resources Services, Denver.
Jain, S. C. (1988). “Air transport in vortex-flow drop shafts.” J. Hydraul. Eng., 114(12), 1485–1497.
Jain, S. C., and Kennedy, J. F. (1983). “Vortex-flow drop structures for the Milwaukee Metropolitan Sewerage District inline storage system,”, Univ. of Iowa, Iowa City, IA.
Lyons, T. C., and Odgaard, A. J. (2010). “Hydraulic model studies for the Regional Municipality of York Southeast collector drop structures.”, Univ. of Iowa, Iowa City, IA.
Lyons, T. C., Odgaard, A. J., and Craig, A. (2011). “Baffle drop structure design and hydraulic model studies for the City of Indianapolis Fall Creek/White River tunnel system.”, Univ. of Iowa, Iowa City, IA.
Lyons, T. C., Odgaard, A. J., and Jain, S. C. (2007). “Hydraulic model study for the Northeast Ohio Regional Sewer District Euclid Creek tunnel/baffle drop structure.”, Univ. of Iowa, Iowa City, IA.
Margevicius, A., Lyons, T., Schreiber, A., Switalski, R., Benton, S., and Glovick, S. (2009). “A baffling solution to a complex problem involving sewage drop structures.” Proc., 33rd IAHR Congress: Water Engineering for a Sustainable Environment, IAHR, Madrid, Spain.
McKeogh, E. J., and Ervine, D. A. (1981). “Air entrainment rate and diffusion pattern of plunging liquid jets.” Chem. Eng. Sci., 36(7), 1161–1172.
U.S. Army Corps of Engineers. (1997). “Tunnels and shafts in rock.” Chapter 6, Engineer Manual EM 1110-2-2901, Washington, DC.
Yu, D., and Lee, J. H. W. (2009). “Hydraulics of tangential vortex intake for urban drainage.” J. Hydraul. Eng., 135(3), 164–174.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: May 10, 2012
Accepted: Mar 20, 2013
Published online: Mar 22, 2013
Discussion open until: Aug 22, 2013
Published in print: Sep 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.