Performance of a Geobag Revetment. II: Numerical Modeling
Publication: Journal of Hydraulic Engineering
Volume 139, Issue 8
Abstract
An intensive study including laboratory experiments and use of a computer software on geobag revetment performance was reported in the companion paper. To represent the failure initiation, a set of quasi-physical model runs was carried out and the conveyance estimation system (CES) computer software was employed to predict active shear stress on geobags and mobile sand bed formation. The CES could predict the depth-averaged velocities in the laboratory measurements with reasonable accuracy. This paper reports the second part of the study, dealing with the discrete element modeling (DEM) simulation. The CES results were used for preparing a mapped velocity field for a coupled DEM simulation of geobag revetment failure. The validated DEM model could identify well the critical bag location in varying water depths and with varying bed formations. Toe scour, one of the major instability factors in revetments, and its influence on bottommost layer of the bags were also reasonably represented in this DEM model. It is envisaged that the use of a DEM model will provide more details on geobag revetment performance in riverbanks.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study has been carried out under the Joint Research Institute (JRI) Collaboration in Civil and Environmental Engineering. Funding for this work was provided by Heriot-Watt University through a James Watt Scholarship, and additional support from DEM Solutions Limited and NAUE Gmbh & Co., are gratefully acknowledged.
References
Achenbach, E. (1972). “Experiments on the flow past spheres at very high Reynolds numbers.” J. Fluid Mech., 54(03), 565–575.
Akter, A., Pender, G., Wright, G., and Crapper, M. (2013). “Performance of a geobag revetment. I: Quasi-physical modeling.” J. Hydraul. Eng., 139(8), 865–876.
Akter, A., Wright, G., Crapper, M., and Pender, G. (2009). “Failure mechanisms in geobag structures.”Proc., 4th IASME/WSEAS Int. Conf. on Water Resources, Hydraulics and Hydrology (WHH’09), WSEAS, Cambridge, UK, 25–30.
Bertrand, F., Leclaire, L. A., and Levecque, G. (2005). “DEM-based models for the mixing of granular materials.” Chem. Eng. Sci., 60(8–9), 2517–2531.
British Standards Institution (BSI). (1991). “Methods of test for geotextiles. Determination of sand-geotextile frictional behaviour by direct shear.” London.
British Standards Institution (BSI). (1992). “Methods of tests for Nonwovens—Part 3: Determination of tensile strength and elongation.” London.
British Standards Institution (BSI). (1995). “Testing aggregates. Methods for determination of density.” London.
Chow, V. T. (1959). Open-channel hydraulics, McGraw-Hill, New York, 168–170.
Crapper, M., Ooi, J., Favier, J., and Golz, P. (2005). “Coupled continuum-discrete modeling of solid-fluid phase flow.” Proc., 7th World Congress of Chemical Engineering, Institution of Chemical Engineers, Glasgow.
DEMSolutions. (2010). “EDEM 2.3 user guide.” 〈http://www.dem-solutions.com/〉 (Apr. 22, 2011).
Garcin, P., Faure, Y. H., Gourc, J. P., and Purwanto, E. (1995). “Behaviour of geosynthetic clay liner (GCL): Laboratory tests.” Proc., 5th Int. Symp. on Landfill, Calgary, Canada, 1, 347–358.
Hölzer, A., and Sommerfeld, M. (2008). “New simple correlation formula for the drag coefficient of non-spherical particles.” Powder Technol., 184(3), 361–365.
Korkut, R., Martinez, E. J., Morales, R., Ettema, R., and Barkdoll, B. (2007). “Geobag performance as scour countermeasure for bridge abutments.” J. Hydraul. Eng., 133(4), 431–439.
Mindlin, R. D. (1949). “Compliance of elastic bodies in contact.” J. Appl. Mech., 16, 259–268.
Mustoe, G. G. W., and Miyata, M. (2001). “Material flow analyses of non-circular shaped granular media using discrete element methods.” J. Eng. Mech., 127(10), 1017–1026.
NAUE. (2006). Advantages of needle-punched Secutex and Terrafix nonwoven geotextiles, NAUE GmbH & Co. KG, Germany.
Northwest Hydraulics Consultants (NHC). (2006). “Jamuna-Meghna River Erosion Mitigation Project Part B.”, Government of the People’s Republic of Bangladesh, Asian Development Bank and Bangladesh Water Development Board, Dhaka, Bangladesh.
Recio, J., and Oumeraci, H. (2009). “Processes affecting the hydraulic stability of coastal revetments made of geotextile sand containers.” Coastal Eng., 56(3), 260–284.
Tilley, R. J. D. (2004). Understanding solids: the science of materials, Wiley, Chichester, UK.
Tomlinson, M. J., and Woodward, J. (2008). Pile design and construction practice, Routledge, Abingdon, UK.
Yang, R. Y., Jayasundara, C. T., Yu, A. B., and Curry, D. (2006). “DEM simulation of the flow of grinding media in IsaMill.” Minerals Eng., 19(10), 984–994.
Yin, C., Rosendahl, L., Knudsen Kær, S., and Sørensen, H. (2003). “Modeling the motion of cylindrical particles in a nonuniform flow.” Chem. Eng. Sci., 58(15), 3489–3498.
Zhu, L., Wang, J., Cheng, N.-S., Ying, Q., and Zhang, D. (2004). “Settling distance and incipient motion of sandbags in open channel flows.” J. Waterway, Port, Coastal, Ocean Eng., 130(2), 98–103.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Apr 24, 2012
Accepted: Dec 18, 2012
Published online: Jul 15, 2013
Published in print: Aug 1, 2013
Discussion open until: Dec 15, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.