Comparison of Turbulent Flows over Clusters of Varying Density
Publication: Journal of Hydraulic Engineering
Volume 138, Issue 12
Abstract
Gravel bed rivers commonly form an armored surface layer within which cluster bedforms develop. Clusters can form in isolation or develop cluster groups of increasing density. Flume experiments are presented in which a clustered, armored surface was formed on a gravel bed. Flows were measured over an area without a cluster and areas with an isolated cluster, a coupling of two clusters, and a group of three clusters. Turbulent flow parameters, Reynolds stresses, and turbulent kinetic energy were calculated from acoustic Doppler velocimeter measured flows and visualizations of the flow patterns around clusters. Flow separated over the cluster crest, creating an increase in the turbulent flow properties and a high-turbulence intensity region when flow reattached downstream. Turbulent kinetic energy increased around the coupled clusters, but around the grouped clusters, the flow field was distinguished by a high degree of uniformity. The net effect of increasing density of cluster grouping was an increase in the magnitude and variability of the turbulent flow field around coupled clusters, followed by an overall dampening of turbulent flows around grouped clusters in which the flow patterns generated interfered with one another, and the cluster forms sheltered the bed surface.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was supported by the National Science Foundation through EAR0943646. The writers are grateful to four anonymous reviewers and the associate editor for their comments that have helped to improve the manuscript.
References
Agelinchaab, M., Paul, S. S., and Tachie, M. F. (2009). “Velocity characteristics of flow and finite square and circular cylinders.” Proc., 33rd IAHR Congress: Water Engineering for a Sustainable Environment, Int. Association of Hydraulic Engineering and Research (IAHR), Vancouver, Canada, 480–487.
Baik, J.-J., and Kim, J.-J. (1999). “A numerical study of flow and pollutant dispersion characteristics in urban street canyons.” J. Appl. Meteorol., 38, 1576–1589.
Brandt, S. A. (2000). “Classification of geomorphological effects downstream of dams.” Catena, 40, 375–401.
Brayshaw, A. C. (1984). “The characteristics and origin of cluster bedforms in coarse-grained alluvial channels.” Sedimentology Gravels Conglomerates, Canadian Society of Petroleum, 77–85.
Brayshaw, A. C., Frostick, L. E., and Reid, I. (1983). “The hydrodynamics of particle clusters and sediment entrainment in coarse alluvial channels.” Sedimentology, 30, 137–143.
Brown, S., Nickling, W. G., and Gillies, J. A. (2008). “A wind tunnel examination of shear stress partitioning for an assortment of surface roughness distributions.” J. Geophys. Res., 113(F02S06), 1–13.
Buffin-Bélanger, T., and Roy, A. G. (1998). “Effects of a pebble cluster on the turbulent structure of a depth-limited flow in a gravel-bed river.” Geomorphology, 25, 254–267.
Buffin-Bélanger, T., and Roy, A. G. (2005). “1 min in the life of a river: Selecting the optimal record length for the measurement of turbulence in fluvial boundary layers.” Geomorphology, 68(1–2), 77–94.
Buffin-Bélanger, T., Roy, A. G., and Kirkbride, A. D. (2000). “On large-scale flow structures in a gravel-bed river.” Geomorphology, 32(3–4), 417–435.
Buffington, J. M., and Montgomery, D. R. (1999). “Effects of hydraulic roughness on surface textures of gravel-bed rivers.” Water Resour. Res., 35(11), 3507–3521.
Canovaro, F., Paris, E., and Solari, L. (2007). “Effects of macro-scale bed roughness geometry on flow resistance.” Water Resour. Res., 43(W10414), 1–17.
Canovaro, F., and Solari, L. (2007). “Dissipative analogies between a schematic macro-roughness arrangement and step-pool morphology.” Earth Surf. Process. Landforms, 32(11), 1628–1640.
Curran, J. C., and Tan, L. (2010). “An investigation of bed armoring process and the formation of microclusters.” Proc., Joint Federal Interagency Conf. 2010: Hydrology and Sedimentation for a Changing Future: Existing and Emerging Issues, JFIC, Las Vegas, 1–12.
Curran, J. C., and Wilcock, P. R. (2005). “Characteristic dimensions of the step-pool bed configuration: An experimental study.” Water Resour. Res., 41(2), W02030.
Davies, T. R. H. (1980). “Bedform spacing and flow resistance.” J. Hydraul. Div., 106(3), 423–433.
De Jong, C. (1991). “A reappraisal of the significance of obstacle clasts in cluster bedform dispersal.” Earth Surf. Process. Landforms, 16(8), 737–744.
Frey, P., and Church, M. (2011). “Bedload: A granular phenomenon.” Earth Surf. Process. Landforms, 36(1), 58–69.
Grant, G. E. (2001). “Dam removal: Panacea or pandora for rivers?” Hydrol. Process., 15(8), 1531–1532.
Grass, A. (1971). “Structural features of turbulent flow over smooth and rough boundaries.” J. Fluid Mech., 50(2), 233–255.
Hardy, R. J., Best, J. L., Lane, S. N., and Carbonneau, P. E. (2009). “Coherent flow structures in a depth-limited flow over a gravel surface: The role of near-bed turbulence and influence of Reynolds number.” J. Geophys. Res., 114(F01003), 1–18.
Hardy, R. J., Best, J. L., Lane, S. N., and Carbonneau, P. E. (2010). “Coherent flow structures in a depth-limited flow over a gravel surface: The influence of surface roughness.” J. Geophys. Res., 115(F03006), 1–22.
Hardy, R. J., Best, J. L., Parsons, D. R., and Keevil, G. M. (2011). “On determining the geometric and kinematic characteristics of coherent flow structures over a gravel bed: A new approach using combined PLIF-PIV.” Earth Surf. Process. Landforms, 36(2), 279–284.
Hassan, M. A., and Church, M. (2000). “Experiments on surface structure and partial sediment transport on gravel bed.” Water Resour. Res., 36(7), 1885–1895.
Hassan, M. A., and Reid, I. (1990). “The influence of microform bed roughness elements on flow and sediment transport in gravel bed rivers.” Earth Surf. Process. Landforms, 15(8), 739–750.
Iseya, F., and Ikeda, H. (1987). “Pulsations in bedload transport rates induced by a longitudinal sediment sorting: A flume study using sand and gravel mixtures.” Geografiska Annaler, 69(1), 15–27.
Jimenez, J. (2004). “Turbulent flows over rough walls.” Ann. Rev. Fluid Mech., 36, 173–196.
Judd, H. E., and Peterson, D. F. (1969). Hydraulics of large bed element channels, Utah Water Research Laboratory, Logan, UT.
King, J., Nickling, W. G., and Gillies, J. A. (2008). “Investigations of the law-of-the-wall over sparse roughness elements.” J. Geophys. Res., 113(F02S07), 1–11.
Kondolf, G. M. (1997). “Hungry water: Effects of dams and gravel mining on river channels.” Environ. Manage., 21(4), 533–551.
Lacey, R. W. J., and Roy, A. G. (2008a). “Fine-scale characterization of the turbulent shear layer of an instream pebble cluster.” J. Hydraul. Eng., 134(7), 925–936.
Lacey, R. W. J., and Roy, A. G. (2008b). “The spatial characterization of turbulence around large roughness elements in a gravel-bed river.” Geomorphology, 102(3–4), 542–553.
Lamarre, H., and Roy, A. G. (2005). “Reach scale variability of turbulent flow characteristics in a gravel-bed river.” Geomorphology, 68(1–2), 95–113.
Lamberti, A., and Paris, E. (1992). “Analysis of armouring processes through laboratory experiments.” Chapter_5, Dynamics of gravel-bed rivers, Billi, P., Hey, R. D., Thorne, C. R., and Tacconi, P., eds., Wiley, Chichester, UK, 227–250.
Lawless, M. R., Lane, S. N., and Best, J. L. (2004). “The junction vortex system: Time-mean and instantaneous flow fields.” Chapter 14, Shallow flows, Taylor and Francis, London, 117–124.
Lu, S. S., and Willmarth, W. W. (1973). “Measurements of the structure of the Reynolds stress in a turbulent boundary layer.” J. Fluid Mech., 60(3), 481–511.
Lyn, D. A. (1993). “Turbulence measurements in open-channel flows over artificial bed forms.” J. Hydraul. Eng., 119(3), 306–326.
Maddux, T. B., McLean, S. R., and Nelson, J. M. (2003a). “Turbulent flow over three-dimensional dunes: 2. Fluid and bed stresses.” J. Geophys. Res., 108(6010), 1–17.
Maddux, T. B., Nelson, J. M., and McLean, S. R. (2003b). “Turbulent flow over three-dimensional dunes: 1. Free surface and flow response.” J. Geophys. Res., 108(6009), 1–20.
Martin, V., Fisher, T., Millar, R., and Quick, M. (2002). “ADV data analysis for turbulent flows: Low correlation problem.” Proc., EWRI and IAHR Int. Conf. on Hydraulic Measurements and Experimental Methods, ASCE, Estes Park, CO.
Morris, H. M. (1955). “Flow in rough conduits.” Trans. ASCE, 120, 373–398.
Nakagawa, H., and Nezu, I. (1977). “Prediction of the contributions to the Reynolds stress from bursting events in open-channel flows.” J. Fluid Mech., 80(01), 99–128.
Ojha, S. P., and Mazumder, B. S. (2010). “Turbulence characteristics of flow over a series of 2-D bed forms in the presence of surface waves.” J. Geophys. Res., 115(F04016), 1–15.
Oldmeadow, D. F., and Church, M. (2006). “A field experiment on streambed stabilization by gravel structures.” Geomorphology, 78(3–4), 335–350.
Papanicolaou, A. N., Diplas, P., Dancey, C. L., and Balakrishnan, M. (2001). “Surface roughness effects in near-bed turbulence: Implications to sediment entrainment.” J. Eng. Mech., 127(3), 211–218.
Parker, G., Klingeman, P. C., and McLean, D. G. (1982). “Bedload and size distribution in paved gravel-bed streams.” J. Hydraul. Div., 108(4), 544–571.
Peakall, J., Ashworth, P. J., and Best, J. L. (1996). “Physical modelling in fluvial geomorphology: Principles, applications, and unresolved issues.” The Scientific Nature of Geomorphology: Proc., 27th Binghamton Symp. in Geomorphology, Wiley, Chichester, UK, 221–253.
Reidenbach, M. A., Limm, M., Hondzo, M., and Stacey, M. T. (2010). “Effects of bed roughness on boundary layer mixing and mass flux across the sediment-water interface.” Water Resour. Res., 46(W07530), 1–15.
Rice, S., and Church, M. (1996). “Sampling surficial fluvial gravels: The precision of size distribution percentile estimates.” J. Sediment. Res., 66(3), 654–665.
Richards, K., and Clifford, N. J. (1991). “Fluvial geomorphology: Structured beds in gravelly rivers.” Prog. Phys. Geogr., 15(4), 407–422.
Roussinova, V., Balachandar, R., and Biswas, N. (2009). “Reynolds stress anisotropy in open-channel flow.” J. Hydraul. Eng., 135(10), 812–824.
Roy, A., Buffin-Bélanger, T., Lamarre, H., and Kirkbride, A. D. (2004). “Size, shape and dynamics of large-scale turbulent flow structures in a gravel-bed river.” J. Fluid Mech., 500(1), 1–27.
Shao, Y., and Yang, Y. (2008). “A theory for drag partition over rough surfaces.” J. Geophys. Res., 113(F02S05), 1–9.
Sharp, J. J. (1981). Hydraulic modeling, Butterworths, London.
Shen, H. W., and Lu, J. (1983). “Development and prediction of bed armoring.” J. Hydraul. Eng., 109(4), 611–629.
Sirovich, L., and Karlsson, S. (1997). “Turbulent drag reduction by passive mechanisms.” Nature, 388, 753–755.
Strom, K. B., and Papanicolaou, A. N. (2007). “ADV measurements around a cluster microform in a shallow mountain stream.” J. Hydraul. Eng., 133(12), 1379–1389.
Strom, K. B., and Papanicolaou, A. N. (2008). “Morphological characterization of cluster microforms.” Sedimentology, 55(1), 137–153.
Strom, K., Papanicolaou, A. N., Evangelopoulos, N., and Odeh, M. (2004). “Microforms in gravel bed rivers: Formation, disintegration, and effects on bedload transport.” J. Hydraul. Eng., 130(6), 554–567.
Tennekes, H., and Lumley, J. L. (1972). A first course in turbulence, MIT Press, Cambridge, MA.
Thoroddsen, S. T., Etoh, T. G., and Takehara, K. (2008). “High-speed imaging of drops and bubbles.” Ann. Rev. Fluid Mech., 40, 257–285.
Venditti, J. G. (2007). “Turbulent flow and drag over fixed two- and three-dimensional dunes.” J. Geophys. Res., 112(F04008), 1–21.
Venditti, J. G., and Bennett, S. J. (2000). “Spectral analysis of turbulent flow and suspended sediment transport over fixed dunes.” J. Geophys. Res., 105(C9), 22035–22047.
Vericat, D., Batalla, R. J., and Garcia, C. (2006). “Breakup and reestablishment of the armour layer in a large gravel-bed river below dams: The lower ebro.” Geomorphology, 76(1–2), 122–136.
Wilcock, P. R., Kenworthy, S. T., and Crowe, J. C. (2001). “Experimental study of the transport of mixed sand and gravel.” Water Resour. Res., 37(12), 3349–3358.
Williams, G. P., and Wolman, M. G. (1984). Downstream effects of dams on alluvial rivers, United States Geological Survey, Washington, DC.
Wolman, M. G. (1954). “A method of sampling coarse river-bed material.” Trans. Am. Geophys. Union, 35(6), 951–956.
Yang, S.-Q., and Tan, S.-K. (2008). “Flow resistance over mobile bed in an open-channel flow.” J. Hydraul. Eng., 134(7), 937–948.
Information & Authors
Information
Published In
Journal of Hydraulic Engineering
Volume 138 • Issue 12 • December 2012
Pages: 1031 - 1044
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Nov 23, 2011
Accepted: May 14, 2012
Published online: Nov 15, 2012
Published in print: Dec 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.