Numerical Modeling Study of Hydraulic Impact of a Large Sediment Capping Facility
Publication: Journal of Hydraulic Engineering
Volume 138, Issue 7
Abstract
An engineered containment facility (ECF) that would cap and contain some of the most contaminated sediments in Hamilton Harbour has been proposed. Because of the size and shape of this structure, the ECF will alter local flow hydraulic conditions and isolate local discharges and intakes from free interaction with the open water of the harbour. To investigate the impact and functionality of the ECF, a three-dimensional (3D) hydraulic model was adopted in this study. The model was verified against vertical velocity profiles measured with an acoustic doppler current profiler in the study region. Results of the verification reveal that under the driving force of wind, the best agreement between simulated and measured currents occurs in the surface layer. Considering the complex nature of the hydraulic conditions in the harbour, the model performs reasonably well. Overall, the model should provide a useful tool considering and comparing hydraulic conditions under different ECF configurations and the existing condition. The functionality of a newly created connection channel used for the purpose of improving local water quality was studied in detail with some unexpected discoveries.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The present study was financially supported by the Hamilton Port Authority through Environment Canada. Thanks to Arcadis BBL for valuable information, support, and suggestions. The contributions made by CO-OP student Charlotte Curtis are greatly appreciated. Without her intelligent assistance, this study would not have been completed within the very tight time frame. The comments by two editors and three anonymous reviewers have also improved the quality of the paper.
References
Bennett, J. R. (1977). “A three-dimensional model of Lake Ontario’s summer circulation. Part I: Comparison with observations.” J. Phys. Oceanogr.JPYOBT, 7(4), 591–601.
Chevalier, C., Sehested Hansen, I., Rasmussen, E. K., and Vested, H. J. (2007). “Modelling thermal plumes—Odense fjord example.” Houille BlancheHOBLAB, 5(Oct.), 29–36.
Danish Hydraulic Institute. (2005). “Estuarine and coastal hydraulics and oceanography user guide.” MIKE 3 user guide, Horsholm, Denmark.
Falconer, R. A., George, D. G., and Hall, P. (1991). “Three-dimensional numerical modelling of wind-driven circulation in a shallow homogeneous lake.” J. Hydrol. (Amsterdam)JHYDA7, 124(1/2), 59–79.
Hamblin, P. F., and He, C. (2003). “Numerical models of the exchange flows between Hamilton Harbour and Lake Ontario.” J. Civ. Eng., 30(1), 168–180.
Hollan, E., and Simons, T. J. (1978). “Wind-induced changes of temperature and currents in Lake Constance.” Meteorol. Atmos. Phys.MAPHEU, 27(3/4), 333–373.
James, W., and Eid, B. (1978). “A three-dimensional model of Hamilton Harbour incorporating spatial distribution of transient surface drag.” Can. J. Civ. Eng.CJCEB8, 5(4), 479–488.
Lawrence, G. A., et al. (2004). “Summer exchange between Hamilton Harbour and Lake Ontario.” Deep Sea Res. II: Top. Stud. Oceanogr.DSROEK, 51(4/5), 475–487.
Lessin, G., and Raudsepp, U. (2007). “Modelling the spatial distribution of phytoplankton and inorganic nitrogen in Narva Bay, southeastern Gulf of Finland, in the biologically active period.” Ecol. Model.ECMODT, 201(3–4), 348–358.
Rasmussen, E. B., Driscoll, A., Wu, T. S., and Copp, R. (2004). “Nested hydrodynamic modelling using the MIKE 3 model.” Proc., 8th International Conference on Estuarine and Coastal Modelling, ASCE, New York, 949–968.
Rao, Y. R., Marvin, C. H., and Zhao, J. (2009). “Application of a numerical model for circulation, temperature and pollutant distribution in Hamilton Harbour.” J. Great Lakes Res.JGLRDE, 35(1), 61–73.
Simons, T. J. (1980). “Circulation models of lakes and inland seas.” Canadian Bulletin of Fisheries and Aquatic Sciences, Bulletin 203, Dept. of Fisheries and Oceans, Ottawa.
Tsanis, I. K., and Wu, J. (1992). “Modelling current movements in Hamilton Harbour.” Ph.D. thesis, Dept. of Civil Engineering, McMaster Univ., Hamilton, ON.
Wu, J. (1993). “An integrated hydrodynamic and pollutant transport model for the nearshore area of the Great Lakes and their tributaries.” Ph.D. thesis, Dept. of Civil Engineering, McMaster Univ., Hamilton, ON.
Wu, J., Tsanis, I. K., and Chiocchio, F. (1996). “Observed currents and water levels in Hamilton Harbour.” J. Great Lakes Res.JGLRDE, 22(2), 224–240.
Wu, J. (1980). “Wind-stress coefficients over sea surface and near neutral conditions—A revisit.” J. Phys. Oceanogr.JPYOBT, 10(5), 727–740.
Wu, J. (1994). “The sea surface is aerodynamically rough even under light winds.” Boundary Layer Meteorol., 69(1/2), 149–158.
Zhang, Q. Y. (2006). “Comparison of two three-dimensional hydrodynamic modelling systems for coastal tidal motion.” Ocean Eng.OCENBQ, 33(2), 137–151.
Information & Authors
Information
Published In
Copyright
© 2012. American Society of Civil Engineers.
History
Received: May 29, 2011
Accepted: Feb 23, 2012
Published online: Jun 15, 2012
Published in print: Jul 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.