Arced Labyrinth Weirs
Publication: Journal of Hydraulic Engineering
Volume 138, Issue 6
Abstract
The discharge capacity and hydraulic efficiency of a labyrinth weir can be increased with an Arced cycle configuration. An Arced geometric layout for labyrinth weirs is presented, including nomenclature for arc-specific geometric variables. Discharge coefficients as a function of for half-round trapezoidal Arced labyrinth weirs with 6 and 12° sidewall angles are also presented. The hydraulic performance of the tested Arced labyrinth weir geometries is compared to Projecting and in-channel labyrinth configurations and to an arced weir (horseshoe weir) with a half-round crest, including the effects of approaching flow conditions and local submergence. Differences between geometrically similar and geometrically comparable Arced labyrinth weirs are identified and discussed.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Funding for this study was provided by the State of Utah and the Utah Water Research Laboratory (Utah State University).
References
Copeland, R., and Fletcher, B. (2000). “Model study of Prado Spillway, California, hydraulic model investigation.” Rep. ERDC/CHL TR-00-17, U.S. Army Corps of Engineers, Research and Development Center.
Crookston, B. M. (2010). “Labyrinth weirs.” Ph.D. thesis, UT State Univ., Logan, UT.
Darvas, L. (1971). “Discussion of ‘Performance and design of labyrinth weirs’, by Hay and Taylor.” J. Hydraul. Eng., 97(80), 1246–1251.
Falvey, H. (2003). Hydraulic design of labyrinth weirs, ASCE, Reston, VA.
Gentilini, B. (1941). “Stramazzi con cresta a planta obliqua e a zig-zag.” L’energia Electrica, XVIII(X), 653–664 (in Italian).
Hay, N., and Taylor, G. (1970). “Performance and design of labyrinth weirs.” J. Hydraul. Div.JYCEAJ, 96(11), 2337–2357.
Hinchliff, D., and Houston, K. (1984). “Hydraulic design and application of labyrinth spillways.” Proc., of 4th Annual USCOLD Lecture, Dam Safety and Rehabilitation, Bureau of Reclamation, US Dept. of the Interior, Washington, DC.
Kline, S., and McClintock, F. (1953). “Describing uncertainties in single-sample experiments.” Mech. Eng.ASMSA4, 75(1), 3–8.
Kozák, M., and Sváb, J. (1961). “Tort alaprojzœ bukók laboratóriumi vizsgálata.” Hidrológiai Közlöny, (5), (in Hungarian).
Lopes, R., Matos, J., and Melo, J. (2006). “Discharge capacity and residual energy of labyrinth weirs.” Proc., of the Int. Junior Researcher and Engineer Workshop on Hydraulic Structures (IJREWHS ‘06), Montemor-o-Novo, Hydraulic Model Report No. CH61/06, Div. of Civil Engineering, the Univ. of Queensland, Brisbane, Australia, 47–55.
Lopes, R., Matos, J., and Melo, J. (2008). “Characteristic depths and energy dissipation downstream of a labyrinth weir.” Proc., of the Int. Junior Researcher and Engineer Workshop on Hydraulic Structures (IJREWHS ‘08), Pagliara, S., Edizion: PLUS, University of Pisa, Italy.
Lux, F. III, and Hinchliff, D. (1985). “Design and construction of labyrinth spillways.” 15th Congress ICOLD, Vol. IV, Q59-R15, ICOLD, Paris, 249–274.
Magalhães, A., and Lorena, M. (1989). “Hydraulic design of labyrinth weirs.” Rep. No. 736, National Laboratory of Civil Engineering, Lisbon, Portugal.
Melo, J., Ramos, C., and Magalhães, A. (2002). “Descarregadores com soleira em labirinto de um ciclo em canais convergentes. Determinação da capacidad de vazão.” Proc., 6° Congresso da Água, Porto, Portugal, Portuguese Water Resources Association (APRH), Lisbon, Portugal (in Portuguese).
Page, D., García, V., and Ninot, C. (2007). “Aliviaderos en laberinto. presa de María Cristina.” Ingeniería CivilINCVAG, 146, 5–20 (in Spanish).
Taylor, G. (1968). “The performance of labyrinth weirs.” Ph.D. thesis, Univ. of Nottingham, Nottingham, England.
Tullis, P. (1992). “Weatherford Spillway model study.” Hydraulic Rep. No. 311, UT Water Research Laboratory, Logan, UT.
Tullis, P., Amanian, N., and Waldron, D. (1995). “Design of labyrinth weir spillways.” J. Hydraul. Eng., 121(3), 247–255.
Tullis, B., Young, J., and Chandler, M. (2007). “Head-discharge relationships for submerged labyrinth weirs.” J. Hydraul. Eng., 133(3), 248–254.
Willmore, C. (2004). “Hydraulic characteristics of labyrinth weirs.” M.S. report, UT State Univ., Logan, UT.
Yildiz, D., and Üzücek, E. (1996). “Modeling the performance of labyrinth spillways.” Int. J. Hydropower Dams, 3, 71–76.
Information & Authors
Information
Published In
Copyright
© 2012. American Society of Civil Engineers.
History
Received: Mar 15, 2011
Accepted: Jan 3, 2012
Published online: Jan 5, 2012
Published in print: Jun 1, 2012
Published ahead of production: Jun 15, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.