Stochastic Analysis of Water Hammer and Applications in Reliability-Based Structural Design for Hydro Turbine Penstocks
Publication: Journal of Hydraulic Engineering
Volume 137, Issue 11
Abstract
The randomness of transient events, and the variability of its associated dependencies, ensures that water hammer and surges in a pressurized pipe system are inherently stochastic. To improve reliability-based structural design, a stochastic transient model is developed for water conveyance systems in hydropower plants. The statistical characteristics of key factors in boundary conditions, initial states, and hydraulic system parameters are analyzed on the basis of a large record of observed data from hydro plants in China; the probability distributions of annual maximum water hammer pressures are then simulated by using a Monte Carlo method and verified with an analytical probabilistic model for a simplified pipe system. The key loading characteristics (annual occurrence, sustaining period, and probability distribution) are introduced and discussed. By using an example of penstock structural design, it is shown that the total water hammer pressure should be split into two individual random variable loads—the steady/static pressure and the water hammer pressure rise during transients—and that different partial load factors should be applied to individual loads to reflect specific physical and stochastic features. Particularly, the normative load (usually the unfavorable value at a 95-percentage level) for steady/static hydraulic pressure should be taken from the probability distribution of its maximum values over a pipe’s design life, whereas for the water hammer pressure rise, as the second variable load, the probability distribution of its annual maximum values determines its normative load.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The first author’s participation in writing this submission was acting in her own independent capacity and not on behalf of UT-Battelle, LLC, or its affiliates or successors.
References
Ang, A. H. S., and Tang, W. H. (1984). Probability concepts in engineering planning and design, Vol. II: Decision, risk, and reliability, Wiley, New York.
ASCE Task Committee on Geostatistical Techniques in Geohydrology of the Ground Water Hydrology Committee of the ASCE Hydraulics Division. (1990a). “Review of geostatistics in geohydrology: I. Basic concepts.” J. Hydraul. Eng., 116(5), 612–632.
ASCE Task Committee on Geostatistical Techniques in Geohydrology of the Ground Water Hydrology Committee of the ASCE Hydraulics Division. (1990b). “Review of geostatistics in geohydrology: II. Applications.” J. Hydraul. Eng., 116(5), 633–658.
Bao, Y., and Mays, L. W. (1990). “Model for water distribution system reliability.” J. Hydraul. Eng., 116(9), 1119–1137.
Bao, Y., and Mays, L. W. (1994). “New methodology for optimization of freshwater inflows to estuaries.” J. Water Resour. Plann. Manage., 120(2), 199–217.
Buhman, D. L., Gates, T. K., and Watson, C. C. (2002). “Stochastic variability of fluvial hydraulic geometry: Mississippi and Red Rivers.” J. Hydraul. Eng., 128(4), 426–437.
Burrall, K. M. (2009). “Stochastic optimization of hydroelectric dam operations on the Biobio River in Chile.” M.S. thesis, Dept. of Civil and Environmental Engineering, Massachusetts Institute of Technology, Cambridge, MA. 〈http://hdl.handle.net/1721.1/50624〉, (Feb. 16, 2011).
Carriaga, C. C., and Mays, L. W. (1995). “Optimization modeling for sedimentation in alluvial rivers.” J. Water Resour. Plann. Manage., 121(3), 251–259.
Chaudhry, H. M. (1979). Chapter 3, Applied hydraulic transients, Van Nostrand Reinhold, New York, 44.
Cheong, H. F., and Shen, H. W. (1983). “Statistical properties of sediment movement.” J. Hydraul. Eng., 109(12), 1577–1588.
Chiu, C. L. (1991). “Application of entropy concept in open-channel flow study.” J. Hydraul. Eng., 117(5), 615–628.
Chiu, C. L. (1993). “Application of probability and entropy concepts in pipe-flow study.” J. Hydraul. Eng., 119(6), 742–756.
Chiu, C. L., and Tung, N. C. (2002). “Maximum velocity and regularities in open-channel flow.” J. Hydraul. Eng., 128(4), 390–398.
Chow, V. T. (1972). “Hydrologic modeling—The seventh John R. Freeman memorial lecture.” Proc., Boston Soc. Civ. Eng., 60(5), 1–27.
Clifford, N. J., Wright, N. G., Harvey, G., Gurnell, A. M., Harmar, O. P., and Soar, P. J. (2010). “Numerical modeling of river flow for ecohydraulic applications: Some experiences with velocity characterization in field and simulated data.” J. Hydraul. Eng., 136(12), 1033–1041.
Cullinane, M. J., Lansey, K. E., and Mays, L. W. (1992). “Optimization-availability-based design of water-distribution networks.” J. Hydraul. Eng., 118(3), 420–441.
Diogo, A. F., and Graveto, V. M. (2006). “Optimal layout of sewer systems: A deterministic versus a stochastic model.” J. Hydraul. Eng., 132(9), 927–943.
Duan, H. F., Tung, Y. K., and Ghidaoui, M. S. (2010). “Probabilistic analysis of transient design for water supply systems.” J. Water Resour. Plann. Manage., 136(6), 678–687.
Duan, N., and Mays, L. W. (1990). “Reliability analysis of pumping systems.” J. Hydraul. Eng., 116(2), 230–248.
Duan, N., Mays, L. W., and Lansey, K. E. (1990). “Optimal reliability-based design and analysis of pumping systems for water distribution systems.” J. Hydraul. Eng., 116(2), 249–268.
Frick, D. M., Bode, D., and Salas, J. D. (1990). “Effect of drought on urban water supplies. I: Drought analysis.” J. Hydraul. Eng., 116(6), 733–753.
Fujiwara, O., and Silva, A. U. (1990). “Algorithm for reliability-based optimal design of water networks.” J. Environ. Eng., 116(3), 575–587.
Gargano, R., and Pianese, D. (2000). “Reliability as tool for hydraulic network planning.” J. Hydraul. Eng., 126(5), 354–364.
Goulter, I. C., and Coals, A. V. (1986). “Quantitative approaches to reliability assessment in pipe networks.” J. Transp. Eng., 112(3), 287–301.
Guo, W., and Suo, L. (1996). “Stochastic analysis of water-hammer pressure in a reservoir-pipe-valve system.” J. Hydroelec. Eng., 55(4), 72–80 (in Chinese).
Hayter, A. J. (1995). Probability and statistics for engineers and scientists, PWS, Boston.
Hu, C., and Guo, Q. (2010). “Near-bed sediment concentration distribution and basic probability of sediment movement.” J. Hydraul. Eng., in press.
Hugo, A., et al. (1992). “Review of ground-water quality monitoring network design.” J. Hydraul. Eng., 118(1), 11–37.
Joy, D. M., Lennox, W. C., and Kouwen, N. (1993). “Stochastic model of particulate transport in porous medium.” J. Hydraul. Eng., 119(7), 846–861.
Korving, H., Clemens, F. H. L. R., and Noortwijk, J. M. (2006). “Statistical modeling of the serviceability of sewage pumps.” J. Hydraul. Eng., 132(10), 1076–1085.
Kuo, J. T., Yen, B. C., Hsu, Y. C., and Lin, H. F. (2007). “Risk analysis for dam overtopping—Feitsui Reservoir as a case study.” J. Hydraul. Eng., 133(8), 955–963.
Lansey, K. E., Duan, N., Mays, L. W., and Tung, Y. K. (1989). “Model for water distribution system design under uncertainties.” J. Water Resour. Plann. Manage., 115(5), 630–645.
Lansey, K. E., and Mays, L. W. (1989). “Optimization model for water distribution system design.” J. Hydraul. Eng., 115(10), 1401–1418.
Liu, Q. (1997). Hydropower station, version 3, China Hydroelectric Power, Beijing (in Chinese).
Lu, Y. J., and Wang, Z. Y. (2009). “3D numerical simulation for water flows and sediment deposition in dam areas of the Three Gorges Project.” J. Hydraul. Eng., 135(9), 755–769.
Magagnato, F. (2001). “The modeling of unsteady turbulent flows in turbomachines.” TASK Quarterly, 5(4), 477–494.
Mays, L. W. (1979). “Optimal design of culverts under uncertainties.” J. Hydraul. Div., 105(5), 443–460.
Mays, L. W., and Yen, B. C. (1975). “Optimal cost design of branched sewer systems.” Water Resour. Res., 11(1), 37–47.
Mei, R., and Adrian, R. J. (1992). “Flow past a sphere with an oscillation in the free stream velocity and unsteady drag at finite Reynolds number.” J. Fluid Mech., 237, 323–341.
Melching, C. S., Yen, B. C., and Wenzel, H. G. (1991). “Output reliability as guide for selection of rainfall-runoff models.” J. Water Resour. Plann. Manage., 117(3), 383–398.
Ministry of Construction. (1994). “Unified design standard for reliability of hydraulic engineering structures.” GB 50199-94, China Planning Press, Beijing (in Chinese).
Ministry of Construction. (1998). “National standard of the People’s Republic of China: Code for design of steel structures.” GBJ 17-88, Dept. of Standards and Norms, Beijing (in Chinese).
Ministry of Power Industry (MPI), Ministry of Water Resources. (1997). “Design standards for hydraulic structure loads—Waterhammer pressure.” DL 5077, East China Investigation and Design Institute (HydroChina Huadong Eng. Corp.), P.R. China.
Ministry of Water Resources and Electric Power. (1985). “Design standards: Hydropower station penstock design method.” SD144-85, Beijing.
Nagata, N., Hosoda, T., Nakato, T., and Muramoto, Y. (2005). “Three-dimensional numerical model for flow and bed deformation around river hydraulic structures.” J. Hydraul. Eng., 131(12), 1074–1087.
Nakagawa, H., and Tsujimoto, T. (1984). “Spectral analysis of sand bed instability.” J. Hydraul. Eng., 110(4), 467–483.
Nino, Y., and Garcia, M. (1998). “Experiments on saltation of sand in water.” J. Hydraul. Eng., 124(10), 1014–1025.
Paik, J., Sotiropoulos, F., and Sale, M. J. (2005). “Numerical simulation of swirling flow in complex hydroturbine draft tube using unsteady statistical turbulence models.” J. Hydraul. Eng., 131(6), 441–456.
Paintal, A. S. (1971). “Concept of critical shear stress in loose boundary open channels.” J. Hydraul. Res., 9(1), 91–113.
Papanicolaou, A., and Thanos, N. (2002). “Stochastic fluvial hydraulics.” J. Hydraul. Eng., 128(4), 364–364.
Pejovic, S., Boldy, A. P., and Obradovic, D. (1987). “Control system.” Chapter 4, Guidelines to hydraulic transient analysis, Gower Technical, Hants, England, 30–31.
Plate, E. J. (2002). “Flood risk and flood management.” J. Hydrol. (Amsterdam), 267(1-2), 2–11.
Pothot, I. W. M., and Lemmens, R. P. M. (2001). “WP1-Standards and ground-rules, ground-rules proposal.” Transient pressure in pressurized conduits for municipal water and sewage water transport, Project SMT4-CT97-2188, European Commission.
Revell, R., and Ridolfi, L. (2002). “Fuzzy approach for analysis of pipe networks.” J. Hydraul. Eng., 128(1), 93–101.
Riva, M., Guadagnini, A., Neuman, S. P., Janetti, E. B., and Malama, B. (2009). “Inverse analysis of stochastic moment equations for transient flow in randomly heterogeneous media.” Adv. Water Resour., 32(10), 1495–1507.
Rougier, J., and Goldstein, M. (2001). “A Bayesian analysis of fluid flows in pipelines.” J. R. Stat. Soc: C., Appl. Stat., 50(1), 77–93.
Schweizer, S., Borsuk, M. E., Jowett, I., and Reichert, P. (2007). “Predicting joint frequency distributions of depth and velocity for instream habitat assessment.” River Res. Appl., 23(3), 287–302.
Sekine, M., and Kikkawa, H. (1992). “Mechanics of saltating grains. II.” J. Hydraul. Eng., 118(4), 536–558.
Sin, G., Gernaey, K. V., Neumann, M. B., van Loosdrecht, M. C. M., and Gujer, W. (2009). “Uncertainty analysis in WWTP model applications: A critical discussion using an example from design.” Water Res., 43(11), 2894–2906.
Su, Y. C., Mays, L. W., Duan, N., and Lansey, K. E. (1987). “Reliability-based optimization model for water distribution systems.” J. Hydraul. Eng., 113(12), 1539–1556.
Tang, W. H., and Yen, B. C. (1972). “Hydrologic and hydraulic design under uncertainties.” Proc., Int. Symp. on Uncertainties on Hydro, and Water Resource Systems, Vol. 2, Univ. of Arizona, Tucson, Ariz., 868–882.
Tang, W. H., Yen, B. C., and Mays, L. W. (1975). “Optimal risk-based design of storm sewer networks.” J. Environ. Eng. Div. (Am. Soc. Civ. Eng.), 101(3), 381–398.
Tanyimboh, T. T., Tabesh, M., and Burrows, M. (2001). “Appraisal of source head methods for calculating reliability of water distribution networks.” J. Water Resour. Plann. Manage., 127(4), 206–213.
Tarkus, M., Volkmann, C., Drexler, S. S., Waidbacher, H., and Straif, M. (2010). “Assessment of the ecological functionality of anthropogenically created habitats in the impoundment of the hydropower plant Freudenau (Vienna, Austria) with bi- and multivariate statistical analyses.” Zoologia (Curitiba, Impresso), 27(1), 92–98.
ten Brummelhuis, P. G. J., de Jong, B., and Heemink, A. W. (1988). “Stochastic dynamic approach to predict water levels in estuaries.” J. Hydraul. Eng., 114(11), 1339–1358.
Tung, Y. K. (1987). “Effects of uncertainties on optimal risk-based design of hydraulic structures.” J. Water Resour. Plann. Manage., 113(5), 709–722.
Tung, Y. K., and Mays, L. W. (1981). “Risk models for flood levee design.” Water Resour. Res., 17(4), 833–841.
Wang, J. (2001). “Hydrology statistics.” Hohai University, Nanjing, China (in Chinese).
Wang, P., and Linker, L. C. (2008). “Improvement of regression simulation in fluvial sediment loads.” J. Hydraul. Eng., 134(10), 1527–1531.
Wiggert, D. (1999). “Propagation of uncertainties in fluid transient analysis.” Proc., 3rd ASME/JSME Joint Fluids Engineering Conf., ASME, New York, 167–175.
Wu, S., Zhang, S., and Yu, Q. (1984). “Statistical values for annual maximum of water level at upstream of dams.” J. Hohai Univ., 12(4), 66–71(in Chinese).
Wylie, E. B., Streeter, V. L., and Suo, L. (1993). Fluid transients in systems, Prentice-Hall, Englewood Cliffs, NJ.
Xu, Y. P., and Tung, Y. K. (2008). “Decision-making in water management under uncertainty.” Water Resour. Manage., 22(5), 535–550.
Yeh, K. C., and Tung, Y. K. (1993). “Uncertainty and sensitivity analyses of pit-migration model.” J. Hydraul. Eng., 119(2), 262–283.
Yen, B. C. (1988a). “Stochastic methods and reliability analysis in water resources.” Adv. Water Resour., 11(3), 115–122.
Yen, B. C. (1988b). “Significance of nonuniform, unsteady and nonequilibrium conditions in fluvial channels.” Proc. IAHR Int. Conf. Fluvial Hydraulics, Delft, Netherlands, 112–118.
Yen, B. C. (2002). “Stochastic inference to sediment and fluvial hydraulics.” J. Hydraul. Eng., 128(4), 365–367.
Zhang, Q., and Suo, L. (1997). “Stochastic model for surge analysis.” J. Hohai Univ., 25(3), 41–45 (in Chinese).
Zhang, Q., and Suo, L. (1998). “Advances on stochastic analysis of water-hammer and surge.” J. Adv. Sci. Technol. Water Resour., 18(3), 7–11 (in Chinese).
Zhang, Q., and Suo, L. (2000). “Application of stochastic analysis of water-hammer in structural design of penstocks.” J. Hohai Univ., 28(2), 17–22 (in Chinese).
Zhang, Q., Suo, L., and Guo, W. (2000a). “A further study of stochastic analysis of water-hammer pressure in a reservoir-pipe-valve system.” J. Hydroelectric Eng., 69(2), 56–63 (in Chinese).
Zhang, Q., Suo, L., and Guo, W. (2000b). “Stochastic analysis of waterhammer in a reservoir-pipe-valve system.” Proc., 8th Int. Symp. on Stochastic Hydraulics (ISSH 2000), Beijing, 25–28.
Zhang, Q., Zhu, D., and Wang, M. (1994). “Application of maximum entropy law in calculating suspended sand concentration profile.” J. Waterway and Harbor, 2, 21–25 (in Chinese).
Zhang, X., Suo, L., Hu, A., and Chen, M. (2003). “Study of dependence between the steady state pressure and waterhammer pressure for penstock loads.” Des. Hydroelectr. Power Stn., 19(3), 18–19 (in Chinese).
Zhao, B., and Mays, L. W. (1996). “Uncertainty and risk analysis for FEMA alluvial-fan method.” J. Hydraul. Eng., 122(6), 325–332.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Apr 7, 2010
Accepted: Feb 25, 2011
Published online: Mar 4, 2011
Published in print: Nov 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.