Prediction of Intake Vortex Risk by Nearest Neighbors Modeling
Publication: Journal of Hydraulic Engineering
Volume 137, Issue 6
Abstract
Vortex formation at intakes can cause damage, clogging, reduced flow efficiency, and even loss of life. For practical prediction of vortex risk, engineers often compare expected design parameters with published data by using parameter proximity to evaluate the relative risk of vortex formation. Unfortunately, this procedure is ill-defined, and the resulting risk estimates are highly subjective. In response, a formal equivalent of the data proximity procedure was developed by implementing the nearest neighbors algorithm on available experimental and field data. This database was partitioned and the machine learning parameters adjusted to obtain a stochastic model with maximum predictive accuracy. Unlike the flow parameters and submergence, the approach geometry was not found to be a significant factor in the model, although this may be attributable to data noise and range of tested values. The final model, which excluded the channel approach geometry, fit all vertical intake vortex formation data to within 0.1% error and perfectly fit the horizontal intake data. Probability charts generated from the model show regions of vortex formation and problems more numerous and larger on average than regions of low vortex probability, thus validating consideration of potential vortex formation risk for conservative intake design.
Get full access to this article
View all available purchase options and get full access to this article.
References
ASCE Committee on Hydropower Intakes. (1995). “Guidelines for design of intakes for hydroelectric plants.” New York.
Coleman, H. W., Wei, C. Y., and Lindell, J. E. (1999). “Hydraulic design for energy generation.” Hydraulic Design Handbook, L. W. Mays, ed., McGraw-Hill, New York, 8.1–8.33.
Constantinescu, G. S., and Patel, V. C. (1998). “Numerical model for simulation of pump-intake flow and vortices.” J. Hydraul. Eng., 124(2), 123–134.
Constantinescu, G. S., and Patel, V. C. (2000). “Role of turbulence model in prediction of pump-bay vortices.” J. Hydraul. Eng., 126(5), 387–391.
Gordon, J. L. (1970). “Vortices at intakes.” Waterpower, Apr., 137–138.
Lu, Y.-J., Hsu, Y.-H., and Maldague, X. (1992). “Vehicle classification using infrared image analysis.” J. Transp. Eng., 118(2), 223–240.
Pennino, B. J., and Hecker, G. E. (1980). “A synthesis of model data for pumped storage intakes.” ASME Fluids Conf., Chicago.
Prairie, J. R., Rajagopalan, B., Fulp, T. J., and Zagona, E. A. (2006). “Modified -NN model for stochastic streamflow simulation.” J. Hydrol. Eng., 11(4), 371–378.
Rajendran, V. P., Constantinescu, S. G., and Patel, V. C. (1999). “Experimental validation of numerical model of flow in pump-intake bays.” J. Hydrol. Eng., 125(11), 1119–1125.
Reddy, Y. R., and Pickford, J. A. (1972). “Vortices at intakes in conventional sumps.” Waterpower, Mar., 108–109.
Rindels, A. J., and Gulliver, J. S. (1983). “An experimental study of critical submergence to avoid free-surface vortices at vertical intakes.” Project Rep. No. 224, Saint Anthony Falls Hydraulic Laboratory, Univ. of Minnesota, Minneapolis.
Sayed, T., Abdelwahab, W., and Navin, F. (1995). “Identifying accident prone locations using fuzzy pattern recognition.” J. Transp. Eng., 121(4), 352–358.
Tan, P.-N., Steinbach, M., and Kumar, V. (2006). Introduction to Data Mining, Addison-Wesley, Reading, MA.
Tokyay, T. E., and Constantinescu, S. G. (2006). “Validation of a large-eddy simulation model to simulate flow in pump intakes of realistic geometry.” J. Hydraul. Eng., 132(12), 1303–1315.
Vermeyen, T. B. (1999). “Glen Canyon Dam multi-level intake structure hydraulic model study.” Rep. R-99-02 , U.S. Dept. of the Interior, Bureau of Reclamation, Water Resources Research Laboratory, Denver.
Witten, I. H., and Frank, E. (2005). “Data mining: Practical machine learning tools with java implementations, 2nd Ed., Morgan Kaufmann, San Francisco.
Yulin, W., Yong, L., and Xiaoming, L. (2000). “PIV experiments on flow in a model pump suction sump.” Research Rep., Thermal Engineering Dept., Tsinghua Univ., Tsinghu, China.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Feb 4, 2010
Accepted: Oct 8, 2010
Published online: Nov 30, 2010
Published in print: Jun 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.