Estimation of Uncertainty in Long-Term Sewer Sediment Predictions Using a Response Database
Publication: Journal of Hydraulic Engineering
Volume 136, Issue 7
Abstract
Regulations require U.K. water companies to reduce the number of properties at risk of sewer flooding. One of the potential causes of sewer flooding is the presence of persistent sediment deposits in sewers, such deposits are a common problem in many combined sewers. Although the regulations are risk based, there is a gap in the current knowledge on how the risk assessment is affected by the uncertainty in sewer sediment transport prediction. This paper describes the development of a methodology for estimating uncertainty in sewer sediment deposit depth predictions using existing empirically calibrated sediment load equations and Monte Carlo simulations combined with a response database. This methodology has been used to estimate the range of uncertainty of in-pipe deposit build-up predictions for a U.K. combined sewer system that suffered persistent deposition problems.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ackers, P. (1972). “Sediment transport in channels: An alternative approach.” Rep. INT 102, Hydraulics Research Station, Wallingford, U.K.
Ackers, P. (1984). “Sediment transport in sewers and the design implications.” Proc., Int. Conf. on Planning, Construction, Maintenance and Operation of Sewerage Systems. BHRA (Cranfield), Reading, U.K., 215–230.
Ackers, P. (1991). “Sediment aspects of drainage and outfall design.” Proc., Int. Symp. on Environmental Hydraulics, Balkema, Rotterdam, The Netherlands.
Ackers, P., and White, W. R. (1973). “Sediment transport: New approach and analysis.” J. Hydr. Div., 99(11), 2041–2060.
Ashley, R., Bertrand-Krajewski, J. -L., and Hvitved-Jacobsen, T. (2005). “Sewer solids—20 years of investigation.” Water Sci. Technol., 52(3), 73–84.
Benedetti, L., Bixio, D., and Vanrolleghem, P. A. (2005). “Assessment of WWTP design and upgrade options: Balancing costs and risks of standards’ exceedance.” Proc., 10th Int. Conf. on Urban Drainage (CD-ROM), E. Eriksson, H. Gene-Fuhrman, J. Vollertson, A. Ledin, T. Hvitved-Jacobsen, and P. S. Mikkelsen, eds., P.S. Institute of Environment & Resources Technical Univ. of Denmark and Section of Environmental Engineering Aalborg Univ., Copenhagen, Denmark.
Bertrand-Krajewski, J. -L. (2006). “Influence of field data sets on calibration and verification of stormwater pollutant models.” Proc., 7th Conf. Urban Drainage Modelling, A. Deletic, and T. Fletcher, eds., Monash Univ., Melbourne, Australia.
Betrand-Krajewski, J. -L., Bardin, J., and Gibello, C. (2005). “Long term monitoring of sewer sediment accumulation and flushing experiments in a man-entry sewer.” Proc., 10th Int. Conf. on Urban Drainage (CD-ROM), E. Eriksson, H. Gene-Fuhrman, J. Vollertson, A. Ledin, T. Hvitved-Jacobsen, and P. S. Mikkelsen, eds., P.S. Institute of Environment & Resources Technical Univ. of Denmark and Section of Environmental Engineering Aalborg Univ., Copenhagen, Denmark.
Bixio, D., et al. (2002). “A quantitative risk analysis tool for design/simulation of wastewater treatment plants.” Water Sci. Technol., 46(4–5), 301–307.
Dahal, M. R., Petry, B., van Gelder, P. H. A. J. M., Gupta, S., and Vrijling, J. K. (2005). “Reliability analysis of flood defenses using importance sampling and response database with probabilistic loops in large hydraulic models.” Proc., ISSH—Stochastic Hydraulics, J. . Vrijling, E. Ruijgh, B. Stalenberg, P. H. A. J. M. Van Gelder, M. Verlaan, A. Zijderveld, and P. Waarts, eds., IAHR, Madrid, Spain.
De Sutter, R., Rushforth, P., Tait, S., Huygens, M., Verhoeven, R., and Saul, A. (2003). “Validation of existing bed load transport formulas using in-sewer sediment.” J. Hydraul. Eng., 129(4), 325–333.
Ellis, J. B. (1986). “Pollutional aspects of urban runoff.” NATO ISI series: Urban runoff pollution, H. C. Torna, J. Marsalek, and M. Desbordes, eds., Vol. G10, Springer, Berlin.
Freni, G., Mannina, G., and Viviani, G. (2009). “Identifiability analysis for receiving water body quality modelling.” Environ. Modell. Software, 24(1), 54–62.
Harremoës, P., and Madsen, H. (1999). “Fiction and reality in the modelling world—Balance between simplicity and complexity, calibration and identifiability, verification and falsification.” Water Sci. Technol., 39(9), 1–8.
Kanso, A., Chebbo, G., and Tassin, B. (2004). “Bayesian analysis for erosion modelling of sediments in combined sewer systems. Proc., Urban Drainage Modelling 2004, P. Krebs, and L. Fuchs, eds., Institute for Urban Water Management, Technische Universitat Dresden, Germany.
Kanso, A., Tassin, B., and Chebbo, G. (2005). “A benchmark methodology for managing uncertainties in urban runoff quality models.” Water Sci. Technol., 51(2), 163–170.
Khuri, A. I., and Cornell, J. A. (1987). Response surfaces: Design and analyses, Marcel Dekker, New York.
Korving, H. (2004). “Probabilistic assessment of the performance of combined sewer systems.” Ph.D. thesis, Technische Universiteit Delft, Delft, The Netherlands.
Laplace, D., Bachoc, A., Sanchez, Y., and Dartus, D. (1992). “Trunk sewer clogging development—Description and solutions.” Water Sci. Technol., 25(8), 91–100.
Marquart, D. W. (1963). “An algorithm for the least-squares estimation of non linear parameters.” Journal of the Society for Applied Mathematics, 11, 431–441.
Mourad, M., Bertrand-Krajewski, J. -L., and Chebbo, G. (2005). “Calibration and validation of multiple regression models for stormwater quality prediction: Data partitioning, effect of dataset size and characteristics.” Water Sci. Technol., 52(3), 45–52.
OFWAT. (2006). “Levels of service for the water industry in England and Wales.” ⟨http://www.ofwat.gov.uk/regulating/reporting/rpt_/los2005-06.pdf⟩, Office for Water Regulation, Birmingham, U.K. (May 4, 2010).
Ristenpart, E., and Uhl, M. (1993). “Dynamic behaviour of sewer sediments.” Proc., 6th Int. Conf. on Urban Storm Drainage, Vol. I, J. Marsalek, and H. C. Torno, eds., Seapoint Publishing, Victoria, B.C., Canada.
Rousseau, D., Verdonck, F., Moerman, O., Thoeye, C., Meirlaen, J., and Vanrolleghem, P. A. (2001). “Development of a risk assessment based technique for design/retrofitting of WWTPs.” Water Sci. Technol., 43(7), 287–294.
Schellart, A. N. A. (2007). “Analysis of uncertainty in the sewer sediment transport predictions used for sewer management purposes.” Ph.D. thesis, Univ. of Sheffield, U.K., submitted.
Scientific and Technical Rep. No. 14. (2004). “Solids in sewers.” R. M. Ashley, J. -L. Bertrand-Krajewski, T. Hvitved-Jacobsen, and M. Verbanck, eds., IWA Publishing, London.
Slijkhuis, K. A. H., Van Gelder, P. H. A. J. M., Vrijling, J. K., and Vrouwenvelder, A. C. W. M. (1999). “On the lack of information in hydraulic engineering models.” Proc., Esrel ’99—10th European Conf. on Safety and Reliability, G. I. Schüller and P. Kafka, eds., Munich-Garching, Germany, 713–718.
White, W. R. (1972). “Sediment transport in channels: A general function.” Rep. INT 104, Hydraulics Research Station, U.K.
Willems, P. (2001). “Stochastic description of the rainfall input errors in lumped hydrological models.” Stochastic Environ. Res. Risk Assess., 15, 132–152.
Willems, P. (2004) “Parsimonious pollutant washoff and sewer transport modelling.” Proc., Int. Conf. on Urban Drainage Modelling, P. Krebs, and L. Fuchs, eds., Institute for Urban Water Management, Technische Universitat Dresden, Germany, 461–469.
Willems, P. (2008). “Quantification and relative comparison of different types of uncertainties in sewer water quality modelling.” Water Res., 42, 3539–3551.
Wotherspoon, D. J. J. (1994). “The movement of cohesive sediment in a large combined sewer.” Ph.D. thesis, Univ. of Abertay, Dundee, Scotland.
Wynne, B. (1992). “Uncertainty and environmental learning. Reconceiving science and policy in the preventive paradigm.” Global. Environ. Change, 2(2), 111–127.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: May 6, 2008
Accepted: Dec 14, 2009
Published online: Dec 17, 2009
Published in print: Jul 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.