Apparent Shear Stress and Its Coefficient in Asymmetric Compound Channels Using Gene Expression and Neural Network
Publication: Journal of Hydrologic Engineering
Volume 24, Issue 12
Abstract
Flow interaction over the interface between main channel and floodplains affects the overall discharge capacity and discharge distribution in compound open channels. Many investigators have attempted to empirically estimate flow interaction in terms of an apparent shear stress acting on the imaginary interface between the main channel and floodplain. However, past models are neither generalized for asymmetric channels nor applied to a wide range of data sets including field data, even though the apparent shear stress for asymmetric channels is found to be higher in comparison to symmetric channels for the same depth of flow. In this paper, using gene expression programming and a back propagation neural network, a generalized dimensionless formula is proposed for predicting percentage shear force and apparent shear stress on the vertical interface between the main channel and floodplain for asymmetric compound channels. The variation of bed characteristics and their dependability on the formula has been tested against a wide range of experimental and river data reported in the previous studies. Statistical analysis shows that the formulas produced in the curve fitting through gene expression and a feedforward back propagation neural network are very satisfactory and better than past models. The exceptionally high accuracy of the proposed models implies that they can be extended to use for a wide range of applications.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to acknowledge the financial support by the National Natural Science Foundation of China (11772270) and the Key Special Fund of XJTLU (KSF-E-17). Furthermore, the authors would also like to sincerely thank all the past researchers who have given valuable experimental data sets.
References
Anguita, D., A. Ghio, S. Ridella, and D. Sterpi. 2009. “In-sample and out-of-sample model selection and error estimation for support vector machines.” IEEE Trans. Neural Network Learn. Syst., 23 (9): 1390–1406.
Atabay, S. 2001. “Stage-discharge, resistance and sediment transport relationships for flow in straight compound channels.” Ph.D. dissertation, School of Engineering, Univ. of Birmingham.
Baird, J. I., and D. A. Ervine. 1984. Resistance to flow in channels with overbank flood-plain flow. Channels and channel control structures, 561–574. Berlin: Springer.
Bhowmik, N. G. 1979. Hydraulics of flow in the Kaskaskia River, Illinois. Champaign, IL: Illinois State Water Survey.
Bousmar, D. 2002. “Flow modelling in compound channels, momentum transfer between main channel and prismatic or non-prismatic floodplains.” Unité de Génie Civil et Environ. 12: 326.
Chen, Z., Q. Chen, and L. Jiang. 2016. “Determination of apparent shear stress and its application in compound channels.” Procedia Eng. 154 (Jan): 459–466. https://doi.org/10.1016/j.proeng.2016.07.538.
Christodoulou, G. C. 1992. “Apparent shear stress in smooth compound channels.” Water Res. Manage. 6 (3): 235–247. https://doi.org/10.1007/BF00872358.
Cobaner, M., T. Haktanir, and O. Kisi. 2008. “Prediction of hydropower energy using ANN for the feasibility of hydropower plant installation to an existing irrigation dam.” Water Resour. Manage. 22 (6): 757–774. https://doi.org/10.1007/s11269-007-9190-z.
Cobaner, M., G. Seckin, N. Seckin, and R. Yurtal. 2010. “Boundary shear stress analysis in smooth rectangular channels and ducts using neural networks.” Water Environ. J. 24 (2): 133–139. https://doi.org/10.1111/j.1747-6593.2009.00165.x.
Devi, K., K. K. Khatua, and B. S. Das. 2016. “Apparent shear in an asymmetric compound channel.” In River Flow 2016. Boca Raton, FL: CRC Press.
Dorado, J., J. R. Rabunal, A. Pazos, D. Rivero, A. Santos, and J. Puertas. 2003. “Prediction and modelling of the rainfall-runoff transformation of a typical urban basin using ANN and GP.” Appl. Artif. Intell. 17 (4): 329–343. https://doi.org/10.1080/713827142.
Govindaraju, R. S. 2000. “Artificial neural networks in hydrology. I: Preliminary concepts.” J. Hydrol. Eng. 5 (2): 115–123. https://doi.org/10.1061/(ASCE)1084-0699(2000)5:2(115).
Guven, A., and A. Aytek. 2009. “New approach for stage-discharge relationship: Gene-expression programming.” J. Hydrol. Eng. 14 (8): 812–820. https://doi.org/10.1061/(ASCE)HE.1943-5584.0000044.
Guven, A., A. Aytek, M. I. Yuce, and H. Aksoy. 2007. “Genetic programming-based empirical model for daily reference evapotranspiration estimation.” CLEAN-Soil Air Water J. 36 (10–11): 905–912. https://doi.org/10.1002/clen.200800009.
Hin, L. S., N. Bessaih, L. P. Ling, A. A. Ghani, N. A. Zakaria, and M. Y. Seng. 2008. “A study of hydraulic characteristics for flow in equatorial rivers.” Int. J. River Basin Manage. 6 (3): 213–223. https://doi.org/10.1080/15715124.2008.9635349.
Huthoff, F., P. C. Roos, D. C. Augustijn, and S. J. Hulscher. 2008. “Interacting divided channel method for compound channel flow.” J. Hydraul. Eng. 134 (8): 1158–1165. https://doi.org/10.1061/(ASCE)0733-9429(2008)134:8(1158).
James, M., and B. J. Brown. 1977. Geometric parameters that influence floodplain flow. Vicksburg, MS: Army Engineer Waterways Experiment Station.
Keller, R. J., and W. Rodi. 1988. “Prediction of flow characteristics in main channel/ flood plain flows.” J. Hydraul. Res. 26 (4): 425–441. https://doi.org/10.1080/00221688809499202.
Khatua, K. K., and K. C. Patra. 2007. “Boundary shear stress distribution in compound open channel flow.” J. Hydraul. Eng. 13 (3): 39–54. https://doi.org/10.1080/09715010.2007.10514882.
Khatua, K. K., K. C. Patra, and P. K. Mohanty. 2012. “Stage-discharge prediction for straight and smooth compound channels with wide floodplains.” J. Hydraul. Eng. 138 (1): 93–99. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000491.
Khuntia, J. R., K. Devi, and K. K. Khatua. 2018. “Boundary shear stress distribution in straight compound channel flow using artificial neural network.” J. Hydrol. Eng. 23 (5): 04018014. https://doi.org/10.1061/(ASCE)HE.1943-5584.0001651.
Knight, D. W., and J. D. Demetriou. 1983. “Flood plain and main channel flow interaction.” J. Hydraul. Eng. 109 (8): 1073–1092. https://doi.org/10.1061/(ASCE)0733-9429(1983)109:8(1073).
Knight, D. W., and M. E. Hamed. 1984. “Boundary shear in symmetrical compound channels.” J. Hydraul. Eng. 110 (10): 1412–1430. https://doi.org/10.1061/(ASCE)0733-9429(1984)110:10(1412).
Knight, D. W., and K. Shiono. 1996. “River channel and floodplain hydraulics”. In Floodplain processes, edited by M. G. Anderson, D. E. Walling, and P. D. Bates, 139–181. Chichester, UK: Wiley.
Knight, D. W., and X. Tang. 2008. “Zonal discharges and boundary shear in prismatic channels.” Inst. Civ. Eng. 161 (EM2): 59–68. https://doi.org/10.1680/eacm.2008.161.2.59.
Kohavi, R. 1995. “A study of cross-validation and bootstrap for accuracy estimation and model selection.” Ijcai 14 (2): 1137–1145.
Koza, J. R. 1992. Genetic programming II, automatic discovery of reusable subprograms. Cambridge, MA: MIT Press.
Krishnappan, B. G., and Y. L. Lau. 1986. “Turbulence modelling of flood plain flows.” J. Hydraul. Eng. 112 (4): 251–266. https://doi.org/10.1061/(ASCE)0733-9429(1986)112:4(251).
Moharana, S., and K. K. Khatua. 2014. “Prediction of roughness coefficient of a meandering open channel flow using neuro-fuzzy inference system.” Measurement 51 (May): 112–123. https://doi.org/10.1016/j.measurement.2014.01.026.
Moreta, P. J., and J. P. Martin-Vide. 2010. “Apparent friction coefficient in straight compound channels.” J. Hydraul. Res. 48 (2): 169–177. https://doi.org/10.1080/00221681003704137.
Myers, R. C., and E. M. Elsawy. 1975. “Boundary shear in channel with flood plain.” J. Hydraul. Div. 101 (7): 933–946.
Myers, W. R. 1987. “Velocity and discharge in compound channels.” J. Hydraul. Eng. 113 (6): 753–766. https://doi.org/10.1061/(ASCE)0733-9429(1987)113:6(753).
Myers, W. R. C. 1978. “Momentum transfer in a compound channel.” J. Hydraul. Res. 16 (2): 139–150. https://doi.org/10.1080/00221687809499626.
Naik, B., K. K. Khatua, N. Wright, A. Sleigh, and P. Singh. 2018. “Numerical modeling of converging compound channel flow.” J. Hydraul. Eng. 24 (3): 285–297. https://doi.org/10.1080/09715010.2017.1369180.
Parsaie, A., H. Yonesi, and S. Najafian. 2017. “Prediction of flow discharge in compound open channels using adaptive neuro fuzzy inference system method.” Flow Measure. Instrum. 54 (Apr): 288–297. https://doi.org/10.1016/j.flowmeasinst.2016.08.013.
Pasche, E., and G. Rouvé. 1985. “Overbank flow with vegetatively roughened flood plains.” J. Hydraul. Eng. 111 (9): 1262–1278. https://doi.org/10.1061/(ASCE)0733-9429(1985)111:9(1262).
Pradhan, A., and K. K. Khatua. 2017. “Gene expression programming to predict Manning’s n in meandering flows.” Can. J. Civ. Eng. 45 (4): 304–313. https://doi.org/10.1139/cjce-2016-0569.
Prinos, P., and R. D. Townsend. 1984. “Comparison of methods for predicting discharge in compound open channels.” Adv. Water Resour. 7 (4): 180–187. https://doi.org/10.1016/0309-1708(84)90016-2.
Rajaratnam, N., and R. M. Ahmadi. 1979. “Interaction between main channel and flood-plain flows.” J. Hydraul. Div. 105 (5): 573–588.
Singh, P. K., S. Banerjee, B. Naik, A. Kumar, and K. K. Khatua. 2018a. “Lateral distribution of depth average velocity & boundary shear stress in a gravel bed open channel flow.” ISH J. Hydraul. Eng. 1–15. https://doi.org/10.1080/09715010.2018.1505562.
Singh, P. K., and K. K. Khatua. 2018. “Lateral dissemination of depth-averaged velocity, boundary shear stress and stage-discharge curves for compound channels.” ISH J. Hydraul. Eng. 1–14. https://doi.org/10.1080/09715010.2018.1549962.
Singh, P. K., K. K. Khatua, and S. Banerjee. 2018b. “Flow resistance in straight gravel bed inbank flow with analytical solution for velocity and boundary shear distribution.” ISH J. Hydraul. Eng. 1–14. https://doi.org/10.1080/09715010.2018.1505561.
Tang, X. 1999. “Derivation of the wave speed-discharge relationship from cross section survey for use in approximate flood routing methods.” Ph.D. dissertation, School of Engineering, Univ. of Birmingham.
Tang, X. 2017a. “An improved method for predicting discharge of homogeneous compound channels based on energy concept.” Flow Meas. Instrum. 57 (Oct): 57–63. https://doi.org/10.1016/j.flowmeasinst.2017.08.005.
Tang, X. 2017b. “Comparison of different methods for predicting zonal discharge of straight heterogeneously roughened compound channels.” In Managing water for sustainable development—Learning from the past for the future, edited by A. B. Ghani, N. W. Chan, and J. Ariffin. Kuala Lumpur, Malaysia: CRC Press.
Tang, X. 2018a. “Evaluating methods for discharge prediction of straight asymmetric compound channels.” J. Geol. Res. Eng. 6 (5): 217–227. https://doi.org/10.17265/2328-2193.
Tang, X. 2018b. A new approach for predicting discharge in straight, symmetric homogeneous compound channels. In Proc., 12th Int. Symp. on Ecohydraulics, 19–24. Madrid, Spain: International Association for Hydro-Environment Engineering and Research.
Tang, X. 2019. “A new apparent shear stress-based approach for predicting discharge in uniformly roughened compound channels.” Flow Meas. Instrum. 65 (Mar): 280–287. https://doi.org/10.1016/j.flowmeasinst.2019.01.012.
Tang, X., and D. W. Knight. 2008a. “A general model of lateral depth-averaged velocity distributions for open channel flows.” Adv. Water Res. 31 (5): 846–857. https://doi.org/10.1016/j.advwatres.2008.02.002.
Tang, X., and D. W. Knight. 2008b. “Lateral depth-averaged velocity distribution and bed shear in rectangular compound channels.” J. Hydraul. Eng. 134 (9): 1337–1342. https://doi.org/10.1061/(ASCE)0733-9429(2008)134:9(1337).
Tang, X., and D. W. Knight. 2009. “Analytical models for velocity distributions in open channel flows.” J. Hydraul. Res. 47 (4): 418–428. https://doi.org/10.1080/00221686.2009.9522017.
Tominaga, A., and I. Nezu. 1991. “Turbulent structure in compound open channel flows.” J. Hydraul. Eng. 117 (1): 21–41. https://doi.org/10.1061/(ASCE)0733-9429(1991)117:1(21).
Tominaga, A., I. Nezu, and K. Ezaki. 1989. “Experimental study on secondary currents in compound open channel flows.” In Proc., 23rd Congress IAHR, 15–22. Beijing: International Association for Hydro-Environment Engineering and Research.
Wormleaton, P. R., J. Allen, and P. Hadjipanos. 1982. “Discharge assessment in compound channel flow.” J. Hydraul. Div. 108 (9): 975–994.
Wormleaton, P. R., and D. J. Merrett. 1990. “An improved method of the calculation for steady uniform flow in prismatic main channel/flood plain sections.” J. Hydraul. Res. 28 (2): 157–174. https://doi.org/10.1080/00221689009499084.
Zheleznyakov, G. V. 1971. “Interaction of channel and flood plain streams”. In Proc., 14th IAHR Congress, 144–148. Paris: International Association for Hydraulic Research.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Sep 29, 2018
Accepted: Jul 12, 2019
Published online: Sep 27, 2019
Published in print: Dec 1, 2019
Discussion open until: Feb 27, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.