Abstract
In this paper, a generalized hierarchical multiscale approach for modeling coupled groundwater and surface water systems is demonstrated. Groundwater–lake interactions are simulated by coupling the groundwater equations with the lake’s continuity equation and by providing a two-way iterative feedback between models at multiple scales using specified head/flux boundary conditions. A hierarchical parameter estimation method that allows data and parameters at different scales to communicate between each other is also developed. These methods are applied to simulate a lake augmentation system for the Sister Lakes in southwest Michigan, which involves pumping a large amount of water from an irrigation well into the lakes. This problem requires resolution of time scales ranging from site-scale (hours) to local-scale (months) to watershed-scale (years) and spatial scales ranging from a few meters to a few kilometers. A hierarchical modeling framework consisting of five interlinked models was created, and model calibration was performed using drawdown data from a 72-h pumping test. The calibrated model was then used to simulate the entire lake augmentation system. The results indicate that the proposed modeling and parameter estimation approach can help improve the ability to model real-world complexities.
Get full access to this article
View all available purchase options and get full access to this article.
References
Afshari, S., Mandle, R., and Li, S. G. (2008). “Hierarchical patch dynamics modeling of near-well dynamics in complex regional groundwater systems.” J. Hydrol. Eng., 894–904.
Bhallamudi, S. M., Panday, S., and Huyakorn, P. S. (2003). “Sub-timing in fluid flow and transport simulations.” Adv. Water Resour., 26(5), 477–489.
Bredehoeft, J. D., Papadopulos, S. S., and Cooper, H. H. (1982). “Groundwater: The water-budget myth.” Scientific basis of water-resource management, studies in geophysics, National Academy Press, Washington, DC, 51–57.
de Tullio, M. D., De Palma, P., Iaccarino, G., Pascazio, G., and Napolitano, M. (2007). “An immersed boundary method for compressible flows using local grid refinement.” J. Comput. Phys., 225(2), 2098–2117.
Efendiev, Y., Durlofsky, L. J., and Lee, S. H. (2000). “Modeling of subgrid effects in coarse-scale simulations of transport in heterogeneous porous media.” Water Resour. Res., 36(8), 2031–2041.
Fung, L. S., Hiebert, A. D., and Nghiem, L. X. (1992). “Reservoir simulation with a control-volume finite-element method.” SPE Reservoir Eng., 7(3), 349–357.
Graham, M. F., and Smart, G. T. (1980). “Reservoir simulator employing a fine-grid model nested in a coarse-grid model.” Society of Petroleum Engineers (SPE) Annual Technical Conf. and Exhibition, SPE, Richardson, TX.
Heinemann, Z. E., Gerken, G., and von Hantelmann, G. (1983). “Using local grid refinement in a multiple-application reservoir simulator.” Proc., Society of Petroleum Engineers (SPE) Reservoir Simulation Symp., SPE, Richardson, TX.
Hill, M. C., and Tiedeman, R. C. (2007). Effective groundwater model calibration—With analysis of data, sensitivities, predictions, and uncertainty, Wiley, Hoboken, NJ.
Keating, E. H., Vesselinov, V. V., Kwicklis, E., and Zhiming, L. (2003). “Coupling basin- and site-scale inverse models of the Espanola aquifer.” Ground Water, 41(2), 200–211.
Khu, S.-T., Madsen, H., and di Pierro, F. (2008). “Incorporating multiple observations for distributed hydrologic model calibration: An approach using a multi-objective evolutionary algorithm and clustering.” Adv. Water Resour., 31(10), 1387–1398.
Leake, S., Lawson, P. W., Lilly, M. R., and Claar, D. V. (1998). “Assignment of boundary conditions in embedded ground water flow models.” Ground Water, 36(4), 621–625.
Li, S. G., and Liu, Q. (2006a). “A real-time, interactive steering environment for integrated ground water modeling.” J. Groundwater, 44(5), 758–763.
Li, S. G., and Liu, Q. (2006b). “Interactive ground water (IGW).” Environ. Modell. Software, 21(3), 417–418.
Li, S. G., and Liu, Q. (2008). “A new paradigm for groundwater modeling.” Quantitative information fusion for hydrological sciences, Springer, Berlin, 19–41.
Li, S. G., Liu, Q., and Afshari, S. (2006). “An object-oriented hierarchical patch dynamics paradigm (HPDP) for groundwater modeling.” Environ. Modell. Software, 21(5), 744–749.
Madsen, H. (2008). “Automatic calibration of a conceptual rainfall-runoff model using multiple objectives.” J Hydrol., 235(3–4), 276–288.
McDonald, M. G., and Harbaugh, A. W. (1988). “A modular three-dimensional finite-difference ground-water flow model.” Chapter A1, Techniques of water-resources investigations, USGS, Reston, VA.
MDEQ (Michigan Dept. of Environmental Quality). (2006). “Wellogic system.” 〈http://www.deq.state.mi.us/wellogic/mail.html〉 (Mar. 10, 2015).
Medina, A., and Carrera, J. (1996). “Coupled estimation of flow and solute transport parameters.” Water Resour. Res., 32(10), 3063–3076.
Mehl, S., and Hill, M. C. (2002). “Development and evaluation of a local grid refinement method for block-centered finite-difference groundwater models using shared nodes.” Adv. Water Resour., 25(5), 497–511.
Mrosovsky, I., and Ridings, R. L. (1974). “Two-dimensional radial treatment of wells within a three-dimensional reservoir model.” Soc. Pet. Eng. J., 14(2), 127–138.
Park, Y.-J., Sudicky, E. A., Panday, S., and Matanga, G. (2009). “Implicit sub-time stepping for solving nonlinear equations of flow in an integrated surface-subsurface system.” Vadose Zone J., 8(4), 825–836.
Park, Y.-J., Sudicky, E. A., Panday, S., Sykes, J. F., and Guvanasen, V. (2008). “Application of implicit sub-time stepping to simulate flow and transport in fractured porous media.” Adv. Water Resour., 31(7), 995–1003.
Poeter, E., and Hill, M. C. (1999). “UCODE, a computer code for universal inverse modeling.” Comput. Geosci., 25(4), 457–462.
Townley, L. R., and Wilson, J. L. (1980). “Description of and user’s manual for a finite element aquifer flow model AQUIFEM-1.”, Ralph M. Parsons Laboratory for Water Resources and Hydrodynamics, Massachusetts Institute of Technology, Cambridge, MA.
Ward, D. S., Buss, D. R., Mercer, J. W., and Hughes, S. S. (1987). “Evaluation of a groundwater corrective action at the Chem-Dyne hazardous-waste site using a telescopic mesh refinement modeling approach.” Water Resour. Res., 23(4), 603–617.
Yeh, T.-C. J., et al. (2008). “A view toward the future of subsurface characterization: CAT scanning groundwater basins.” Water Resour. Res., 44(3), W03301.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Sep 22, 2014
Accepted: Feb 25, 2015
Published online: Apr 3, 2015
Discussion open until: Sep 3, 2015
Published in print: Nov 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.