Rain Microstructure and Erosivity Relationships under Pressurized Rainfall Simulator
Publication: Journal of Hydrologic Engineering
Volume 20, Issue 6
Abstract
Rain simulators have been used extensively in order to assess the interaction between rainfall and land surface. The main objective of a rain simulator is to produce rain with characteristics similar to natural rainfall at a certain geographical location. This paper investigates the microstructural characteristics of rainfall generated by a pressurized simulation system and their impact on rainfall erosivity in comparison with natural rainfall for different environments. The simulated raindrop characteristics have been measured using two piezoelectric transducers to investigate the rainfall kinetic energy and drop size distribution. The pressurized simulation system was able to generate rain with different intensities and the relationship between the pressure and rainfall intensity was statistically significant. On the other hand, the time-based rainfall kinetic energy was increasing linearly with rainfall intensity. The pressurized rain simulator showed low volume–based kinetic energy () and the trend was different from that observed under natural rainfall. The average percentage of small raindrops () was more than 98%, and the average median drop size was 1.4 mm.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abd Elbasit, M. A. M., Yasuda, H., and Salmi, A. (2011). “Application of piezoelectric transducers in simulated rainfall erosivity assessment.” Hydrol. Sci. J., 56(1), 187–194.
Abd Elbasit, M. A. M., Yasuda, H., Salmi, A., and Anyoji, H. (2010). “Characterization of rainfall generated by dripper-type rainfall simulator using piezoelectric transducers and its impact on splash soil erosion.” Earth Surf. Process. Landforms, 35(4), 466–475.
Al-Durrah, M. M, and Bradford, J. M. (1982). “The mechanism of raindrop splash on soil surfaces.” Soil Sci Soc Am J., 46(5), 1086–1090.
Amu-Mensah, F. K., Yamamoto, T., and Inoue, M. (2013). “Investigating rainwater harvesting on highly permeable soil-baseline conditions.” Int. J. Water Resou. Enviro. Eng., 5(7), 426–433.
Armstrong, A., and Quinton, J. N. (2009). “Pumped rainfall simulators: the impact of rain pulses on sediment concentration and size.” Earth Surf. Process. Landforms, 34(9), 1310–1314.
Bowyer-Bower, T. A. S., and Burt, T. P. (1989). “Rainfall simulators for investigating soil response to rainfall.” Soil Technol., 2(1), 1–16.
Bradford, J. M., Remley, P. A., Ferris, J. E., and Santini, J. B. (1986). “Effect of soil surface sealing on splash from a single waterdrop.” Soil Sci. Soc. Am. J., 50(6), 1547–1552.
Carter, C. E., Greer, J. D, Braud, H. J., and Floyd, J. M. (1974). “Raindrop characteristics in south central United States.” Trans. ASAE, 17(6), 1033–1037.
Christiansen, J. E., (1942). Irrigation by sprinkling, Univ. of California, Berkeley, CA.
De Lima, J. L. M. P., Torfs, P. J. J. F., and Singh, V. P. (2002). “A mathematical model for evaluating the effect of wind on downward-spraying rainfall simulators.” CATENA, 46(4), 221–241.
Dunkerley, D. (2008). “Rain event properties in nature and in rainfall simulation experiments: A comparative review with recommendations for increasingly systematic study and reporting.” Hydrol. Process., 22(22), 4415–4435.
Dunkerley, D. (2012). “Effects of rainfall intensity fluctuations on infiltration and runoff: Rainfall simulation on dryland soils, Fowlers Gap, Australia.” Hydrol. Process., 26(15), 2211–2224.
Epema, G. F., and Riezebos, H. T. (1983). “Fall velocity of waterdrops at different heights as a factor influencing erosivity of simulated rain.” Rainfall simulation runoff and soil erosion, J. DePloey, ed., 1–17.
Esteves, M., Planchon, O., Lapetite, J. M., Silvera, N., and Cadet, P. (2000). “The ‘EMIRE’ large rainfall simulator: Design and field testing.” Earth Surf. Process. Landforms, 25(7), 681–690.
Foster, I. D., Fullen, M. A, Brandsma, R. T., and Chapman, A. S. (2000). “Drip-screen rainfall simulators for hydro- and pedo-geomorphological research: The Coventry experience.” Earth Surf. Process. Landforms, 25(7), 691–707.
Grismer, M. E. (2012). “Rainfall simulation-designs, performance and erosion measurement variability.” California Agric., 66(3), 102–107.
Hall, M. J. (1970a). “A critique of methods of simulating rainfall.” Water Resou. Res., 6(4), 1104–1114.
Hall, M. J. (1970b). “Use of stain method in determining the drop-size distributions of coarse liquid sprays.” Trans. ASAE, 13(1), 0033–0037.
Hudson, NW. (1963). “Raindrop size distribution in high intensity storms.” Rhod. J. Agr. Res., 1(1), 6–11.
Iserloh, T., et al. (2013). “European small portable rainfall simulators: A comparison of rainfall characteristics.” CATENA, 110, 100–112.
Jayawardena, A. W., and Rezaur, R. B. (2000). “Drop size distribution and kinetic energy load of rainstorms in Hong Kong.” Hydrol. Process., 14(6), 1069–1082.
Kinnell, P. (1981). “Rainfall intensity-kinetic energy relationships for soil loss prediction.” Soil. Sci. Soc. Am. Pro., 45(1), 153–155.
Kinnell, P. I. A. (2005). “Sediment transport by medium to large drops impacting flows at subterminal velocity.” Soil Sci. Soc. Am. J., 69(3), 902–905.
Laws, J. O., and Parsons, D. A. (1943). “Relation of raindrop size to intensity.” Trans. Am. Geophys. Union, 24(2), 452–460.
Marshall, J. S., and Palmer, W. M. K. (1948). “The distribution of raindrops with size.” J. Meteor., 5(4), 165–166.
Mouzai, L., and Bouhadef, M. (2003). “Water drop erosivity: Effect on soil splash.” J. Hydraul. Res., 41(1), 61–68.
Pall, R., Dickinson, W. T., Beals, D., and McGIRR, R. (1983). “Development and calibration of a rainfall simulator.” Can. Agric. Eng., 25(2), 181–187.
Pohjola, H., Konkola, L., Hoikkanen, M., and Schultz, D. M. (2008). “Adjusting radar-derived QPE with measured drop-size distribution at the surface.” 5th European Conf. on Radar in Meteorology and Hydrology, Finnish Meteorological Institute, Helsinki, Finland.
Salles, C., and Poesen, J. (2000). “Rain properties controlling soil splash detachment.” Hydrol. Process., 14(2), 271–282.
Salmi, A., and Elomaa, L. (2007). “Measurement of the terminal velocity and shape of falling raindrops at Vaisala rain laboratory.” Eighth European Conf. on Application of Meteorology (ECAM), European Meteorological Society, Berlin.
Salmi, A., and Ikonen, J. (2005). “Piezoelectric precipitation sensor from Vaisala.” World Meteorology Organization Technical Conf. on Meteorological and Environmental Instruments and Methods of Observation (TECO 2005), World Meteorological Organization, Rome.
Sanchez-Moreno, F., Mannaerts, C. M., Jetten, V., and Löffler-Mang, M. (2012). “Rainfall kinetic energy–intensity and rainfall momentum–intensity relationships for Cape Verde.” J. Hydrol., 454–455, 131–140.
Sempere Torres, D., Porrà, J. M., and Creutin, J. D. (1994). “A general formulation for raindrop size distribution.” J. Appl. Meteorol., 33(12), 1494–1502.
Van Dijk, A. I. J. M., Bruijnzeel, L. A., and Rosewell, C. J. (2002). “Rainfall intensity-kinetic energy relationship: A critical literature appraisal.” J. Hydrol., 261(1–4), 1–23.
Williams, J. D., Wilkins, D. E., McCool, D. K., Baarstad, L. L., Klepper, B. L., and Papendick, R. I. (1998). “A new rainfall simulator for use in low-energy rainfall areas.” Appl. Eng. Agric., 14(3), 243–247.
Wischmeier, W. H., and Smith, D. D. (1978). “Predicting rainfall erosion losses.”, Science and Education Administration, U.S. Dept. of Agriculture, Washington, DC.
Yu, B., Ciesiolka, C. A., and Langford, P. (2003). “Calibration of an oscillating nozzle-type rainfall simulator.” Earth Surf. Process. Landforms, 28(13), 1483–1490.
Zanchi, C., and Torri, D. (1980). “Evaluation of rainfall energy in central Italy.” Assessment of erosion, M. D. Boodt and D. Gabriels, eds., Wiley, Toronto, 133–142.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Jun 15, 2014
Accepted: Nov 3, 2014
Published online: Jan 5, 2015
Published in print: Jun 1, 2015
Discussion open until: Jun 5, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.