Experimental Study on Migration Behavior of Sandy Silt under Cyclic Load
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 148, Issue 5
Abstract
This paper presents experimental investigation into the effects of particle size distribution of subgrade soil on mud pumping. The results show that subgrade soils with higher fine contents do not necessarily lead to more serious mud pumping. A soil with a higher silt content tends to cause the formation of a less permeable interlayer at the bottom of the ballast, which effectively reduces the particle migration magnitude. Increasing the median particle size () or reducing the coefficient of uniformity () of the studied sandy silt promotes the migration distance of particles. While mud pumping is essentially an internal erosion problem caused by cyclic loads, existing filter theories do not directly apply to mud pumping. The findings from this study can help selecting proper rail embankment fills to reduce mud pumping.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Data generated during the study is available from the corresponding author upon request.
Acknowledgments
This research was financially supported by the National Science Fund for Excellent Young Scholars of China (Grant No. 51722812), the International (Regional) Cooperation and Exchange (ICE) Projects of the National Natural Science Foundation of China (Grant No. 2017YFE0119500), and Central South University autonomous exploration project (Grant No. 2019zzts293).
References
Alobaidi, I., and D. Hoare. 1994. “Factors affecting the pumping of fines at the subgrade subbase interface of highway pavements: A laboratory study.” Geosynth. Int. 1 (2): 221–259. https://doi.org/10.1680/gein.1.0010.
ASTM. 2012. Standard test methods for laboratory compaction characteristics of soil using standard effort ( ()). ASTM D698. West Conshohocken, PA: ASTM.
ASTM. 2017. Standard test methods for liquid limit, plastic limit, and plasticity index of soil. ASTM D4318. West Conshohocken, PA: ASTM.
Aw, E. S. 2007. “Low cost monitoring system to diagnose problematic rail bed: Case study at mud pumping site.” Ph.D. dissertation, Dept. of Civil and Environmental Engineering, Massachusetts Institute of Technology.
Chung Ip, M., A. Haque, and A. Bouazza. 2012. “Influence of cyclic stress pulse shapes on filtration behavior of railway subballast.” J. Geotech. Geoenviron. Eng. 138 (2): 230–235. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000557.
Darcy, H. 1856. Les fontaines publiques de la vile de Dijon. Paris: Dalmont.
Duong, T. V., Y.-J. Cui, A. M. Tang, J.-C. Dupla, J. Canou, N. Calon, and A. Robinet. 2014. “Investigating the mud pumping and interlayer creation phenomena in railway sub-structure.” Eng. Geol. 171 (3): 45–58. https://doi.org/10.1016/j.enggeo.2013.12.016.
Duong, T. V., A. M. Tang, Y.-J. Cui, V. N. Trinh, J.-C. Dupla, N. Calon, J. Canou, and A. Robinet. 2013. “Effects of fines and water contents on the mechanical behavior of interlayer soil in ancient railway sub-structure.” Soils Found. 53 (6): 868–878. https://doi.org/10.1016/j.sandf.2013.10.006.
Foster, M., and R. Fell. 2001. “Assessing embankment dam filters that do not satisfy design criteria.” J. Geotech. Geoenviron. Eng. 127 (5): 398–407. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:5(398).
Hudson, A., G. Watson, L. Le Pen, and W. Powrie. 2016. “Remediation of mud pumping on a ballasted railway track.” Procedia Eng. 143 (Jan): 1043–1050. https://doi.org/10.1016/j.proeng.2016.06.103.
Indraratna, B., W. Korkitsuntornsan, and T. T. Nguyen. 2020. “Influence of Kaolin content on the cyclic loading response of railway subgrade.” Transp. Geotech. 22 (8): 100319. https://doi.org/10.1016/j.trgeo.2020.100319.
Indraratna, B., A. K. Raut, and H. Khabbaz. 2007. “Constriction-based retention criterion for granular filter design.” J. Geotech. Geoenviron. Eng. 133 (3): 266–276. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:3(266).
Indraratna, B., W. Salim, and C. Rujikiatkamjorn. 2011. Advanced rail geotechnology—Ballasted track. London: Taylor & Francis.
Israr, J., and B. Indraratna. 2017. “Internal stability of granular filters under static and cyclic loading.” J. Geotech. Geoenviron. Eng. 143 (6): 04017012. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001661.
Kermani, B., M. Xiao, and S. M. Stoffels. 2019. “Analytical study on quantifying the magnitude and rate of subgrade fines migration into subbase under flexible pavement.” Transp. Geotech. 18 (10): 46–56. https://doi.org/10.1016/j.trgeo.2018.11.003.
Lazorenko, G., A. Kasprzhitskii, Z. Khakiev, and V. Yavna. 2019. “Dynamic behavior and stability of soil foundation in heavy haul railway tracks: A review.” Constr. Build. Mater. 205 (Apr): 111–136. https://doi.org/10.1016/j.conbuildmat.2019.01.184.
Machii, K. 1978. “Mud pumping on tracks: Present state and countermeasures.” Jpn. Railway Eng. 17 (4): 20–21.
Nguyen, T. T., B. Indraratna, R. Kelly, N. M. Phan, and F. Haryono. 2019. “Mud pumping under railtracks: Mechanisms, assessments and solutions.” Aust. Geomech. J. 54 (4): 59–80. https://doi.org/10.1016/0266-1144(86)90004-X.
Skempton, A. W., and J. M. Brogan. 1994. “Experiments on piping in sandy gravels.” Géotechnique 62 (10): 933–942. https://doi.org/10.1680/geot.1994.44.3.449.
Sun, Q., B. Indraratna, and N. T. Ngo. 2019. “Effect of increase in load and frequency on the resilience of railway ballast.” Géotechnique 69 (9): 833–840. https://doi.org/10.1680/jgeot.17.P.302.
Trani, L. D. O., and B. Indraratna. 2010. “Assessment of subballast filtration under cyclic loading.” J. Geotech. Geoenviron. Eng. 136 (11): 1519–1528. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000384.
Wang, Y., L. Kong, and Y. Wang. 2014. “Mechanism and control of subgrade mud pumping under the cyclic load of train.” In Proc., 2014 Int. Conf. on Mechanics and Civil Engineering (ICMCE), 369–374. Paris: Atlantis Press.
Zhang, S., F. Gao, X. He, Q. Chen, and D. Sheng. 2021. “Experimental study of particle migration under cyclic loading: Effects of load frequency and load magnitude.” Acta Geotech. 16 (2): 367–380. https://doi.org/10.1007/s11440-020-01137-x.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Jan 27, 2021
Accepted: Jan 25, 2022
Published online: Feb 28, 2022
Published in print: May 1, 2022
Discussion open until: Jul 28, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.