Effect of Keying-Induced Soil Remolding on the Ultimate Pull-Out Capacity and Embedment Loss of Strip Anchors in Clay
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 147, Issue 10
Abstract
In this paper, the keying of strip anchors in clay has been studied by employing a large deformation finite-element methodology coupled with a soil constitutive model that takes strain rate and soil remolding into considerations. The influences of soil strength degradation during keying on the loss of embedment and undrained pull-out resistance of anchors have been investigated by varying several factors, such as soil sensitivity, initial embedment depth, loading eccentricity, and shear strength heterogeneity. The methodology is validated with results from experimental and theoretical studies available in the literature. A generalized approach is developed to assess the maximum embedment loss and ultimate pull-out capacity. A combined dimensionless parameter as a function of the initial anchor depth and normalized equivalent soil strength is introduced for the prediction of maximum embedment loss. Ultimate pull-out factors normalized by an equivalent shear strength of soil are presented as a function of the initial embedment for different soil-strength heterogeneity and anchor eccentricity. Simplified expressions are provided for adoption in the routine design practice.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data generated during this research and the Abaqus files are available from the corresponding author by request.
Acknowledgments
The authors would like to acknowledge the support provided by the Science and Engineering Research Board (SERB), Department of Science and Technology (DST), Government of India (Grant No. YSS/2014/000628/ES) for carrying out the research work.
References
Biscontin, G., and J. M. Pestana. 2001. “Influence of peripheral velocity on vane shear strength of an artificial clay.” Geotech. Test. J. 24 (4): 423–429. https://doi.org/10.1520/GTJ11140J.
Cassidy, M. J., C. Gaudin, M. F. Randolph, P. C. Wong, D. Wang, and Y. Tian. 2012. “A plasticity model to assess the keying of plate anchors.” Géotechnique 62 (9): 825–836. https://doi.org/10.1680/geot.12.OG.009.
Chatterjee, S. 2012. “Numerical modelling of pipe-soil interactions.” Ph.D. thesis, Centre for Offshore Foundation Systems, Univ. of Western Australia.
Chatterjee, S., M. F. Randolph, and D. J. White. 2012a. “The effects of penetration rate and strain softening on the vertical penetration resistance of seabed pipelines.” Géotechnique 62 (7): 573–582. https://doi.org/10.1680/geot.10.P.075.
Chatterjee, S., D. J. White, and M. F. Randolph. 2012b. “Numerical simulations of pipe-soil interaction during large lateral movements on clay.” Géotechnique 62 (8): 693–705. https://doi.org/10.1680/geot.10.P.107.
Chen, Z., K. K. Tho, C. F. Leung, and Y. K. Chow. 2015. “Large deformation numerical analysis of plate anchor keying process.” In Proc., Int. Symp. on Frontiers in Offshore Geotechnics III, 845–850. London: Taylor and Francis.
Dassault Systèmes. 2013. Abaqus user manual, version 6.13. Providence, RI: Simulia.
Det Norske Veritas. 2017. Design and installation of plate anchors in clay. Hovik, Norway: DNV AS.
Dove, P., H. Treu, and B. Wilde. 1998. “Suction embedded plate anchor (SEPLA): A new anchoring solution for ultra-deepwater mooring.” In Proc., Deep Offshore Tech. Conf. London: Deep Offshore Technology.
Einav, I., and M. F. Randolph. 2005. “Combining upper bound and strain path methods for evaluating penetration resistance.” Int. J. Numer. Methods Eng. 63 (14): 1991–2016. https://doi.org/10.1002/nme.1350.
Gaudin, C., C. D. O’Loughlin, M. F. Randolph, and A. C. Lowmass. 2006. “Influence of the installation process on the performance of suction embedded plate anchors.” Géotechnique 56 (6): 381–391. https://doi.org/10.1680/geot.2006.56.6.381.
Ghorai, B., and S. Chatterjee. 2017. “Influences of strain rate and soil remoulding on initial break-out resistance of deepwater on-bottom pipelines.” Comput. Geotech. 91 (Nov): 82–92. https://doi.org/10.1016/j.compgeo.2017.07.006.
Ghorai, B., and S. Chatterjee. 2020. “Estimation of installation resistance and subsequent short-term capacities of offshore skirted foundations in clay.” Int. J. Geomech. 20 (8): 04020133. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001759.
Han, C., D. Wang, C. Gaudin, C. D. O’Loughlin, and M. J. Cassidy. 2016. “Behaviour of vertically loaded plate anchors under sustained uplift.” Géotechnique 66 (8): 681–693. https://doi.org/10.1680/jgeot.15.P.232.
Hossain, M. S., and M. F. Randolph. 2009. “Effect of strain rate and strain softening on the penetration resistance of spudcan foundations on clay.” Int. J. Geomech. 9 (3): 122–132. https://doi.org/10.1061/(ASCE)1532-3641(2009)9:3(122).
Hu, Y., and M. F. Randolph. 1998a. “A practical numerical approach for large deformation problems in soil.” Int. J. Numer. Anal. Methods Geomech. 22 (5): 327–350. https://doi.org/10.1002/(SICI)1096-9853(199805)22:5%3C327::AID-NAG920%3E3.0.CO;2-X.
Hu, Y., and M. F. Randolph. 1998b. “H-adaptive FE analysis of elasto-plastic non-homogeneous soil with large deformation.” Comput. Geotech. 23 (1–2): 61–83. https://doi.org/10.1016/S0266-352X(98)00012-3.
Iskander, M. G., J. Lai, C. J. Oswald, and R. J. Mannheimer. 1994. “Development of a transparent material to model the geotechnical properties of soils.” Geotech. Test. J. 17 (4): 425–433. https://doi.org/10.1520/GTJ10303J.
Iskander, M. G., J. Liu, and S. Sadek. 2002. “Transparent amorphous silica to model clay.” J. Geotech. Geoenviron. Eng. 128 (3): 262–273. https://doi.org/10.1061/(ASCE)1090-0241(2002)128:3(262).
Jesmani, M., M. Kamalzare, and M. Nazari. 2013. “Numerical study of behavior of anchor plates in clayey soils.” Int. J. Geomech. 13 (5): 502–513. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000236.
Maitra, S., D. White, S. Chatterjee, and D. Choudhury. 2019. “Numerical modelling of seepage and tension beneath plate anchors.” Comput. Geotech. 108 (Apr): 131–142. https://doi.org/10.1016/j.compgeo.2018.12.022.
Merifield, R. S., A. V. Lyamin, and S. W. Sloan. 2005. “Stability of inclined strip anchors in purely cohesive soil.” J. Geotech. Geoenviron. Eng. 131 (6): 792–799. https://doi.org/10.1061/(ASCE)1090-0241(2005)131:6(792).
Merifield, R. S., A. V. Lyamin, S. W. Sloan, and H. S. Yu. 2003. “Three-dimensional lower bound solutions for stability of plate anchors in clay.” J. Geotech. Geoenviron. Eng. 129 (3): 243–253. https://doi.org/10.1061/(ASCE)1090-0241(2003)129:3(243).
Merifield, R. S., S. W. Sloan, and H. S. Yu. 2001. “Stability of plate anchors in undrained clay.” Géotechnique 51 (2): 141–153. https://doi.org/10.1680/geot.2001.51.2.141.
O’Loughlin, C. D., A. Lowmass, C. Gaudin, and M. F. Randolph. 2006. “Physical modelling to assess keying characteristics of plate anchors.” In Proc., 6th Int. Conf. Physical Modelling in Geotechnics, 659–665. Rotterdam, Netherlands: A.A. Balkema.
Randolph, M. F. 2004. “Characterization of soft sediments for offshore applications.” In Vol. 1 of Proc., 2nd Int. Conf. on Site Characterization, 209–231. Rotterdam, Netherlands: Milpress.
Rowe, R. K. 1978. “Soil structure interaction analysis and its application to the prediction of anchor plate behaviour.” Ph.D. thesis, School of Civil Engineering, Univ. of Sydney.
Rowe, R. K., and E. H. Davis. 1982. “The behaviour of anchor plates in clay.” Géotechnique 32 (1): 9–23. https://doi.org/10.1680/geot.1982.32.1.9.
Singh, V., S. Maitra, and S. Chatterjee. 2017. “Generalized design approach for inclined strip anchors in clay.” Int. J. Geomech. 17 (6): 04016148. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000849.
Song, Z., Y. Hu, C. O’Loughlin, and M. F. Randolph. 2009. “Loss in anchor embedment during plate anchor keying in clay.” J. Geotech. Geoenviron. Eng. 135 (10): 1475–1485. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000098.
Song, Z., Y. Hu, and M. F. Randolph. 2008. “Numerical simulation of vertical pullout of plate anchors in clay.” J. Geotech. Geoenviron. Eng. 134 (6): 866–875. https://doi.org/10.1061/(ASCE)1090-0241(2008)134:6(866).
Song, Z., Y. Hu, D. Wang, and C. D. O’Loughlin. 2006. “Pullout capacity and rotational behaviour of square anchors.” In Proc., 6th Int. Conf. Physical Modelling in Geotechnics, 1325–1331. Rotterdam, Netherlands: A.A Balkema.
Tho, K. K., Z. Chen, C. F. Leung, and Y. K. Chow. 2014. “Pullout behaviour of plate anchor in clay with linearly increasing strength.” Can. Geotech. J. 51 (1): 92–102. https://doi.org/10.1139/cgj-2013-0140.
Tian, Y., M. J. Cassidy, C. Gaudin, and M. Peng. 2019. “Improving force resultant model for anchors in clays from large deformation finite element analysis.” Mar. Georesour. Geotechnol. 37 (10): 1227–1235. https://doi.org/10.1080/1064119X.2018.1545813.
Tian, Y., M. J. Cassidy, M. F. Randolph, D. Wang, and C. Gaudin. 2014. “A simple implementation of RITSS and its application in large deformation analysis.” Comput. Geotech. 56 (Mar): 160–167. https://doi.org/10.1016/j.compgeo.2013.12.001.
Tian, Y., C. Gaudin, C. M. F. Randolph, and M. J. Cassidy. 2015a. “Influence of padeye offset on bearing capacity of three-dimensional plate anchors.” Can. Geotech. J. 52 (6): 682–693. https://doi.org/10.1139/cgj-2014-0120.
Tian, Y., M. F. Randolph, and M. J. Cassidy. 2015b. “Analytical solution for ultimate embedment depth and potential holding capacity of plate anchors.” Géotechnique 65 (6): 517–530. https://doi.org/10.1680/geot.14.P.228.
Wang, D., Y. Hu, and M. F. Randolph. 2010a. “Three-dimensional large deformation finite-element analysis of plate anchors in uniform clay.” J. Geotech. Geoenviron. Eng. 136 (2): 355–365. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000210.
Wang, D., Y. Hu, and M. F. Randolph. 2011. “Keying of rectangular plate anchors in normally consolidated clays.” J. Geotech. Geoenviron. Eng. 137 (12): 1244–1253. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000477.
Wang, D., D. J. White, and M. F. Randolph. 2010b. “Large-deformation finite element analysis of pipe penetration and large-amplitude lateral displacement.” Can. Geotech. J. 47 (8): 842–856. https://doi.org/10.1139/T09-147.
Wilde, B., H. Treu, and T. Fulton. 2001. “Field testing of suction embedded plate anchors.” In Proc., 11th Int. Offshore and Polar Engineering Conf., 544–551. Mountain View, CA: International Society of Offshore and Polar Engineers.
Yu, L., J. Liu, X. J. Kong, and Y. Hu. 2011. “Numerical study on plate anchor stability in clay.” Géotechnique 61 (3): 235–246. https://doi.org/10.1680/geot.8.P.071.
Zhou, H., and M. F. Randolph. 2007. “Computational techniques and shear band development for cylindrical and spherical penetrometers in strain-softening clay.” Int. J. Geomech. 7 (4): 287–295. https://doi.org/10.1061/(ASCE)1532-3641(2007)7:4(287).
Zhou, H., and M. F. Randolph. 2009. “Resistance of full-flow penetrometers in rate dependent and strain-softening clay.” Géotechnique 59 (2): 79–86. https://doi.org/10.1680/geot.2007.00164.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Nov 14, 2020
Accepted: Jun 1, 2021
Published online: Aug 12, 2021
Published in print: Oct 1, 2021
Discussion open until: Jan 12, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- L. Cheng, Y.R. Han, Y.Q. Wu, Y.H. Kim, Numerical investigation of pullout capacity for inclined strip plate anchors in sand, Applied Ocean Research, 10.1016/j.apor.2022.103414, 130, (103414), (2023).
- Shubhrajit Maitra, Yinghui Tian, Mark J. Cassidy, Investigation of the installation process of drag-in plate anchors from LDFE modelling, Géotechnique, 10.1680/jgeot.21.00402, (1-13), (2022).