Centrifuge Modeling of Vessel Impact on Bridge Fender Systems
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 147, Issue 5
Abstract
Bridge or berthing structures are susceptible to accidental ship impacts that may pose a hazard to human life, property, and the environment. Therefore, fenders are often constructed around bridge piers for protection. Although efforts have been made to estimate the ship impact load, understanding of the mechanism of ship impacts on bridge fender systems is still inadequate due to insufficient experimental evidence. In this study, a comprehensive centrifuge model test program involving 60 ship impact tests was performed on a pile group to systematically examine the effect of fender systems on a bridge pile foundation subjected to ship impacts. Two types of fenders with different stiffnesses, as well as a benchmark test without fenders, were investigated under different vessel tonnage and impact velocity values. Based on the test results, the characteristics of the impact loads were analyzed. The energy transfer patterns with and without fender systems were compared. The influences of the ship tonnage, impact velocity, ship bow structure, and bridge superstructure mass on the impact load with different fender systems were studied. Finally, empirical equations are established to relate the ship impact load with key influencing factors regarding the fender system, the ship, and the bridge.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code generated or used during the study are available from the corresponding author by request.
Acknowledgments
The work presented in this paper was substantially supported by Eunsung O&C Offshore Marine and Construction (Project No. EUNSUNG19EG01) and the Science and Technology Plan of Shenzhen (Project No. JCYJ20180507183854827).
References
AASHTO. 1994. LRFD bridge design specifications and commentary. Washington, DC: AASHTO.
AASHTO. 2009. Guide specification and commentary for vessel collision design of highway bridges. 2nd ed. Washington, DC: AASHTO.
Bezuijen, A., P. E. L. Schaminee, and D. M. Lee. 2003. “Model tests on ship impact in a revetment performed in a geotechnical centrifuge.” In Proc., Int. Symp. on Foundation Innovations, Observation Design and Practice, 119–128. London: Thomas Telford.
Bolton, M. D., and C. K. Lau. 1988. “Scale effects arising from particle size.” In Proc., Int. Conf. on Geotechnical Centrifuge Modelling, 127–131. London: CRC Press.
BSI (British Standards Institution). 1994. Maritime structures—Part 4: Code of practice for design of fendering and mooring system.. London: BSI.
CED (Civil Engineering Department). 2004. Port works design manual—Part 1: General design considerations for marine works. Hong Kong: CED.
Chu, L. M., and L. M. Zhang. 2011. “Centrifuge modeling of ship impact loads on bridge pile foundations.” J. Geotech. Geoenviron. Eng. 137 (4): 405–420. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000446.
Consolazio, G. R., and D. R. Cowan. 2005. “Numerically efficient dynamic analysis of barge collisions with bridge piers.” J. Struct. Eng. 131 (8): 1256–1266. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:8(1256).
Consolazio, G. R., D. J. Getter, and M. T. Davidson. 2010. A static analysis method for barge-impact design of bridges with consideration of dynamic amplification. Gainesville, FL: Univ. of Florida.
Craig, W. H., and S. K. Sabagh. 1994. “Stress-level effects in model tests on piles.” Can. Geotech. J. 31 (1): 28–41.
Dong, J., F. Chen, M. Zhou, and X. Zhou. 2018. “Numerical analysis of the boundary effect in model tests for single pile under lateral load.” Bull. Eng. Geol. Environ. 77: 1057–1068. https://doi.org/10.1007/s10064-017-1182-5.
Endo, H., and Y. Yamada. 2001. “The performance of buffer bow structures against collision.” J. Soc. Nav. Architects Jpn. 2001 (189): 209–217. https://doi.org/10.2534/jjasnaoe1968.2001.209.
Fan, W., W. Yuan, and B. Chen. 2015. “Steel fender limitations and improvements for bridge protection in ship collisions.” J. Bridge Eng. 20 (12): 06015004. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000785.
Jiang, H., and M. G. Chorzepa. 2016. “Case study: Evaluation of a floating steel fender system for bridge pier protection against vessel collision.” J. Bridge Eng. 21 (11): 05016008. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000947.
Jiang, J. H., Y. L. Jin, L. L. Pan, and W. J. Liang. 2008. “Techniques and methods in ship-bridge collision avoidance research.” J. Shanghai Sci. Res. Inst. Ship. 31 (1): 23–27.
Klinkvort, R. T., and O. Hededal. 2014. “Effect of load eccentricity and stress level on monopile support for offshore wind turbines.” Can. Geotech. J. 51 (9): 966–974.
Kong, L. G., and L. M. Zhang. 2007. “Centrifuge modeling of torsionally loaded pile groups.” J. Geotech. Geoenviron. Eng. 133 (11): 1374–1384. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:11(1374).
Lee, K. 2013. “Effects on the various rubber fenders of a tripod offshore wind turbine substructure collision strength due to boat.” Ocean Eng. 72 (1): 188–194. https://doi.org/10.1016/j.oceaneng.2013.06.014.
Lu, W. J., G. Zhang, and A. X. Wang. 2017. “Bearing behavior of multiple piles for offshore wind driven generator.” Ocean Eng. 129: 538–548. https://doi.org/10.1016/j.oceaneng.2016.10.038.
McVay, M. C., S. J. Wasman, G. R. Consolazio, P. J. Bullock, D. R. Cowan, and H. T. Bollmann. 2009. “Dynamic soil-structure interaction of bridge superstructure subject to vessel impact.” J. Bridge Eng. 14 (1): 7–16. https://doi.org/10.1061/(ASCE)1084-0702(2009)14:1(7).
Patev, R. C., B. C. Barker, and L. V. Koestler. 2003. Prototype barge impact experiments, Allegheny Lock and Dam 2, Pittsburgh, Pennsylvania. Vicksburg, MS: US Army Engineer Research and Development Center.
PIANC (World Association for Waterborne Transport Infrastructure). 2002. Guidelines for the design of fender systems: 2002. Brussels, Belgium: PIANC.
Schofield, A. N. 1980. “Cambridge geotechnical centrifuge operation.” Géotechnique 30 (3): 227–268. https://doi.org/10.1680/geot.1980.30.3.227.
Wang, G., and H. Ohtsubo. 1999. “Impact load of a supply vessel.” In Proc., 9th Int. Offshore and Polar Engineering, 463–471. Cupertino, CA: International Society of Offshore and Polar Engineers.
Wilson, C. M. D., N. Yazdani, and J. Wekezer. 2001. “Static finite-element analysis of bridge fenders for barge impact.” J. Perform. Constr. Facil. 15 (3): 90–95. https://doi.org/10.1061/(ASCE)0887-3828(2001)15:3(90).
Woisin, G. 1976. “The collision tests of the GKSS.” Vol. 70 of Jahrbuch der Schiffbautechnishen Gesellshaft, 465–487. Berlin: Springer.
Yang, P. D. C., and J. B. Caldwell. 1988. “Collision energy absorption of ship’s bow structures.” Int. J. Impact Eng. 7 (2): 181–196. https://doi.org/10.1016/0734-743X(88)90025-5.
Zhang, J. H., L. M. Zhang, and X. B. Lu. 2007. “Centrifuge modeling of suction bucket foundations for platforms under ice-sheet-induced cyclic lateral loadings.” Ocean Eng. 34 (8–9): 1069–1079. https://doi.org/10.1016/j.oceaneng.2006.08.009.
Zheng, W. Y., L. M. Yang, and X. L. Dong. 2012. “Research on impact force of protection device based on the real ship collision experiment.” [In Chinese.] J. Ningbo Univ. 25 (2): 99–102.
Zhu, B., R. P. Chen, Y. M. Chen, and Z. H. Zhang. 2012. “Impact model tests and simplified analysis for flexible pile-supported protective structures withstanding vessel collisions.” J. Waterway, Port, Coastal, Ocean Eng. 138 (2): 86–96. https://doi.org/10.1061/(ASCE)WW.1943-5460.0000110.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Feb 5, 2020
Accepted: Jan 8, 2021
Published online: Feb 19, 2021
Published in print: May 1, 2021
Discussion open until: Jul 19, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.