Variability of Fiber Reinforcement, Peel Strength, and Internal Shear Strength in Needle-Punched GCLs
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 147, Issue 3
Abstract
The objective of this study was to evaluate variability in reinforcement fibers, peel strength, and internal shear strength of needle-punched reinforced geosynthetic clay liners (GCLs). A methodology was proposed to characterize the reinforcement fibers via the number of reinforcement fiber bundles per specimen length, number of monofilament fibers per fiber bundle, and fiber diameter. Variability in reinforcement fibers was evaluated for six GCLs using the proposed methodology. Peel strength and internal direct shear tests were performed on a single GCL to assess the effect of reinforcement fiber variability on shear strength. No pattern was observed in the spatial variability of peel strength along the machine or cross-machine directions. However, peak internal shear strength correlated with manufacturer reported peel strength, and this correlation improved when peel strength was computed from specimens located adjacent and in machine direction relative to direct shear specimens.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
Financial support for this study was provided by the Colloid Environmental Technologies Company (CETCO), Geosynthetic Research Institute (GRI), and Colorado State University (CSU). The opinions, findings, conclusions, or recommendations expressed herein are those of the authors and do not necessarily represent the views of CETCO, GRI, or CSU.
References
ASTM. 2010. Standard test method for measuring mass per unit area of geotextiles. ASTM D5261. West Conshohocken, PA: ASTM.
ASTM. 2014. Standard test method for measuring mass per unit area of geosynthetic clay liners. ASTM D5993. West Conshohocken, PA: ASTM.
ASTM. 2015a. Standard terminology for geosynthetics. ASTM D4439-15a. West Conshohocken, PA: ASTM.
ASTM. 2015b. Standard test method for determining average bonding peel strength between top and bottom layers of needle-punched geosynthetic clay liners. ASTM D6496/6496M. West Conshohocken, PA: ASTM.
ASTM. 2016. Standard test method for determining the internal and interface shear strength of geosynthetic clay liner by the direct shear method. ASTM D6243/D6243M-16. West Conshohocken, PA: ASTM.
Athanassopoulos, C., and Z. Yuan. 2011. “Correlation between needle punch-reinforced geosynthetic clay liner peel strength and internal shear strength.” In Geo-Frontiers 2011: Advances in Geotechnical Engineering, edited by J. Han and D. E. Alzamora, 1922–1930. Reston, VA: ASCE. https://doi.org/10.1061/41165(397)196.
Bacas, B. M., E. Blanco-Fernandez, and J. Cañizal. 2013. “Comparison of the adhesion and shear tensile strength of needle-punched GCLs.” Geotext. Geomembr. 41 (1): 17–25. https://doi.org/10.1016/j.geotexmem.2013.08.007.
Bacas, B. M., J. Cañizal, and H. Konietzky. 2015. “Shear strength behavior of geotextile/geomembrane interfaces.” J. Rock Mech. Geotech. Eng. 7 (6): 638–645. https://doi.org/10.1016/j.jrmge.2015.08.001.
Bareither, C. A., M. Soleimanian, and S. Ghazizadeh. 2018. “Direct shear testing of GCLs at elevated temperature and in a non-standard solution.” Geosynthetics Int. 25 (3): 350–368. https://doi.org/10.1680/jgein.18.00014.
Dixon, N., D. R. V. Jones, and G. J. Fowmes. 2006. “Interface shear strength variability and its use in reliability-based landfill stability analysis.” Geosynthetics Int. 13 (1): 1–14. https://doi.org/10.1680/gein.2006.13.1.1.
Eid, H. T. 2011. “Shear strength of geosynthetic composite systems for design of landfill liner and cover slopes.” Geotext. Geomembr. 29 (3): 335–344. https://doi.org/10.1016/j.geotexmem.2010.11.005.
Fox, P. J., M. G. Rowland, and J. R. Scheithe. 1998. “Internal shear strength of three geosynthetic clay liners.” J. Geotech. Geoenviron. Eng. 124 (10): 933–944. https://doi.org/10.1061/(ASCE)1090-0241(1998)124:10(933).
Fox, P. J., and T. D. Stark. 2015. “State-of-the-art report: GCL shear strength and its measurement–ten-year update.” Geosynthetics Int. 22 (1): 3–47. https://doi.org/10.1680/gein.14.00030.
Ghazizadeh, S., and C. A. Bareither. 2018a. “Stress-controlled direct shear testing of geosynthetic clay liners I: Apparatus development.” Geotext. Geomembr. 46 (5): 656–666. https://doi.org/10.1016/j.geotexmem.2018.06.003.
Ghazizadeh, S., and C. A. Bareither. 2018b. “Stress-controlled direct shear testing of geosynthetic clay liners II: Assessment of shear behavior.” Geotext. Geomembr. 46 (5): 667–677. https://doi.org/10.1016/j.geotexmem.2018.06.004.
Ghazizadeh, S., and C. A. Bareither. 2019. “Temperature effects on the peak and large-displacement shear strength of needle-punched reinforced GCLs.” In Geosynthetics 2019, 250–259. Roseville, MN: Industrial Fabrics Association International.
Ghazizadeh, S., and C. A. Bareither. 2020. “Temperature effects on internal shear behavior in reinforced GCLs.” J. Geotech. Geoenviron. Eng. 146 (1): 04019124. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002193.
Gilbert, R. B., F. Fernandez, and D. W. Horsfield. 1996. “Shear strength of reinforced geosynthetic clay liner.” J. Geotech. Eng. 122 (4): 259–266. https://doi.org/10.1061/(ASCE)0733-9410(1996)122:4(259).
Gilbert, R. B., H. B. Scranton, and D. E. Daniel. 1997. “Shear strength testing for geosynthetic clay liners.” In Testing and acceptance criteria for geosynthetic clay liners, edited by L. Well, 121–135. West Conshohocken, PA: ASTM. https://doi.org/10.1520/STP11798S.
Heerten, G., F. Saathoff, C. Scheu, and K. P. von Maubeuge. 1995. “Testing, interpreting and designing the long-term shear strength of geosynthetic clay liners.” In Geosynthetics ’95, 867–877. St. Paul, MN: Industrial Fabrics Association International.
Koerner, R. M., T. Y. Soong, and A. Gontar. 1998. “Selected aspects of GCL shear strength testing.” In Geo-Bento ‘98, 97–110. Paris: Bureau de Recherches Géologiques et Minières Formation.
Lupo, J. F. 2010. “Liner system design for heap leach pads.” Geotext. Geomembr. 28 (2): 163–173. https://doi.org/10.1016/j.geotexmem.2009.10.006.
McCartney, J. S., J. G. Zornberg, and R. H. Swan Jr. 2009. “Analysis of a large database of GCL-geomembrane interface shear strength results.” J. Geotech. Geoenviron. Eng. 135 (2): 209–223. https://doi.org/10.1061/(ASCE)1090-0241(2009)135:2(209).
McCartney, J. S., J. G. Zornberg, R. H. Swan Jr., and R. B. Gilbert. 2004. “Reliability-based stability analysis considering GCL shear strength variability.” Geosynthetics Int. 11 (3): 212–232. https://doi.org/10.1680/gein.11.3.188.44489.
Mesri, G., and R. E. Olson. 1970. “Shear strength of montmorillonite.” Géotechnique 20 (3): 261–270. https://doi.org/10.1680/geot.1970.20.3.261.
Olsta, J. T., and R. H. Swan. 2001. “Internal shear strength of a geosynthetic clay liner at high normal loads.” In Proc., Tailings and Mine Waste 2001, 197–200. Fort Collins, CO: Colorado State Univ.
Richardson, G. N. 1997. “GCL internal shear strength requirements.” Geotech. Fabr. Rep. 15 (2): 20–25.
Rowe, R. K., R. W. Brachman, M. S. Hosney, W. A. Take, and D. N. Arnepalli. 2017. “Insight into hydraulic conductivity testing of geosynthetic clay liners (GCLs) exhumed after 5 and 7 years in a cover.” Can. Geotech. J. 54 (8): 1118–1138. https://doi.org/10.1139/cgj-2016-0473.
Sabatini, P. J., L. M. Griffin, R. Bonaparte, R. D. Espinoza, and J. P. Giroud. 2002. “Reliability of state of practice for selection of shear strength parameters for waste containment system stability analyses.” Geotext. Geomembr. 20 (4): 241–262. https://doi.org/10.1016/S0266-1144(02)00013-4.
Thielmann, S. S., P. J. Fox, and C. Athanassopoulos. 2016. “Shear strength of GMX/GCL composite liner under high normal stress.” J. Geotech. Geoenviron. Eng. 142 (5): 04016005. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001457.
von Maubeuge, K. P., and H. Ehrenberg. 2000. “Comparison of peel bond and shear tensile test methods for needlepunched geosynthetic clay liners.” Geotext. Geomembr. 18 (2–4): 203–214. https://doi.org/10.1016/S0266-1144(99)00027-8.
von Maubeuge, K. P., and H. Ehrenberg. 2013. “Peel and shear test comparison and geosynthetic clay liner shear strength correlation.” In Current and future practices for the testing of multi-component geosynthetic clay liners, 78–90, edited by K. von Maubeuge and J. Kline. West Conshohocken, PA: ASTM. https://doi.org/10.1520/STP156220120098.
Vukelić, A., A. Szavits-Nossan, and P. Kvasnička. 2008. “The influence of bentonite extrusion on shear strength of GCL/geomembrane interface.” Geotext. Geomembr. 26 (1): 82–90. https://doi.org/10.1016/j.geotexmem.2007.04.001.
Zanzinger, H. 2016. “Contribution to the long-term shear strength of a needle punched GCL.” Int. J. Geosynthetics Ground Eng. 2 (1): 1–7. https://doi.org/10.1007/s40891-016-0049-3.
Zanzinger, H., and F. Saathoff. 2012. “Long-term internal shear strength of a reinforced GCL based on shear creep rupture tests.” Geotext. Geomembr. 33 (8): 43–50. https://doi.org/10.1016/j.geotexmem.2012.02.007.
Zornberg, J. G., J. S. McCartney, and R. H. Swan Jr. 2005. “Analysis of a large database of GCL internal shear strength results.” J. Geotech. Geoenviron. Eng. 131 (3): 367–380. https://doi.org/10.1061/(ASCE)1090-0241(2005)131:3(367).
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Jan 8, 2020
Accepted: Oct 20, 2020
Published online: Dec 30, 2020
Published in print: Mar 1, 2021
Discussion open until: May 30, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.