Analytical–Empirical Approach for Estimating Kinematic-Response Relationships between Hydrate-Bearing Soils and Standard Soils
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 147, Issue 1
Abstract
Methane hydrate within a soil pore space may significantly modify the mechanical behavior of the sediment. Previous studies have shown that the influence of hydrate on methane-hydrate-bearing sediments (MHBS) is dilative through pore-scale kinematic constraining, which in turn affects mechanical properties such as strength and stiffness. This paper presents a new analytical–empirical approach for evaluating kinematic aspects of MHBS. The suggested approach incorporates explicit experimental kinematics data of the host soil together with an analytical amplification factor. Based on known stress-dilatancy expressions, this analytical factor is found with a strong relation to stress ratios of MHBS to host soil during mechanical testing. A stress ratio model is suggested, which is developed based on a thorough study of various stress ratios from test results of both artificial and natural methane-hydrate-bearing sediments from different works. Using the suggested approach, mechanical models may consist of fewer model parameters, which may increase the model efficiency and yield a deeper understanding of fundamental mechanical characteristics of MHBS.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article. Experimental results from other studies can be found in the references cited.
References
Acosta, M. J. 2016. Vol. 23 of Advances in energy research, 29–75. Hauppauge, NY: Nova Science.
De La Fuente, M., J. Vaunat, and H. Marín-Moreno. 2016. “Composite model to reproduce the mechanical behaviour of methane hydrate bearing sediments.” In Proc., 1st Int. Conf. on Energy Geotechnics, 483–489. Abingdon, UK: Taylor & Francis Group.
Hyodo, M., J. Yoneda, N. Yoshimoto, and Y. Nakata. 2013a. “Mechanical and dissociation properties of methane hydrate-bearing sand in deep seabed.” Soils Found. 53 (2): 299–314. https://doi.org/10.1016/j.sandf.2013.02.010.
Hyodo, M., N. Yoshimoto, A. Kato, and J. Yoneda. 2013b. “Shear strength and deformation of methane hydrate bearing sand with fines.” In Proc., Int. Conf. on Soil Mechanics and Geotechnical Engineering, 1011–1014. Paris: Presses des Ponts.
Krey, V., et al. 2009. “Gas hydrates: Entrance to a methane age or climate threat?” Environ. Res. Lett. 4 (3): 1–6. https://doi.org/10.1088/1748-9326/4/3/034007.
Lin, J., Y. Seol, and J. Choi. 2015. “An SMP critical state model for methane hydrate-bearing sands.” Int. J. Numer. Anal. Methods Geomech. 39 (9): 969–987. https://doi.org/10.1002/nag.2347.
Masui, A., H. Haneda, Y. Ogata, and K. Aoki. 2005. “Effects of methane hydrate formation on shear strength of synthetic methane hydrate sediments.” In Proc., 15th Int. Offshore and Polar Engineering Conf., 364–369. Seoul: International Society of Offshore and Polar Engineers.
Masui, A., K. Miyazaki, H. Haneda, Y. Ogata, and K. Aoki. 2008. “Mechanical characteristics of natural and artificial gas hydrate bearing sediments.” In Proc., 6th Int. Conf. on Gas Hydrates (ICGH 2008), 6–13. Vancouver, BC, Canada: US Dept. of Energy.
Miyazaki, K., N. Tenma, K. Aoki, and T. Yamaguchi. 2012. “A nonlinear elastic model for triaxial compressive properties of artificial methane-hydrate-bearing sediment samples.” Energies 5 (10): 4057–4075. https://doi.org/10.3390/en5104057.
Moridis, G. J., et al. 2011. Challenges, uncertainties and issues facing gas production from gas hydrate deposits. Berkeley, CA: Lawrence Berkeley National Laboratory.
Parente, M. T., S. Mattis, S. Gupta, C. Deusner, and B. Wohlmuth. 2018. “Efficient parameter estimation for a methane hydrate model with active subspaces.” Computat. Geosci. 23 (2): 355–372. https://doi.org/10.1007/s10596-018-9769-x.
Pinkert, S. 2016. “Rowe’s stress-dilatancy theory for hydrate-bearing sand.” Int. J. Geomech. 17 (1): 1–5. https://doi.org/10.1061/(ASCE)GM.1943-622.0000682.
Pinkert, S. 2017. “The lack of true cohesion in hydrate-bearing sands.” Granular Matter 19 (3): 1–11. https://doi.org/10.1007/s10035-017-0742-5.
Pinkert, S., and J. L. H. Grozic. 2014. “Prediction of the mechanical response of hydrate-bearing sands.” J. Geophys. Res. Solid Earth 119 (6): 4695–4707. https://doi.org/10.1002/2013JB010920.
Pinkert, S., and J. L. H. Grozic. 2016. “Experimental verification of a prediction model for hydrate-bearing sand.” J. Geophys. Res. Solid Earth 121 (6): 4147–4155. https://doi.org/10.1002/2015JB012320.
Rowe, P. W. 1962. “The stress-dilatancy relation for static equilibrium of an assembly of particles in contact.” Proc. R. Soc. A: Math., Phys. Eng. Sci. 269 (1339): 500–527. https://doi.org/10.1098/rspa.1962.0193.
Sloan, E. D. 2003. “Fundamental principles and applications of natural gas hydrates.” Nature 426 (6964): 353–359. https://doi.org/10.1038/nature02135.
Sultan, N., and S. Garziglia. 2011. “Geomechanical constitutive modelling of gas-hydrate-bearing sediments.” In Proc., 7th Int. Conf. on Gas Hydrates. Edinburgh, Scotland: US Dept. of Energy.
Uchida, S., K. Soga, and K. Yamamoto. 2012. “Critical state soil constitutive model for methane hydrate soil.” J. Geophys. Res. Solid Earth 117 (3): 1–13. https://doi.org/10.1029/2011JB008661.
Waite, W. F., et al. 2009. “Physical properties of hydrate-bearing sediments.” Rev. Geophys. 47 (4): 1–38. https://doi.org/10.1029/2008RG000279.
Zhang, J., and R. Salgado. 2010. “Stress-dilatancy relation for Mohr-Coulomb soils following a non-associated flow rule.” Géotechnique 60 (3): 223–226. https://doi.org/10.1680/geot.8.T.039.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Aug 21, 2019
Accepted: Jul 1, 2020
Published online: Oct 21, 2020
Published in print: Jan 1, 2021
Discussion open until: Mar 21, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.