Discussion of “Modified NTH Method for Assessing Effective Friction Angle of Normally Consolidated and Overconsolidated Clays from Piezocone Tests” by Zhongkun Ouyang and Paul W. Mayne
This article is a reply.
VIEW THE ORIGINAL ARTICLEPublication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 146, Issue 9
GT.1943-5606.0002339/asset/309e161c-9fef-40ca-9b70-00ecfd2c268e/assets/(asce)gt.1943-5606.0002339.fp.png)
Get full access to this article
View all available purchase options and get full access to this article.
References
Abdulhadi, N. O., J. T. Germaine, and A. J. Whittle. 2012. “Stress dependent behavior of saturated clay.” Can. Geotech. J. 49 (8): 907–916. https://doi.org/10.1139/t2012-057.
Baligh, M. M. 1985. “The strain path method.” J. Geotech. Eng. Div. 111 (9): 1108–1136.
Bjerrum, L. 1972. “Embankments on soft ground: SOA report.” In Vol. 2 of Proc., Specialty Conf. on Performance of Earth and Earth-Supported Structures, 1–54. Reston, VA: ASCE.
California Dept. of Water Resources. 2015. Guidance document for geotechnical analyses. Sacramento, CA: California Dept. of Water Resources.
Casey, B., and T. J. Germaine. 2013. “Stress dependence of shear strength of fine grained soils and correlations with liquid limit.” J. Geotech. Geoenviron. Eng. 139 (10): 1709–1717.
Hunt, C. E., J. M. Pestana, J. D. Bray, and M. Riemer. 2002. “Effect of pile driving on static and dynamic properties of soft clay.” J. Geotech. Geoenviron. Eng. 128 (1): 13–24. https://doi.org/10.1061/(ASCE)1090-0241(2002)128:1(13).
Koutsoftas, D. C. 1981. “Undrained shear strength of a marine clay.” In Laboratory shear strength of soil, edited by R. N. Young and F. C. Townsend, 264–276. West Conshohocken, PA: ASTM.
Koutsoftas, D. C., and J. A. Fischer. 1976. “In-situ undrained shear strength of two marine clays.” J. Geotech. Eng. Div. 102 (9): 989–1005.
Koutsoftas, D. C., and C. C. Ladd. 1985. “Design strengths for an offshore clay.” J. Geotech. Eng. 111 (3): 337–355. https://doi.org/10.1061/(ASCE)0733-9410(1985)111:3(337).
Kulhawy, F. H., and P. W. Mayne. 1990. Manual on estimating soil properties for foundation design. Palo Alto, CA: Electric Power Research Institute.
Ladd, C. C. 1991. “Stability evaluation during staged construction.” J. Geotec. Eng. 117 (4): 540–615. https://doi.org/10.1061/(ASCE)0733-9410(1991)117:4(540).
Ladd, C. C., and D. J. DeGroot. 2003. “Recommended practice for soft ground site characterization: Arthur Casagrande lecture.” In Vol. 1 of Proc., 12th Panamerican Conf. on Soil Mechanics and Geotechnical Engineering, 3–57. Essen, Germany: Verlag Gliickauf.
Ladd, C. C., R. Foott, K. Ishihara, F. Schlosser, and H. G. Poulos. 1977. “Stress-deformation and strength characteristics: SOA report.” In Proc., 9th Int. Conf. on Laboratory Shear Testing of Soils, 342–371. West Conshohocken, PA: ASTM.
Mitchell, J. K. 1976. Fundamentals of soil behavior. New York: Wiley.
Moug, D. M., R. W. Boulanger, J. T. DeJong, and R. A. Yaeger. 2019. “Axisymmetric simulations of cone penetration in saturated clays.” J. Geotech. Geoenviron. Eng. 145 (4): 04019008. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002024.
Schmertmann, J. H. 1991. “The mechanical aging of soils.” J. Geotech. Eng. 117 (9): 1288–1330. https://doi.org/10.1061/(ASCE)0733-9410(1991)117:9(1288).
Terzaghi, K., R. B. Peck, and G. Mesri. 1996. Soil mechanics in engineering practice. Hoboken, NJ: Wiley.
USACE. 2003. Engineering and design: Slope stability. EM 1110-2-1902. Washington, DC: USACE.
Information & Authors
Information
Published In
Journal of Geotechnical and Geoenvironmental Engineering
Volume 146 • Issue 9 • September 2020
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Nov 21, 2019
Accepted: Jan 22, 2020
Published online: Jul 10, 2020
Published in print: Sep 1, 2020
Discussion open until: Dec 10, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.