Negative Effect of Installation on Performance of a Compaction-Grouted Soil Nail in Poorly Graded Stockton Beach Sand
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 146, Issue 8
Abstract
In this study, a latex membrane with a diameter of 50 mm and thickness of 0.5 mm is used to encase an injection hole. The gap between the membrane and the nail rod is fixed to achieve compaction grouting and to prevent fracturing and permeating; hence, a regular grout bulb is easily formed and locked into the soil matrix to provide a pullout force for a compaction-grouted soil nail. For this type of soil nail, two series of physical model tests for an embedded soil nail and a soil nail with a predrilled hole (the soil sample was moistened and could sustain the hole without collapsing during the placement of the nail rod) were conducted to study the influence of the installation methods on the performance of a compaction-grouted soil nail. The results of the two series of tests were compared, and some conclusions were drawn: First, the aforementioned installation methods for a soil nail had little impact on the mass of injected grout, whereas the shape of the cured grout bulb showed some differences based on the type of soil response. Second, compared with that of an embedded soil nail, the pullout force of a postplaced soil nail remarkably decreased because the hole drilled for installation led to a gap between the soil nail and the surrounding soil. In addition, the loss rate correlated with the grouting pressure (i.e., the diameter of the grout bulb). Third, because of the lower soil densification, dilation, and squeeze effect, a slower growth rate (with increasing grouting pressure) of the pullout force (i.e., resistance) was found for the postplaced soil nail relative to that of the embedded soil nail, during which the efficiency of the increasing pullout force decreased.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The work described in this paper is partially supported by ARC Future Fellowship grant (FT140100019), State Key Laboratory for GeoMechanics and Deep Underground Engineering (China University of Mining and Technology) (SKLGDUEK1718), National Natural Science Foundation of China (No. 51722812), the Joint Funds of the National Natural Science Foundation of China (No. U1834206), and the HuXiang Top Talents Gathering Program–Innovation Team (2019RS1008), for which the authors are very grateful.
References
Ajalloeian, R., H. S. Yu, and M. A. Allman. 1996. “Physical and mechanical properties of Stockton Beach sand.” In Proc., 7th Australia New Zealand Conf. on Geomechanics: Geomechanics in a Changing World, 60–65. Barton, Australia: Institution of Engineers, Australia.
Cartier, G., and J. P. Gigan. 1983. “Experiments and observations on soil nailing structures.” In Proc., European Conf. on Soil Mechanics and Foundation Engineering, edited by H. G. Rathmayer and K. H. O. Saari, 473–476. Rotterdam, Netherlands: Elsevier.
FHWA (Federal Highway Administration). 2015. Geotechnical engineering circular No. 7: Soil nail walls—Reference manual. Washington, DC: FHWA.
Franzen, G. 1998. “Soil nailing a laboratory and field study of pull-out capacity.” Ph.D. thesis, Dept. of Geotechnical Engineering, Chalmers Univ. of Technology.
Hong, C. Y., Y. F. Zhang, J. W. Guo, and G. Y. Li. 2016. “Experimental study on the influence of drillhole roughness on the pullout resistance of model soil nails.” Int. J. Geomech. 16 (2): 04015047. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000491.
Hossain, M. A., and J. H. Yin. 2015. “Dilatancy and strength of an unsaturated soil-cement interface in direct shear tests.” Int. J. Geomech. 15 (5): 04014081. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000428.
Kenny, M. J., H. Canakci, and K. Z. Andrawes. 1997. “Densification of granular soils during CFA pile augering.” In Proc., 3rd Int. Conf. on Ground Improvement Geosystems: Ground Improvement Geosystems: Densification and Reinforcement, edited by M. C. R. Davies and F. Chlosser, 134–140. London: ICE Publishing.
Lin, P. Y., and R. J. Bathurst. 2019. “Calibration of resistance factors for load and resistance factor design of internal limit states of soil nail walls.” J. Geotech. Geoenviron. Eng. 145 (1): 04018100. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002005.
Lutenegger, A. J., J. Erikson, and N. Williams. 2014. Evaluating installation disturbance of helical anchors in clay from field vane tests, 129–138. Hawthorne, NJ: Deep Foundation Institute.
Michael, J. M., and B. Giovanni. 2012. “Compaction grouting in Karst Terrain (A Test Program).” In Proc., 4th Int. Conf. on Grouting and Deep Mixing, 1612–1625. Reston, VA: ASCE. https://doi.org/10.1061/9780784412350.0136.
Mitsch, M. P. 1981. “Uplift capacity of multi-helix anchors in sand.” M.S. thesis, Dept. of Civil and Environmental Engineering, Syracuse Univ.
Seo, H. J., L. Pelecanos, Y. S. Kwon, and I. M. Lee. 2017. “Net load–displacement estimation in soil-nail pullout tests.” Proc. Inst. Civ. Eng. Geotech. Eng. 170 (6): 534–547. https://doi.org/10.1680/jgeen.16.00185.
Sharma, M., M. Samanta, and S. Sarkar. 2017. “A laboratory study on pullout capacity of helical soil nail in cohesionless soil.” Can. Geotech. J. 54 (10): 1482–1495. https://doi.org/10.1139/cgj-2016-0243.
Su, L. J., T. C. Chan, J. Yin, S. Chiu, and S. Chiu. 2008. “Influence of overburden pressure on soil–nail pullout.” J. Geotech. Geoenviron. Eng. 134 (9): 1339–1347. https://doi.org/10.1061/(ASCE)1090-0241(2008)134:9(1339).
Su, L. J., J. H. Yin, and W. H. Zhou. 2010. “Influences of overburden pressure and soil dilation on soil nail pull-out resistance.” Comput. Geotech. 37 (4): 555–564. https://doi.org/10.1016/j.compgeo.2010.03.004.
Tokhi, H., G. Ren, and J. Li. 2016. “Laboratory study of a new screw nail and its interaction in sand.” Comput. Geotech. 78 (Sep): 144–154. https://doi.org/10.1016/j.compgeo.2016.05.009.
Tokhi, H., G. Ren, and J. Li. 2018. “Laboratory pullout resistance of a new screw soil nail in residual soil.” Can. Geotech. J. 55 (5): 609–619. https://doi.org/10.1139/cgj-2017-0048.
Tsuha, C. H. C., N. Aoki, G. Rault, L. Thorel, and J. Garnier. 2012. “Evaluation of the efficiencies of helical anchor plates in sand by centrifuge model tests.” Can. Geotech. J. 49 (9): 1102–1114. https://doi.org/10.1139/t2012-064.
Vesic, A. B. 1971. “Breakout resistance of objects embedded in ocean bottom.” J. Soil Mech. Found. Div. 97 (9): 1183–1205.
Wang, Q., S. Y. Wang, S. W. Sloan, D. C. Sheng, and R. Pakzad. 2016. “Experimental investigation of pressure grouting in sand.” Soils Found. 56 (2): 161–173. https://doi.org/10.1016/j.sandf.2016.02.001.
Wang, Q., X. Y. Ye, S. Y. Wang, S. W. Sloan, and D. C. Sheng. 2017a. “Development of a model test system for studying the behaviour of a compaction-grouted soil nail under unsaturated conditions.” Geotech. Test. J. 40 (5): 776–788. https://doi.org/10.1520/GTJ20160229.
Wang, Q., X. Y. Ye, S. Y. Wang, S. W. Sloan, and D. C. Sheng. 2017b. “Experimental investigation of compaction-grouted soil nails.” Can. Geotech. J. 54 (12): 1728–1738. https://doi.org/10.1139/cgj-2017-0063.
Wang, S. Y., R. Luna, and S. Onyejekwe. 2015. “Postliquefaction behavior of low-plasticity silt at various degrees of reconsolidation.” Soil Dyn. Earthquake Eng. 75 (Aug): 259–264. https://doi.org/10.1016/j.soildyn.2015.04.014.
Ye, X. Y., S. Y. Wang, Q. Wang, S. W. Sloan, and D. C. Sheng. 2017. “Numerical and experimental studies of the mechanical behaviour for compaction-grouted soil nails in sandy soil.” Comput. Geotech. 90 (Oct): 202–214. https://doi.org/10.1016/j.compgeo.2017.06.011.
Ye, X. Y., S. Y. Wang, Q. Wang, S. W. Sloan, and D. C. Sheng. 2018a. “Performance of a compaction-grouted soil nail in laboratory tests.” Acta Geotech. 14 (4): 1049–1063. https://doi.org/10.1007/s11440-018-0693-y.
Ye, X. Y., S. Y. Wang, Q. Wang, S. W. Sloan, and D. C. Sheng. 2018b. “The influence of the degree of saturation on compaction-grouted soil nails in sand.” Acta Geotech. 14 (4): 1101–1111. https://doi.org/10.1007/s11440-018-0706-x.
Ye, X. Y., S. Y. Wang, X. Xiao, S. W. Sloan, and D. C. Sheng. 2019. “Numerical study for compaction-grouted soil nail of multiple grout bulbs.” Int. J. Geomech. 19 (2): 04018193. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001342.
Yeo, K. C., S. R. Lo, and J. H. Yin. 2007. “Installation method and overburden pressure on soil nail pullout test.” In Proc., 5th Int. Symp. on Earth Reinforcement: New Horizons in Earth Reinforcement, edited by J. Otani, Y. Miyata, and T. Mukunoki, 321–327. Kyushu, Japan: Taylor and Francis.
Yin, J., and W. Zhou. 2009. “Influence of grouting pressure and overburden stress on the interface resistance of a soil nail.” J. Geotechn. Geoenviron. Eng. 135 (9): 1198–1208. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000045.
Yin, J. H., L. J. Su, R. W. M. Cheung, Y. K. Shiu, and C. Tang. 2009. “The influence of grouting pressure on the pullout resistance of soil nails in compacted completely decomposed granite fill.” Géotechnique 59 (2): 103–113. https://doi.org/10.1680/geot.2008.3672.
Yu, J. D., N. Y. Kim, and J. S. Lee. 2018. “Nondestructive integrity evaluation of soil nails using longitudinal waves.” J. Geotech. Geoenviron. Eng. 144 (11): 04018080. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001976.
Zhang, L. L., L. M. Zhang, and W. H. Tang. 2009. “Uncertainties of field pullout resistance of soil nails.” J. Geotech. Geoenviron. Eng. 135 (7): 966–972. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000014.
Zhou, W. H., J. H. Yin, and C. Y. Hong. 2011. “Finite element modelling of pullout testing on a soil nail in a pull-out box under different overburden and grouting pressures.” Can. Geotech. J. 48 (4): 557–567. https://doi.org/10.1139/t10-086.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Jun 13, 2019
Accepted: Mar 4, 2020
Published online: May 19, 2020
Published in print: Aug 1, 2020
Discussion open until: Oct 19, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.