Technical Notes
Mar 12, 2020

Reduced Gravity Effects on the Strength of Granular Matter: DEM Simulations versus Experiments

Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 146, Issue 5

Abstract

Quantifying the effect of reduced gravity on the behavior of granular matter is essential to understanding the evolution of planetary morphology and will likely affect the design of future extraterrestrial habitats. Yet despite recent research, the effect of reduced gravity/confining pressure on strength remains undetermined, with scarce results ranging from no effect to opposing trends. In this study, we employ high-fidelity discrete element simulations (DEM) of passive failure experiments to measure the influence of gravity on the peak and steady-state friction angle, and the angle of repose of sand. The results are compared against recently reported physical experiments, lending the latter support based on micromechanical information, that is unattainable experimentally. We find that the friction angles experience a small increase with decreasing gravity, while the angle of repose remains almost constant.

Get full access to this article

View all available purchase options and get full access to this article.

References

Bagi, K. 2006. “Analysis of microstructural strain tensors for granular assemblies.” Int. J. Solids Struct. 43 (10): 3166–3184. https://doi.org/10.1016/j.ijsolstr.2005.07.016.
Cavarretta, I., C. O’Sullivan, and M. Coop. 2009. “Applying 2D shape analysis techniques to granular materials with 3D particle geometries.” In Vol. 1145 of AIP Conf. Proc., 833–836. Melville, NY: AIP Publishing LLC.
Chen, H., Y. Liu, X. Zhao, Y. Xiao, and Y. Liu. 2015. “Numerical investigation on angle of repose and force network from granular pile in variable gravitational environments.” Powder Technol. 283 (Oct): 607–617. https://doi.org/10.1016/j.powtec.2015.05.017.
Christoffersen, J., M. Mehrabadi, and S. Nemat-Nasser. 1981. “A micromechanical description of granular material behavior.” J. Appl. Mech. 48 (2): 339–344. https://doi.org/10.1115/1.3157619.
Cundall, P., and O. Strack. 1979. “A discrete numerical model for granular assemblies.” Géotechnique 29 (1): 47–65. https://doi.org/10.1680/geot.1979.29.1.47.
Fukushima, S., and F. Tatsuoka. 1984. “Strength and deformation characteristics of saturated sand at extremely low pressures.” Soils Found. 24 (4): 30–48. https://doi.org/10.3208/sandf1972.24.4_30.
Guo, P., and X. Su. 2007. “Shear strength, interparticle locking, and dilatancy of granular materials.” Can. Geotech. J. 44 (5): 579–591. https://doi.org/10.1139/t07-010.
Hasan, A., and K. Alshibli. 2010. “Discrete element modeling of strength properties of Johnson Space Center (JSC-1A) lunar regolith simulant.” J. Aerosp. Eng. 23 (3): 157–165. https://doi.org/10.1061/(ASCE)AS.1943-5525.0000020.
Hofmeister, P., J. Blum, and D. Heisselmann. 2009. “The flow of granular matter under reduced-gravity conditions.” In Vol. 1145 of AIP Conf. Proc., 71–74. Melville, NY: AIP Publishing LLC.
Jop, P., Y. Forterre, and O. Pouliquen. 2006. “A constitutive law for dense granular flows.” Nature 441 (7094): 727–730. https://doi.org/10.1038/nature04801.
Kawamoto, R., E. Ando, G. Viggiani, and J. Andrade. 2016. “Level set discrete element method for three-dimensional computations with triaxial case study.” J. Mech. Phys. Solids 91 (Jun): 1–13.
Klein, S., and B. White. 1990. “Dynamic shear of granular material under variable gravity conditions.” AIAA J. 28 (10): 1701–1702. https://doi.org/10.2514/3.10461.
Kleinhans, M. G., H. Markies, S. J. De Vet, and F. N. Postema. 2011. “Static and dynamic angles of repose in loose granular materials under reduced gravity.” J. Geophys. Res. Planets 116 (E11).
Marshall, J., R. Hurley, D. Arthur, I. Vlahinić, C. Senatore, K. Iagnemma, B. Trease, and J. Andrade. 2018. “Failures in sand in reduced gravity environments.” J. Mech. Phys. Solids 113 (Apr): 1–12.
Melosh, H. J. 2011. Planetary surface processes. Cambridge, UK: Cambridge University Press.
Nakashima, H., Y. Shioji, T. Kobayashi, S. Aoki, H. Shimizu, J. Miyasaka, and K. Ohdoi. 2011. “Determining the angle of repose of sand under low-gravity conditions using discrete element method.” J. Terramech. 48 (1): 17–26. https://doi.org/10.1016/j.jterra.2010.09.002.
Robert, C., and G. Casella. 2010. Monte Carlo statistical methods. Berlin: Springer.
Rorato, R., M. Arroyo, E. And, and A. Gens. 2019. “Sphericity measures of sand grains.” Eng. Geol. 254 (May): 43–53. https://doi.org/10.1016/j.enggeo.2019.04.006.
Savage, S. 1984. “The mechanics of rapid granular flows.” In Vol. 24 of Advances in applied mechanics, 289–366. New York: Elsevier.
Schofield, M., and C. Wroth. 1968. Critical state soil mechanics. London: McGraw-Hill.
Singh, A., V. Magnanimo, K. Saitoh, and S. Luding. 2015. “The role of gravity or pressure and contact stiffness in granular rheology.” New J. Phys. 17 (4): 043028. https://doi.org/10.1088/1367-2630/17/4/043028.
Sture, S., C. Nicholas, N. Baptiste, M. Lankton, K. Alshibli, B. Jeremic, R. Swanson, and M. Frank. 1998. “Mechanics of granular materials at low effective stresses.” J. Aerosp. Eng. 11 (3): 67–72. https://doi.org/10.1061/(ASCE)0893-1321(1998)11:3(67).
Terzaghi, K., and R. Peck. 1954. Soil mechanics in engineering practice. New York: Wiley.
Vlahinić, I., E. Andò, G. Viggiani, and J. Andrade. 2014. “Towards a more accurate characterization of granular media: Extracting quantitative descriptors from tomographic images.” Granular Matter 16 (1): 9–21. https://doi.org/10.1007/s10035-013-0460-6.
Wadell, H. 1932. “Volume, shape, and roundness of rock particles.” J. Geol. 40 (5): 443–451. https://doi.org/10.1086/623964.
Zou, M., S. Fan, R. Shi, Y. Yang, and J. Li. 2015. “Effect of gravity on the mechanical properties of lunar regolith tested using a low gravity simulation device.” J. Terramech. 60 (Aug): 11–22. https://doi.org/10.1016/j.jterra.2015.04.003.

Information & Authors

Information

Published In

Go to Journal of Geotechnical and Geoenvironmental Engineering
Journal of Geotechnical and Geoenvironmental Engineering
Volume 146Issue 5May 2020

History

Received: Mar 8, 2019
Accepted: Oct 30, 2019
Published online: Mar 12, 2020
Published in print: May 1, 2020
Discussion open until: Aug 12, 2020

Permissions

Request permissions for this article.

Authors

Affiliations

Konstantinos Karapiperis, M.ASCE [email protected]
Graduate Student, Dept. of Mechanical and Civil Engineering, California Institute of Technology, Pasadena, CA 91125. Email: [email protected]
Dept. of Mechanical and Civil Engineering, California Institute of Technology, Pasadena, CA 91125. ORCID: https://orcid.org/0000-0003-4504-9564. Email: [email protected]
José E. Andrade [email protected]
Professor, Dept. of Mechanical and Civil Engineering, California Institute of Technology, Pasadena, CA 91125 (corresponding author). Email: [email protected]

Metrics & Citations

Metrics

Citations

Download citation

If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.

Cited by

View Options

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Media

Figures

Other

Tables

Share

Share

Copy the content Link

Share with email

Email a colleague

Share