Evaluation of Bearing Capacity on Geosynthetic-Reinforced Soil Structures Considering Multiple Failure Mechanisms
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 145, Issue 9
Abstract
This study proposes a limit equilibrium approach to estimating the bearing capacity of strip footings placed on geosynthetic-reinforced soil structures (GRSSs). To assess the multiple mechanisms that may govern the ultimate resistance sustained by GRSSs, logarithmic-spiral, two-part wedge, two-sided general shear, one-sided general shear, and failure above the uppermost geosynthetic layer are proposed. Each of these mechanisms is assessed considering geometry, geotechnical properties, and geosynthetic rupture, whereupon an algorithm selects the minimum, critical bearing capacity and associated failure mechanism for design. Additionally, the effects of foundations placed near the transition between reinforced and unreinforced soil are evaluated. Considering these factors, both the failure mechanism and bearing capacity attained from this analysis are compared with rigorous numerical models, demonstrating agreement. The multimechanism approach is then extended to assess bearing capacity considering various geometric configurations and material properties. Finally, a set of dimensionless charts are presented for convenient assessment of the ultimate bearing capacity of strip footings placed on GRSSs.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The primary author would like to acknowledge the Geosynthetics Institute (GSI) for partial support of this work. Furthermore, he would like to honor Jerry Yamumuro, who kindly bequeathed a fellowship program that partially supported the first author during this work.
References
AASHTO. 2016. Standard specifications for highway bridges. Washington, DC: AASHTO.
Abu-Hejleh, N., T. Wang, and J. G. Zornberg. 2000. “Performance of geosynthetic-reinforced walls supporting bridge and approaching roadway structures.” In Proc., ASCE Geotechnical Special Publication No. 103, Geo-Denver 2000, 218–243. Reston, VA: ASCE.
Abu-Hejleh, N., J. G. Zornberg, T. Wang, and J. Watcharamonthein. 2002. “Monitored displacements of unique geosynthetic-reinforced soil bridge abutments.” Geosynthetics Int. 9 (1): 71–95. https://doi.org/10.1680/gein.9.0211.
Adams, M., J. Nicks, T. Stabile, J. Wu, W. Schlatter, and J. Hartmann. 2011. Geosynthetic reinforced soil integrated bridge system:interim implementation guide. McLean, VA: Federal Highway Administration.
Adams, M. T., P. S. Ooi, and J. E. Nicks. 2014. “Mini-pier testing to estimate performance of full-scale geosynthetic reinforced soil bridge abutments.” Geotech. Test. J. 37 (5): 20140007. https://doi.org/10.1520/GTJ20140007.
Allen, T. M., and R. J. Bathurst. 2013. “Comparison of working stress and limit equilibrium behavior of reinforced soil walls.” In Sound geotechnical research to practice, edited by A. W. Stuedlein and B. R. Christopher, 499–513. Reston, VA: ASCE.
Ausilio, E. 2014. “Seismic bearing capacity of strip footings located close to the crest of geosynthetic reinforced soil structures.” Geotech. Geol. Eng. 32 (4): 885–899. https://doi.org/10.1007/s10706-014-9765-4.
Bathurst, R. J., J. A. Blatz, and M. H. Burger. 2003. “Performance of instrumented large-scale unreinforced and reinforced embankments loaded by a strip footing to failure.” Can. Geotech. J. 40 (6): 1067–1083. https://doi.org/10.1139/t03-052.
Berg, R. R., B. R. Christopher, and N. C. Samtani. 2009. Design of mechanically stabilized earth walls and reinforced soil slopes—Volume I. Washington, DC: Federal Highway Administration.
Binquet, J., and K. L. Lee. 1975. “Bearing capacity tests on reinforced earth slabs.” J. Geotech. Geoenviron. Eng. 101 (12): 1241–1255.
Blatz, J. A., and R. J. Bathurst. 2003. “Limit equilibrium analysis of large-scale reinforced and unreinforced embankments loaded by a strip footing.” Can. Geotech. J. 40 (6): 1084–1092. https://doi.org/10.1139/t03-053.
Choudhary, A. K., J. N. Jha, and K. S. Gill. 2010. “Laboratory investigation of bearing capacity behaviour of strip footing on reinforced flyash slope.” Geotext. Geomembr. 28 (4): 393–402. https://doi.org/10.1016/j.geotexmem.2009.09.007.
Elias, V., B. R. Christopher, and R. R. Berg. 2001. Mechanically stabilized earth walls and reinforced soil slopes-design and construction guidelines. Washington, DC: Federal Highway Administration.
El Sawwaf, M. A. 2007. “Behavior of strip footing on geogrid-reinforced sand over a soft clay slope.” Geotext. Geomembr. 25 (1): 50–60. https://doi.org/10.1016/j.geotexmem.2006.06.001.
Gill, K. S., A. K. Choudhary, J. N. Jha, and S. K. Shukla. 2013. “Experimental and numerical studies of loaded strip footing resting on reinforced fly ash slope.” Geosynthetics Int. 20 (1): 13–25. https://doi.org/10.1680/gein.12.00036.
Gourc, J. P., P. Gotteland, E. Haza, H. Perrier, and E. Baraize. 1995. “Geotextile reinforced structures as bridge abutments: Full-scale experimentation.” In Proc., 5th Int. Conf. on Geosynthetics, 79–92. Jupiter, FL: International Geosynthetics Society.
Guido, V. A., D. K. Chang, and M. A. Sweeney. 1986. “Comparison of geogrid and geotextile reinforced earth slabs.” Can. Geotech. J. 23 (4): 435–440. https://doi.org/10.1139/t86-073.
Hatami, K., and R. J. Bathurst. 2006. “Numerical model for reinforced soil segmental walls under surcharge loading.” J. Geotech. Geoenviron. Eng. 132 (6): 673–684. https://doi.org/10.1061/(ASCE)1090-0241(2006)132:6(673).
Haza, E., P. Gotteland, and J. P. Gourc. 2000. “Design method for local load on a geosynthetic reinforced soil structure.” Geotech. Geol. Eng. 18 (4): 243–267. https://doi.org/10.1023/A:1016623619511.
Huang, C. C., and F. Tatsuoka. 1990. “Bearing capacity of reinforced horizontal sandy ground.” Geotext. Geomembr. 9 (1): 51–82. https://doi.org/10.1016/0266-1144(90)90005-W.
Huang, C. C., and F. Tatsuoka. 1994. “Stability analysis for footings on reinforced sand slopes.” Soils Found. 34 (3): 21–37. https://doi.org/10.3208/sandf1972.34.3_21.
Huang, C. C., F. Tatsuoka, and Y. Sato. 1994. “Failure mechanisms of reinforced sand slopes loaded with a footing.” Soils Found. 34 (2): 27–40. https://doi.org/10.3208/sandf1972.34.2_27.
Ismail, I., and G. P. Raymondm. 1995. “Geosynthetic reinforcement of granular layered soils.” In Vol. 1 of Proc., Geosynthetics ’95, 317–330. St. Paul, MN: North American Geosynthetics Society.
Jahanandish, M., and A. Keshavarz. 2005. “Seismic bearing capacity of foundations on reinforced soil slopes.” Geotext. Geomembr. 23 (1): 1–25. https://doi.org/10.1016/j.geotexmem.2004.09.001.
Ketchart, K. 1997. “Performance of geosynthetic-reinforced soil bridge pier and abutment, Denver, Colorado, USA.” In Mechanically stabilized backfill, 101–116. Rotterdam, Netherlands: A.A. Balkema.
Khing, K. H., B. M. Das, V. K. Puri, E. E. Cook, and S. C. Yen. 1993. “The bearing-capacity of a strip foundation on geogrid-reinforced sand.” Geotext. Geomembr. 12 (4): 351–361. https://doi.org/10.1016/0266-1144(93)90009-D.
Lee, K. M., and V. R. Manjunath. 2000. “Experimental and numerical studies of geosynthetic-reinforced sand slopes loaded with a footing.” Can. Geotech. J. 37 (4): 828–842. https://doi.org/10.1139/t00-016.
Leshchinsky, B. 2015. “Bearing capacity of footings placed adjacent to c′-ϕ′ slopes.” J. Geotech. Geoenviron. Eng. 143 (1): 04015022. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001306.
Leshchinsky, B., and Y. Xie. 2017. “Bearing capacity for spread footings placed near slopes.” J. Geotech. Geoenviron. Eng. 143 (1): 06016020. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001578.
Leshchinsky, D. 1997. Design procedure for geosynthetic reinforced steep slopes. Newark, DE: Leshchinsky, Inc.
Leshchinsky, D., and R. H. Boedeker. 1989. “Geosynthetic reinforced soil structures.” J. Geotech. Eng. 115 (10): 1459–1478. https://doi.org/10.1061/(ASCE)0733-9410(1989)115:10(1459).
Liu, H., and M. S. Won. 2014. “Stress dilatancy and reinforcement load of vertical-reinforced soil composite: Analytical method.” J. Eng. Mech. 140 (3): 630–639. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000686.
Luo, N., and R. J. Bathurst. 2018. “Deterministic and random FEM analysis of full-scale unreinforced and reinforced embankments.” Geosynthetics Int. 25 (2): 164–179. https://doi.org/10.1680/jgein.17.00040.
Mandel, J., and J. Salencon. 1972. “Force portante d’un sol sur une assise rigide (étude théorique).” Geotechnique 22 (1): 79–93. https://doi.org/10.1680/geot.1972.22.1.79.
Meyerhof, G. G. 1963. “Some recent research on the bearing capacity of foundations.” Can. Geotech. J. 1 (1): 16–26. https://doi.org/10.1139/t63-003.
Michalowski, R. 1997. “An estimate of the influence of soil weight on bearing capacity using limit analysis.” Soils Found. 37 (4): 57–64. https://doi.org/10.3208/sandf.37.4_57.
Nicks, J. E., D. Esmaili, and M. T. Adams. 2016. “Deformations of geosynthetic reinforced soil under bridge service loads.” Geotext. Geomembr. 44 (4): 641–653. https://doi.org/10.1016/j.geotexmem.2016.03.005.
Schmertmann, J. H., J. P. Hartman, and P. R. Brown. 1978. “Improved strain influence factor diagrams.” J. Geotech. Geoenviron. Eng. 104 (8): 1131–1135.
Selvadurai, P. S., and C. T. Gnanendran. 1989. “An experimental study of a footing located on a sloped fill: Influence of a soil reinforcement layer.” Can. Geotech. J. 26 (3): 467–473. https://doi.org/10.1139/t89-059.
Sharma, R., Q. Chen, M. Abu-Farsakh, and S. Yoon. 2009. “Analytical modeling of geogrid reinforced soil foundation.” Geotext. Geomembr. 27 (1): 63–72. https://doi.org/10.1016/j.geotexmem.2008.07.002.
Sommers, A. N., and B. V. S. Viswanadham. 2009. “Centrifuge model tests on the behavior of strip footing on geotextile-reinforced slopes.” Geotext. Geomembr. 27 (6): 497–505. https://doi.org/10.1016/j.geotexmem.2009.05.002.
Terzaghi, K. 1943. Theoretical soil mechanics. New York: Wiley.
Turker, E., E. Sadoglu, E. Cure, and B. A. Uzuner. 2014. “Bearing capacity of eccentrically loaded strip footings close to geotextile-reinforced sand slope.” Can. Geotech. J. 51 (8): 884–895. https://doi.org/10.1139/cgj-2014-0055.
Vesic, A. S. 1973. “Analysis of ultimate loads of shallow foundations.” J. Soil Mech. Found. Div. 99 (1): 45–73.
Wayne, M. H., J. Han, and K. Akins. 1998. “The design of geosynthetic reinforced foundations.” In Proc., Geo-Congress, Geotechnical Special Publication No. 76, 1–18. Reston, VA: ASCE.
Wu, J. T. H., and T. Q. Pham. 2013. “Load-carrying capacity and required reinforcement strength of closely spaced soil-geosynthetic composites.” J. Geotech. Geoenviron. Eng. 139 (9): 1468–1476. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000885.
Xiao, C., J. Han, and Z. Zhang. 2016. “Experimental study on performance of geosynthetic-reinforced soil model walls on rigid foundations subjected to static footing loading.” Geotext. Geomembr. 44 (1): 81–94. https://doi.org/10.1016/j.geotexmem.2015.06.001.
Xie, Y., and B. Leshchinsky. 2015. “MSE walls as bridge abutments: Optimal reinforcement density.” Geotext. Geomembr. 43 (2): 128–138. https://doi.org/10.1016/j.geotexmem.2015.01.002.
Yang, S., B. Leshchinsky, F. Zhang, and Y. Gao. 2016. “Required strength of geosynthetic in reinforced soil structures supporting spread footings in three dimensions.” Comput. Geotech. 78: 72–87. https://doi.org/10.1016/j.compgeo.2016.04.010.
Yetimoglu, T., J. T. Wu, and A. Saglamer. 1994. “Bearing capacity of rectangular footings on geogrid-reinforced sand.” J. Geotech. Eng. 120 (12): 2083–2099. https://doi.org/10.1061/(ASCE)0733-9410(1994)120:12(2083).
Yoo, C. 2001. “Laboratory investigation of bearing capacity behavior of strip footing on geogrid-reinforced sand slope.” Geotext. Geomembr. 19 (5): 279–298. https://doi.org/10.1016/S0266-1144(01)00009-7.
Yoo, C., and S. B. Kim. 2008. “Performance of a two-tier geosynthetic reinforced segmental retaining wall under a surcharge load: Full-scale load test and 3D finite element analysis.” Geotext. Geomembr. 26 (6): 460–472. https://doi.org/10.1016/j.geotexmem.2008.05.008.
Zhao, A. 1996a. “Failure loads on geosynthetic reinforced soil structures.” Geotext. Geomembr. 14 (5): 289–300. https://doi.org/10.1016/0266-1144(96)89796-2.
Zhao, A. 1996b. “Limit analysis of geosynthetic-reinforced soil slopes.” Geosynthetics Int. 3 (6): 721–740. https://doi.org/10.1680/gein.3.0082.
Zornberg, J. G., N. Sitar, and J. K. Mitchell. 1998. “Performance of geosynthetic reinforced slopes at failure.” J. Geotech. Geoenviron. Eng. 124 (8): 670–683. https://doi.org/10.1061/(ASCE)1090-0241(1998)124:8(670).
Information & Authors
Information
Published In
Journal of Geotechnical and Geoenvironmental Engineering
Volume 145 • Issue 9 • September 2019
Copyright
©2019 American Society of Civil Engineers.
History
Received: Mar 12, 2018
Accepted: Jan 16, 2019
Published online: Jun 26, 2019
Published in print: Sep 1, 2019
Discussion open until: Nov 26, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.