Calibration of Resistance Factors for Load and Resistance Factor Design of Internal Limit States of Soil Nail Walls
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 145, Issue 1
Abstract
A general approach for calibration of resistance factors for load and resistance factor design (LRFD) of pullout and tensile failure internal limit states of soil nail walls is presented. The calibration of resistance factor values includes the influence of nominal load and nominal resistance model type and accuracy (method bias), bias dependencies, uncertainty in nominal load and resistance values, and possible cross-correlation (dependency) between nominal load and resistance terms. The current default Federal Highway Administration simplified method and an improved version are used to compute maximum nail loads under operational (in-service) conditions. Nail pullout capacity is calculated using the effective stress method adopted in Hong Kong and a more accurate modified version. Resistance factors are calibrated for a range of load factors and target reliability indexes. Example design outcomes for internal limit states of a soil nail wall using different load and resistance model combinations are presented. The benefit of using the more accurate improved load and resistance models for soil nail wall pullout design is demonstrated by a reduction in total length of soil nails.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are grateful for financial support through an ENGAGE research grant awarded to the corresponding author by the Natural Sciences and Engineering Research Council of Canada (NSERC).
References
AASHTO. 2017. LRFD bridge design specifications. 8th ed. Washington, DC: AASHTO.
Allen, T. M., A. S. Nowak, and R. J. Bathurst. 2005. Calibration to determine load and resistance factors for geotechnical and structural design. Washington, DC: Transportation Research Board and National Research Council.
Babu, S. G. L., and V. P. Singh. 2011. “Reliability-based load and resistance factors for soil-nail walls.” Can. Geotech. J. 48 (6): 915–930. https://doi.org/10.1139/t11-005.
Baecher, G. B., and J. T. Christian. 2003. Reliability and statistics in geotechnical engineering. Chichester, UK: Wiley.
Bathurst, R. J., T. M. Allen, and A. S. Nowak. 2008. “Calibration concepts for load and resistance factor design (LRFD) of reinforced soil walls.” Can. Geotech. J. 45 (10): 1377–1392. https://doi.org/10.1139/T08-063.
Bathurst, R. J., B. Huang, and T. M. Allen. 2011a. “Load and resistance factor design (LRFD) calibration for steel grid reinforced soil walls.” Georisk 5 (3–4): 218–228. https://doi.org/10.1080/17499518.2010.489828.
Bathurst, R. J., B. Huang, and T. M. Allen. 2012. “LRFD calibration of the ultimate pullout limit state for geogrid reinforced soil retaining walls.” ASCE Int. J. Geomech. 12 (4): 399–413. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000219.
Bathurst, R. J., and S. Javankhoshdel. 2017. “Influence of model type, bias and input parameter variability on reliability analysis for simple limit states in soil–structure interaction problems.” Georisk 11 (1): 42–54. https://doi.org/10.1080/17499518.2016.1154160.
Bathurst, R. J., S. Javankhoshdel, and T. M. Allen. 2017. “LRFD calibration of simple soil-structure limit states considering method bias and design parameter variability.” ASCE J. Geotech. Geoenviron. Eng. 143 (9): 04017053. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001735.
Bathurst, R. J., Y. Miyata, and T. Konami. 2011b. “Limit states design calibration for internal stability of multi-anchor walls.” Soils Found. 51 (6): 1051–1064. https://doi.org/10.3208/sandf.51.1051.
Cheung, R. W. M., and K. W. Shum. 2012. Review of the approach for estimation of pullout resistance of soil nails. Hong Kong: Geotechnical Engineering Office (GEO), Civil Engineering and Development Dept., Hong Kong Government.
CSA (Canadian Standards Association). 2019. Canadian highway bridge design code. 12th ed. CAN/CSA-S6-14. Mississauga, ON, Canada: CSA.
D’Appolonia. 1999. Developing new AASHTO LRFD specifications for retaining walls. Monroeville, PA: Ground Technology, Inc.
DeVries, B. J., and X. Yu. 2016. “LRFD calibration of pullout resistance factors using survival analysis for soil nails in North Texas.” J. Infrastruct. Syst. 22 (2): 04016003. https://doi.org/10.1061/(ASCE)IS.1943-555X.0000286.
Duncan, J. M. 2000. “Factors of safety and reliability in geotechnical engineering.” J. Geotech. Geoenviron. Eng. 126 (4): 307–316. https://doi.org/10.1061/(ASCE)1090-0241(2000)126:4(307).
Fenton, G. A., F. Naghibi, D. Dundas, R. J. Bathurst, and D. V. Griffiths. 2016. “Reliability-based geotechnical design in the 2014 Canadian highway bridge design code.” Can. Geotech. J. 53 (2): 236–251. https://doi.org/10.1139/cgj-2015-0158.
GEO (Geotechnical Engineering Office). 2008. Geoguide 7: Guide to soil nail design and construction. Hong Kong: GEO, Civil Engineering and Development Dept., The Government of the Hong Kong Special Administrative Region.
Hong, C. Y., J. H. Yin, H. F. Pei, and W. H. Zhou. 2013. “Experimental study on the pullout resistance of pressure-grouted soil nails in the field.” Can. Geotech. J. 50 (7): 693–704. https://doi.org/10.1139/cgj-2012-0103.
Huang, B. H., R. J. Bathurst, and T. M. Allen. 2012. “LRFD calibration for steel strip reinforced soil walls.” J. Geotech. Geoenviron. Eng. 138 (8): 922–933. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000665.
Kim, D., and R. Salgado. 2012a. “Load and resistance factors for external stability checks of mechanically stabilized earth walls.” J. Geotech. Geoenviron. Eng. 138 (3): 241–251. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000595.
Kim, D., and R. Salgado. 2012b. “Load and resistance factors for internal stability checks of mechanically stabilized earth walls.” J. Geotech. Geoenviron. Eng. 138 (8): 910–921. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000664.
Lazarte, C. A. 2011. Proposed specifications for LRFD soil-nailing design and construction. Washington, DC: Transportation Research Board and National Research Council.
Lazarte, C. A., V. Elias, D. Espinoza, and P. J. Sabatini. 2003. Geotechnical engineering circular No. 7: Soil nail walls. Washington, DC: FHWA.
Lazarte, C. A., H. Robinson, J. E. Gómez, A. Baxter, A. Cadden, and R. Berg. 2015. Geotechnical engineering circular No. 7: Soil nail walls, Reference manual. Washington, DC: FHWA.
Lin, P., and R. J. Bathurst. 2018a. “Influence of cross-correlation between nominal load and resistance on reliability-based design for simple linear soil-structure limit states.” Can. Geotech. J. 55 (2): 279–295. https://doi.org/10.1139/cgj-2017-0012.
Lin, P., and R. J. Bathurst. 2018b. “Reliability-based internal limit states analysis and design of soil nails using different load and resistance models.” ASCE J. Geotech. Geoenviron. Eng. 144 (5): 04018022. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001862.
Lin, P., R. J. Bathurst, S. Javankhoshdel, and J. Liu. 2017a. “Statistical analysis of the effective stress method and modifications for prediction of ultimate bond strength of soil nails.” Acta Geotech. 12 (1): 171–182. https://doi.org/10.1007/s11440-016-0477-1.
Lin, P., R. J. Bathurst, and J. Liu. 2017b. “Statistical evaluation of the FHWA simplified method and modifications for predicting soil nail loads.” ASCE J. Geotech. Geoenviron. Eng. 143 (3): 04016107. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001614.
Lin, P., and J. Liu. 2017. “Analysis of resistance factors for LRFD of soil nail walls against external stability failures.” Acta Geotech. 12 (1): 157–169. https://doi.org/10.1007/s11440-016-0443-y.
Melchers, R. E. 1999. Structural reliability analysis and prediction. 2nd ed. Chichester, UK: Wiley.
Nowak, A. S., and K. R. Collins. 2012. Reliability of structures. 2nd ed. Boca Raton, FL: CRC Press.
Paikowsky, S. G., et al. 2004. Load and resistance factor design (LRFD) for deep foundations. Washington, DC: Transportation Research Board of the National Academies.
Phear, A., C. Dew, B. Ozsoy, N. J. Wharmby, J. Judge, and A. D. Barley. 2005. Soil nailing–best practice guidance. London: Construction Industry Research and Information Association (CIRIA).
Watkins, A. T., and G. E. Powell. 1992. “Soil nailing to existing slopes as landslip preventive works.” Hong Kong Eng. 20 (3): 20–27.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Feb 15, 2018
Accepted: Jul 27, 2018
Published online: Nov 9, 2018
Published in print: Jan 1, 2019
Discussion open until: Apr 9, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.