Compression and Strength Characteristics of Two Silts of Low and High Plasticity
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 144, Issue 7
Abstract
The potential for enhanced strength or stiffness arising from the microstructure of natural silty soils compared with their reconstituted state is examined using the framework for clays, to assess the extent to which it can be used for silts. A detailed study performed on two clayey silts of low and high plasticity, respectively, in their intact and reconstituted state, is used to illustrate the different response of the silts compared with clays in terms of compressibility and strength, e.g., multiplicity and shape of the normal compression lines and strong dilative tendencies during undrained and drained shearing. This paper shows that the response of the reconstituted silts can be used as a reference to identify the influence of the microstructure on the compressibility and strength of the intact silts. The results are found to give clear signs of structure in both compression and shearing only for the low-plasticity silt. Stiffness measurements corroborate these findings.
Get full access to this article
View all available purchase options and get full access to this article.
References
Allman, M. A., and J. H. Atkinson. 1992. “Mechanical properties of natural Bothkennar clay.” Géotechnique 42 (2): 289–301. https://doi.org/10.1680/geot.1992.42.2.289.
Altuhafi, F., B. A. Baudet, and P. Sammonds. 2010. “The mechanics of subglacial sediment: An example of new ‘transitional behaviour’.” Can. Geotech. J. 47 (7): 775–790. https://doi.org/10.1139/T09-136.
Arroyo, M., M. Ciantia, R. Castellanza, and A. Gens. 2011. “A soft-rock model for cement-improved clays.” In Proc., 15th European Conf. on Soil Mechanics and Geotechnical Engineering: Geotechnics of Hard Soils-Weak Rocks. edited by A. Anagnostopoulos, M. Pachakis, and C. Tsatsanifos. 501–506. Athens, Greece: IOS Press.
Atkinson, J. H., and J. A. Little. 1988. “Undrained triaxial strength and stress-strain characteristics of a glacial till soil.” Can. Geotech. J. 25 (3): 428–439. https://doi.org/10.1139/t88-048.
Bishop, A. W., and L. D. Wesley. 1975. “A hydraulic triaxial apparatus for controlled stress path testing.” Géotechnique 25 (4): 657–670. https://doi.org/10.1680/geot.1975.25.4.657.
Boulanger, R. W., and I. M. Idriss. 2006. “Liquefaction susceptibility criteria for silts and clays.” J. Geotech. Geoenviron. Eng. 132 (11): 1413–1426. https://doi.org/10.1061/(ASCE)1090-0241(2006)132:11(1413).
Buchan, S., and D. Taylor Smith. 1999. “Deep-sea sediment compression curves: Some controlling factors, spurious overconsolidation, predictions, and geophysical reproduction.” Mar. Georesour. Geotechnol. 17 (1): 65–81. https://doi.org/10.1080/106411999274016.
Burland, J. B. 1990. “On the compressibility and shear strength of natural clays.” Géotechnique 40 (3): 329–378. https://doi.org/10.1680/geot.1990.40.3.329.
Burland, J. B., S. Rampello, V. N. Georgiannou, and G. Galabresi. 1996. “A laboratory study of the strength of four stiff clays.” Géotechnique 46 (3): 491–514. https://doi.org/10.1680/geot.1996.46.3.491.
Burland, J. B., and M. Symes. 1982. “A simple axial displacement gauge for use in the triaxial apparatus.” Géotechnique 32 (1): 62–65. https://doi.org/10.1680/geot.1982.32.1.62.
Carrera, A., M. Coop, and R. Lancellotta. 2011. “Influence of grading on the mechanical behaviour of Stava tailings.” Géotechnique 61 (11): 935–946. https://doi.org/10.1680/geot.9.P.009.
Chandler, R. J. 2000. “Clay sediments in depositional basins: The geotechnical cycle.” Q. J. Eng. Geol. Hydrogeol. 33 (1): 7–39. https://doi.org/ 10.1144/qjegh.33.1.7.
Cotecchia, F., and R. J. Chandler. 1997. “The influence of structure on the pre-failure behaviour of a natural clay.” Géotechnique 47 (3): 523–544. https://doi.org/10.1680/geot.1997.47.3.523.
Cuccovillo, T., and M. R. Coop. 1999. “On the mechanics of structured sands.” Géotechnique 49 (6): 741–760. https://doi.org/10.1680/geot.1999.49.6.741.
Ferreira, P. M. V., and A. V. D. Bica. 2006. “Problems of identification of the effects of structure and critical state in a soil with transitional behaviour.” Géotechnique 56 (7): 445–454. https://doi.org/10.1680/geot.2006.56.7.445.
Georgiannou, V. N., and J. B. Burland. 2001. “A laboratory study of post-rupture strength.” Géotechnique 51 (8): 665–675. https://doi.org/10.1680/geot.2001.51.8.665.
Georgiannou, V. N., and J. B. Burland. 2006. “A laboratory study of slip surface formation in an intact natural stiff clay.” Géotechnique 56 (8): 551–559. https://doi.org/10.1680/geot.2006.56.8.551.
Georgiannou, V. N., P. M. V. Ferreira, and F. Altuhafi. 2011. “Measurements of stiffness of Greek stiff soils.” In Proc., 15th European Conf. on Soil Mechanics and Geotechnical Engineering, Athens 1, edited by A. Anagnostopoulos, M. Pachakis, and C. Tsatsanifos, 185–190. Amsterdam: IOS Press.
Hight, D. W., A. J. Bond, and J. D. Legge. 1992. “Characterization of the Bothkennar clay: An overview.” Géotechnique 42 (2): 303–347. https://doi.org/10.1680/geot.1992.42.2.303.
Hight, D. W., and V. N. Georgiannou. 1995. “The effect of sampling on clayey sands.” Geotechnique 45 (2): 237–247. https://doi.org/10.1680/geot.1995.45.2.237.
Hong, Z. S., X. Bian, Y. J. Cui, Y. F. Gao, and L. L. Zeng. 2013. “Effect of initial water content on undrained shear behavior of reconstituted clays.” Géotechnique 63 (6): 441–450. https://doi.org/10.1680/geot.11.P.114.
Hong, Z. S., J. Yin, and Y. J. Cui. 2010. “Compression behavior of reconstituted soils at high initial water contents.” Géotechnique 60 (9): 691–700. https://doi.org/10.1680/geot.09.P.059.
Hyde, A. F. L., T. Higuchi, and K. Yasuhara. 2006. “Liquefaction, cyclic mobility, and failure of silt.” J. Geotech. Geoenviron. Eng. 132 (6): 716–735. https://doi.org/10.1061/(ASCE)1090-0241(2006)132:6(716).
Ishihara, K., F. Tatsuoka, and S. Yasuda. 1975. “Undrained deformation and liquefaction of sand under cyclic stresses.” Soils Found. 15 (1): 29–44. https://doi.org/10.3208/sandf1972.15.29.
Kavvadas, M., A. G. Anagnostopoulos, V. N. Georgiannou, and M. E. Bardanis. 2003. “Characterisation and engineering properties of the Corinth Marl.” In Proc., Workshop on Characterisation and Engineering Properties of Natural Soils, 2nd ed., edited by D. W. Hight, S. Leroueil, K. K. Phoon, and T. S. Tan, 1435–1459. Rotterdam, Netherlands: A.A. Balkema Publishers.
Martins, F. B., L. A. Bressani, M. R. Coop, and A. V. D. Bica. 2001. “Some aspects of the compressibility behavior of a clayey sand.” Can. Geotech. J. 38 (6): 1177–1186. https://doi.org/10.1139/t01-048.
Mitchell, J. K. 1976. Fundamentals of Soil Behavior. New York: Wiley.
Mitchell, J. K., and K. Soga. 2005. Fundamentals of Soil Behavior. 3rd ed. Hoboken, NJ: Wiley.
Nocilla, A., M. R. Coop, and F. Colleselli. 2006. “The mechanics of an Italian silt: An example of ‘transitional’ behavior.” Geotechnique 56 (4): 261–271. https://doi.org/10.1680/geot.2006.56.4.261.
Ponzoni, E., A. Nocilla, M. R. Coop, and F. Colleselli. 2014. “Identification and quantification of transitional modes of behavior in sediments of Venice lagoon.” Géotechnique 64 (9): 694–708. https://doi.org/10.1680/geot.13.P.166.
Roscoe, K. H., A. N. Schofield, and C. P. Wroth. 1958. “On the yielding of soils.” Géotechnique 8 (1): 22–53. https://doi.org/10.1680/geot.1958.8.1.22.
Shipton, B., and M. R. Coop. 2015. “Transitional behaviour in sands with plastic and non-plastic fines.” Soils Found. 55 (1): 1–16. https://doi.org/10.1016/j.sandf.2014.12.001.
Skempton, A. W. 1970. “The consolidation of clays by gravitational compaction.” Q. J. Geol. Soc. 125 (1–4): 373–411. https://doi.org/10.1144/gsjgs.125.1.0373.
Skempton, A. W., and R. D. Northey. 1952. “The sensitivity of clays.” Géotechnique 3 (1): 30–53. https://doi.org/10.1680/geot.1952.3.1.30.
Smith, P. R., R. J. Jardine, and D. W. Hight. 1992. “The yielding of Bothkennar clay.” Géotechnique 42 (2): 257–274. https://doi.org/10.1680/geot.1992.42.2.257.
Stark, T. D., R. M. Ebeling, and K. R. Daly. 2000. “Stress-strain behavior and hyperbolic parameters of structured silt.” In Proc., Specialty Conf. GEO-Denver. Denver: ASCE.
Stark, T. D., R. M. Ebeling, and J. J. Vettel. 1994. “Hyperbolic stress-strain parameters for silts.” J. Geotech. Eng. 120 (2): 420–441. https://doi.org/10.1061/(ASCE)0733-9410(1994)120:2(420).
Terzaghi, K. 1941. “Undisturbed clay samples and undisturbed clays.” J. Boston Soc. Civ. Eng. 28 (3): 45–65.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Mar 21, 2017
Accepted: Dec 19, 2017
Published online: May 10, 2018
Published in print: Jul 1, 2018
Discussion open until: Oct 10, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.