Effects of Short-Term Mechanical Loads on the Cracking of Glass Tubes in a 500-m-Deep Rock Formation
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 144, Issue 3
Abstract
To determine the reliability of deep geological repositories for radioactive waste, understanding the mechanical interactions between the host rock and structures is of great importance. Among repository concepts, high-level activity waste disposal cells consist of drilled underground horizontal microtunnels with a steel casing (0.9 m diameter). The French Andra’s Underground Research Laboratory conducts ongoing research activities to characterize the casing reliability over an initial period of at least 100 years, for reversibility purposes. Several experiments are dedicated to short-term mechanical analyses of the 500-m-deep host rock formation. Due to the complex hydromechanical response of the rock to drilling, unintuitive mechanical loadings are observed in comparison with the surrounding lithostatic equilibrium stress state. In this work, these short-term mechanical loads applied on glass tubes inside a borehole are investigated. A finite-element model is developed to predict adequate load scenarios, source of the anisotropic continuum damage.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors wish to thank the French national radioactive waste management agency, Andra, for the financial support of this work. The French Alternative Energies and Atomic Energy Commission (CEA), Marcoule (LCLT), France, and its collaborators are also gratefully acknowledged for their support with the use of the developed continuum damage mechanics code.
References
ABAQUS version 6.12 [Computer software]. SIMULIA, Dassault Systèmes, France.
Armand, G., et al. (2014). “Geometry and properties of the excavation-induced fractures at the Meuse/Haute-Marne URL drifts.” Rock Mech. Rock Eng., 47(1), 21–41.
Barth, N. (2013). “Sur la modélisation et la simulation du comportement mécanique endommageable de verres borosilicatés sous sollicitation thermique.” Ph.D. thesis, Université de Strasbourg, Strasbourg, France (in French).
Barth, N., et al. (2014). “Simulation of cooling and solidification of three-dimensional bulk borosilicate glass: Effect of structural relaxations.” Mech. Time-Depend. Mater., 18(1), 81–96.
Barth, N., George, D., Ahzi, S., Rémond, Y., Doquet, V., and Bouyer, F. (2012). “Modeling and simulation of the cooling process of borosilicate glass.” J. Eng. Mater. Technol., 134(4), 041001.
Barth, N., George, D., Ahzi, S., Rémond, Y., Khaleel, M. A., and Bouyer, F. (2015). “Simulation of solidification, relaxation and long-term behavior of a borosilicate glass.” Proc., TMS Middle East—Mediterranean Materials Congress on Energy and Infrastructure Systems (MEMA 2015), I. Karaman, R. Arroyave, and E. Masad, eds., Minerals, Metals and Materials Society, Doha, Qatar, 511–519.
Bonniaud, R., Jouan, A., and Sombret, C. (1980). “Large scale production of glass for high level radioactive waste.” Nucl. Chem. Waste Manage., 1(1), 3–16.
Bumbieler, F., Conil, N., Morel, J., and Armand, G. (2012). “Mechanical load applied on a steel casing in a 500 m deep clay formation—Small scale and full scale in-situ experiments.” Proc., 5th Int. Meeting on Clays in Natural and Engineered Barriers for Radioactive Waste Confinement, Vol. 44, INIS, IAEA, Vienna, Austria, 166–167.
Bumbieler, F., Necib, S., Morel, J., Crusset, D., and Armand, G. (2015). “Mechanical and SCC behavior of an API5L steel casing within the context of deep geological repositories for radioactive waste.” Proc., ASME Pressure Vessels Piping Conf., ASME, New York.
Couture, J. (1977). “Present status of reprocessing technology: Basic outlines of large reprocessing plants.” Ann. Nucl. Energy, 4(6–8), 263–272.
Crevoisier, D., Bouyer, F., and Gin, S. (2011). “Semi-stochastic generator (FraGMA) of 2D fractured media by mechanistic analogy—Application to reactive transport in a fractured package of vitrified nuclear waste.” Comput. Mater. Sci., 50(4), 1387–1398.
Dubé, M., Doquet, V., Constantinescu, A., George, D., Rémond, Y., and Ahzi, S. (2010). “Modeling of thermal shock-induced damage in borosilicate glass.” Mech. Mater., 42(9), 863–872.
Faletti, D., and Ethridge, L. (1988). “A method for predicting cracking in waste glass canisters.” Nucl. Chem. Waste Manage., 8(2), 123–133.
Gin, S., et al. (2013). “An international initiative on long-term behavior of high-level nuclear waste glass.” Mater. Today, 16(6), 243–248.
Kamizono, H., and Niwa, K. (1984). “An estimation of the thermal shock resistance of simulated nuclear waste glass under water quenching conditions.” J. Mater. Sci. Lett., 3(7), 588–590.
Keshavan, M. K., Sargent, G. A., and Conrad, H. (1980). “Statistical analysis of the Hertzian fracture of Pyrex glass using the Weibull distribution function.” J. Mater. Sci., 15(4), 839–844.
Mukerji, J., and Sanyal, A. S. (1976). “Vitreous matrices for the containment of high-level Purex waste.” Ann. Nucl. Energy, 3(5–6), 253–274.
Sun, X., and Khaleel, M. A. (2004). “Modeling of glass fracture damage using continuum damage mechanics—Static spherical indentation.” Int. J. Damage Mech., 13(3), 263–285.
Vienna, J. D., Ryan, J. V., Gin, S., and Inagaki, Y. (2013). “Current understanding and remaining challenges in modeling long-term degradation of borosilicate nuclear waste glasses.” Int. J. Appl. Glass Sci., 4(4), 283–294.
Wileveau, Y., Cornet, F. H., Desroches, J., and Blumling, P. (2007). “Complete in situ stress determination in an argillite sedimentary formation.” Phys. Chem. Earth Parts A/B/C, 32(8–14), 866–878.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Jun 16, 2016
Accepted: Aug 10, 2017
Published online: Jan 4, 2018
Published in print: Mar 1, 2018
Discussion open until: Jun 4, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.