Estimating Spatial Variations in Bedrock Depth and Weathering Degree in Decomposed Granite from Surface Waves
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 143, Issue 7
Abstract
In Singapore, sudden changes of bedrock depth and highly variable weathering degrees in residual soils are commonly observed. This study employed the dispersive characteristics of Rayleigh-type surface waves from combined active-source and passive-source surface-wave techniques to (1) generate S-wave velocity () profiles of residual soils and (2) estimate spatial variations in the weathering degree and bedrock depth of residual soils in Singapore, ranging from completely weathered soil to weathered rock. Finally, the feasibility of detecting bedrock depth in Bukit Timah granite was examined by several approaches based on (1) preselected , (2) normalized Rayleigh wave phase velocity (), and (3) average . The results of the field experiments showed that this combined noninvasive multichannel analysis of surface waves (MASW) method can be successfully used to determine the profile of residual soils, which includes approximate bedrock detection. The newly proposed average -based approach using the ratios of average values of top soil layers (10–40 m) especially appears to be a simple, automatic, objective, and standardized method to identify depth to bedrock (within about 5-m resolution), which is confirmed by conventional boring investigations.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors appreciate the financial support from Singapore Land Transport Authority (LTA, Award Number R-302-000-164-490).
References
Aki, K. (1957). “Space and time spectra of stationary stochastic waves, with special reference to microtremors.” Bull. Earthquake Res. Ins., 35, 415–456.
Anbazhagan, P., Sheikh, M. N., and Parihar, A. (2012). “Influence of rock depth on seismic site classification for shallow bedrock regions.” Nat. Hazards Rev., 108–121.
Anbazhagan, P., and Sitharam, T. (2008). “Site characterization and site response studies using shear wave velocity.” J. Seismol. Earthquake Eng., 10(2), 53–67.
Anbazhagan, P., and Sitharam, T. G. (2009). “Spatial variability of the depth of weathered and engineering bedrock using multichannel analysis of surface wave method.” Pure Appl. Geophys., 166(3), 409–428.
Aung, A. M. W., and Leong, E. C. (2011). “Stiffness profiles of residual soil sites using continuous surface wave method.” Unsaturated Soils: Theory and Practice 2011, Kasetsart Univ., Thailand.
Bay, J. A. (2000). “Site characterization using the spectral analysis of surface waves method.” Seminar, Univ. of Alabama, Birmingham, AL.
British Standards Institution. (1999). “Code of practice for site investigations.” BS 5930, London.
BSSC (Building Seismic Safety Council). (2001). “NEHRP recommended provisions for seismic regulations for new buildings and other structures, 2000 Ed. Part 1: Provisions.”, FEMA, Washington, DC.
Bullen, K. E. (1953). An introduction to the theory of seismology, Cambridge University Press, Cambridge, U.K.
CEN (European Committee for Standardization). (2004). “Eurocode 8: Design of structures for earthquake resistance. Part 1: General rules, seismic actions and rules for buildings.” EN 1998-1:2004. Brussels, Belgium.
Fookes, P. G. (1997). “Tropical residual soils: A geological society engineering group working party revised report.” Geological Society Publishing House, Bath, U.K.
Hayashi, K. (2008). “Development of surface-wave methods and its application to site investigations.” Ph.D. thesis, Kyoto Univ., Kyoto, Japan.
Hayashi, K. (2009). “Effect of array shape on the spatial auto-correlation analysis of micro-tremor array measurements.” Proc., Symp. on the Application of Geophysics to Engineering and Environmental Problems, Environment and Engineering Geophysical Society, Denver, 616–625.
Hayashi, K., and Kita, T. (2010). “Applicability of a spatial autocorrelation method (SPAC) using a linear array in comparison with triangular and l-shaped arrays.” 23rd Symp. on the Application of Geophysics to Engineering and Environmental Problems, Environment and Engineering Geophysical Society, Denver.
Hayashi, K., and Suzuki, H. (2004). “CMP cross-correlation analysis of multi-channel surface-wave data.” Explor. Geophys., 35(1), 7–13.
Hudson, J. A. (1993). Rock testing and site characterization: Comprehensive rock engineering, Pergamon Press, Oxford, U.K.
Hughes, D. (2002). “An overview of the Caltrans borehole geophysical logging program.” Proc., Geophysics 2002. 2nd Annual Conf. on the Application of Geophysical and NDT Methodologies to Transportation Facilities and Infrastructure, Federal Highway Administration and California Dept. of Transportation, CA.
ICC (International Code Council). (2006). International building code, 5th Ed., Falls Church, VA.
Kovach, R. L. (1965). “Seismic surface waves: Some observations and recent developments.” Phys. Chem. Earth, 6, 251–314.
Lay, T., and Wallace, T. C. (1995). Modern global seismology, Academic Press, San Diego.
Lin, C.-P., Lin, C.-H., Dai, Y.-Z., and Chien, C.-J. (2012). “Assessment of ground improvement with improved columns by surface wave testing.” Proc., Grouting and Deep Mixing, ASCE, Reston, VA, 483–492.
MATLAB [Computer software]. MathWorks, Natick, MA.
Moon, S.-W., Khan, Q., and Ku, T. (2016). “Application of MASW methods for investigations of shear wave velocity in residual soils of Singapore.” Proc., Geotechnical and Structural Engineering Congress 2016, ASCE, Reston, VA, 1688–1699.
Nazarian, S., and Stokoe, K. (1983). “Evaluation of moduli and thicknesses of pavement systems by spectral-analysis-of-surface-waves method.”, Center for Transportation Research, Univ. of Texas, Austin, TX, 1–138.
Nazarian, S., and Stokoe, K. (1984). “In situ shear wave velocities from spectral analysis of surface waves.” Proc., World Conf. on Earthquake Engineering, Prentice Hall, San Francisco, 31–38.
Okada, H., and Suto, K. (2003). “The microtremor survey method.” Society of Exploration Geophysicists, Tulsa, OK.
Olona, J., Pulgar, J. A., Fernández-Viejo, G., López-Fernández, C., and González-Cortina, J. M. (2010). “Weathering variations in a granitic massif and related geotechnical properties through seismic and electrical resistivity methods.” Near Surf. Geophys., 8(6), 585–599.
Park, C. B., Miller, R. D., and Xia, J. (1999). “Multichannel analysis of surface waves.” Geophysics, 64(3), 800–808.
Pitts, J. (1983). “The origin, nature and extent of recent deposits in Singapore.” Proc., 1st Int. Seminar on Construction Problems in Soft Soils, Nanyang Technological Institute, Singapore, 1–18.
Pitts, J. (1992). Landforms and geomorphic evolution of the islands during the quaternary, Singapore University Press, Singapore.
PWD (Public Works Department). (1976). “The geology of the Republic of Singapore.” Singapore, 1–79.
Rahardjoa, H., Aungb, K. K., Leongc, E. C., and Rezaurd, R. B. (2004). “Characteristics of residual soils in Singapore as formed by weathering.” Eng. Geol., 73(1–2), 157–169.
Rix, G. J., Hebeler, G. L., and Orozco, M. C. (2002). “Near-surface profiling in the new Madrid seismic zone using surface-wave methods.” Seismol. Res. Lett., 73(3), 380–392.
Ryden, N. (2004). “Surface wave testing of pavements.” Ph.D. thesis, Lund Univ., Lund, Sweden.
Sharma, J., Chu, J., and Zhao, J. (1999). “Geological and geotechnical features of Singapore: An overview.” Tunnelling Underground Space Technol., 14(4), 419–431.
Stokoe, K. H., Wright, S., Bay, J., and Roesset, J. (1994). “Characterization of geotechnical sites by SASW method.” Geophys. Charact. Sites, 15–25.
Sun, C.-G., Han, J.-T., and Cho, W. (2012). “Representative shear wave velocity of geotechnical layers by synthesizing in-situ seismic test data in Korea.” J. Eng. Geol., 22(3), 293–307.
Tamrakar, P., and Luke, B. (2013). “Feasibility of approximating depth to shallow bedrock directly from the Rayleigh wave dispersion curve.” Geotech. Test. J., 36(6), 882–890.
Tran, K. T., and Hiltunen, D. R. (2011). “An assessment of surface wave techniques at the Texas A&M national geotechnical experimentation site.” Proc., GeoRisk 2011: Geotechnical Risk Assessment and Management, ASCE, Reston, VA, 859–866.
Xia, J., Miller, R. D., and Park, C. B. (1999). “Estimation of near-surface shear wave velocity by inversion of Rayleigh waves.” Geophysics, 64(3), 691–700.
Yokoi, T., Hayashi, K., and Aoike, K. (2006). “A case study on dependence of the complex coherence function on the azimuth SPAC method of microtremor array measurement.” Proc., 114th SEGJ Conf., The Society of Exploration Geophysicists of Japan (SEGJ), Tokyo, 138–141.
Zhao, J., Broms, B., Zhou, Y., and Choa, V. (1994). “A study of the weathering of the Bukit Timah granite. Part B: Field and laboratory investigations.” Bull. Int. Assoc. Eng. Geology 50(1), 105–111.
Zhao, J., Lee, K. W., and Choa, V. (1995). “Construction and utilisation of rock caverns in the Bukit Timah granite of Singapore.” Nanyang Technological Univ., Singapore.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Jun 13, 2016
Accepted: Nov 16, 2016
Published ahead of print: Mar 6, 2017
Published online: Mar 7, 2017
Published in print: Jul 1, 2017
Discussion open until: Aug 7, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.