Piecewise-Linear Formulation of Coupled Large-Strain Consolidation and Unsaturated Flow. I: Model Development and Implementation
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 143, Issue 7
Abstract
A mass-conservative formulation of one-dimensional (1D) coupled large-strain consolidation and unsaturated flow using a piecewise-linear formulation is developed. The volume and water-content changes in the unsaturated zone are described using three-dimensional (3D) constitutive surfaces of void ratio and gravimetric water content as functions of net stress and matric suction, whereas the volume change in the saturated zone is described using a two-dimensional (2D) curve relating void ratio to Terzaghi effective stress. The hydraulic conductivity varies with both void ratio and suction in the unsaturated zone, and with void ratio only in the saturated zone. The associated nonlinearities are addressed by solving the flow-continuity equation for water mass conservation through a finite-difference scheme in a piecewise-linear manner. The unknowns are calculated from variables in the previous time step without requiring iteration. A novel algorithm is developed to smoothly model transition between the saturated and unsaturated zones. Four types of top boundary conditions are formulated to account for complex soil–atmosphere hydraulic interactions. The developed program is also capable of performing a quasi-unsaturated analysis, which uses the saturated soil’s constitutive relationships in the unsaturated zone, similar to the approach of several models currently used in practice. The theoretical and numerical development of the model is described in this paper, and is followed by verifications of the program’s implementation using a numerical example of saturated large-strain consolidation and an analytical solution to unsaturated flow. Validation of the quasi-unsaturated and unsaturated formulations is presented in the companion paper, using comparisons with numerical cases as well as laboratory and field data.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was funded by a Collaborative Research and Development Grant jointly funded by the Canadian Oil Sands Alliance and Natural Science and Engineering Research Council of Canada (NSERC).
References
Alonso, E. E., Gens, A., and Josa, A. (1990). “A constitutive model for partially saturated soils.” Géotechnique, 40(3), 405–430.
Alonso, E. E., Vaunat, J., and Gens, A. (1999). “Modelling the mechanical behaviour of expansive clays.” Eng. Geol., 54(1), 173–183.
Bishop, A. W., and Blight, G. E. (1963). “Some aspects of effective stress in saturated and partly saturated soils.” Géotechnique, 13(3), 177–197.
Brooks, R. H., and Corey, A. T. (1964). “Hydraulic properties of porous media and their relation to drainage design.” Trans. ASAE, 7(1), 26–0028.
Daliri, F., Kim, H., Simms, P., and Sivathayalan, S. (2014). “Impact of desiccation on monotonic and cyclic shear strength of thickened gold tailings.” J. Geotech. Geoenviron. Eng., .
Daliri, F., Simms, P., and Sivathayalan, S. (2016). “Shear and dewatering behaviour of densified gold tailings in a laboratory simulation of multi-layer deposition.” Can. Geotech. J., 53(8), 1246–1257.
Deng, A., and Zhou, Y. (2016). “Modeling electroosmosis and surcharge preloading consolidation. I: Model formulation.” J. Geotech. Geoenviron. Eng., .
De Vries, D. A. (1987). “The theory of heat and moisture transfer in porous media revisited.” Int. J. Heat Mass Transfer, 30(7), 1343–1350.
Fisseha, B., Bryan, R., and Simms, P. (2010). “Evaporation, unsaturated flow, and salt accumulation in multilayer deposits of “paste” gold tailings.” J. Geotech. Geoenviron. Eng., 1703–1712.
Fox, P. J. (2007). “Coupled large strain consolidation and solute transport. I: Model development.” J. Geotech. Geoenviron. Eng., 3–15.
Fox, P. J., and Berles, J. D. (1997). “CS2: A piecewise-linear model for large strain consolidation.” Int. J. Numer. Anal. Methods Geomech., 21(7), 453–475.
Fox, P. J., and Pu, H. (2012). “Enhanced CS2 model for large strain consolidation.” Int. J. Geomech., 574–583.
Fox, P. J., Pu, H., and Berles, J. (2014). “CS3: Large strain consolidation model for layered soils.” J. Geotech. Geoenviron. Eng., .
Fredlund, D. G., and Morgenstern, N. R. (1976). “Constitutive relations for volume change in unsaturated soils.” Can. Geotech. J., 13(3), 261–276.
Fredlund, D. G., and Morgenstern, N. R. (1977). “Stress state variables for unsaturated soils.” J. Geotech. Geoenviron. Eng., 103(GT5), 447–466.
Fredlund, D. G., and Rahardjo, H. (1993). Soil mechanics for unsaturated soils, Wiley, Hoboken, NJ.
Fredlund, D. G., and Xing, A. (1994). “Equations for the soil-water characteristic curve.” Can. Geotech. J., 31(4), 521–532.
Fujiyasu, Y., and Fahey, M. (2000). “Experimental study of evaporation from saline tailings.” J. Geotech. Geoenviron. Eng., 18–27.
Gallipoli, D., Wheeler, S. J., and Karstunen, M. (2003). “Modelling the variation of degree of saturation in a deformable unsaturated soil.” Géotechnique, 53(1), 105–112.
Georgiadis, K., Potts, D. M., and Zdravkovic, L. (2005). “Three-dimensional constitutive model for partially and fully saturated soils.” Int. J. Geomech., 244–255.
Gibson, R. E., England, G. L., and Hussey, M. J. L. (1967). “The theory of one-dimensional consolidation of saturated clays.” Géotechnique, 17(3), 261–273.
Lee, K., and Sills, G. C. (1979). “A moving boundary approach to large strain consolidation of a thin soil layer.” Proc., 3rd Int. Conf. on Numerical Methods in Geomechanics, W. Whittle, ed., A.A. Balkema, Leiden, Netherlands, 163–173.
Leong, E. C., and Rahardjo, H. (1997). “Permeability functions for unsaturated soils.” J. Geotech. Geoenviron. Eng., 1118–1126.
Matthews, J. G., Dhadli, N., House, P., and Simms, P. (2011). “Field trials of thin-lift deposition of amended mature fine tailings at the Muskeg River Mine in Northern Alberta.” Proc., 14th Int. Seminar on Paste and Thickened Tailings, R. Jewell and A. Fourie, eds., Australian Centre for Geomechanics, Crawley, Australia, 271–280.
McVay, M., Townsend, F., and Bloomquist, D. (1986). “Quiescent consolidation of phosphatic waste clays.” J. Geotech. Eng., 1033–1049.
Meric, D., Hellweger, F., Barbuto, S., Rahbar, N., Alshawabkeh, A. N., and Sheahan, T. C. (2013). “Model prediction of long-term reactive core mat efficacy for capping contaminated aquatic sediments.” J. Environ. Eng., 564–575.
Sadeghi, M., Shokri, N., and Jones, S. B. (2012). “A novel analytical solution to steady-state evaporation from porous media.” Water Resour. Res., 48(9), W09516.
Seneviratne, N. H., Fahey, M., Newson, T. A., and Fujiyasu, Y. (1996). “Numerical modelling of consolidation and evaporation of slurried mine tailings.” Int. J. Numer. Anal. Methods Geomech., 20(9), 647–671.
Sheng, D., Fredlund, D. G., and Gens, A. (2008). “A new modelling approach for unsaturated soils using independent stress variables.” Can. Geotech. J., 45(4), 511–534.
Sheng, D., Sloan, S. W., Gens, A., and Smith, D. W. (2003). “Finite element formulation and algorithms for unsaturated soils. Part I: Theory.” Int. J. Numer. Anal. Methods Geomech., 27(9), 745–765.
Simms, P., Dunmola, A., Fisseha, B., and Bryan, R. (2010). “Generic modeling of desiccation for cyclic deposition of thickened tailings to maximize density and to minimize oxidation.” Proc., 13th Int. Seminar on Paste and Thickened Tailings, R. Jewell and A. Fourie, eds., Australian Centre for Geomechanics, Crawley, Australia, 293–303.
Simms, P. H., and Yanful, E. K. (2002). “Predicting soil-water characteristic curves of compacted plastic soils from measured pore-size distributions.” Géotechnique, 52(4), 269–278.
Simms, P. H., and Yanful, E. K. (2005). “A pore-network model for hydromechanical coupling in unsaturated compacted clayey soils.” Can. Geotech. J., 42(2), 499–514.
Soleimani, S., Simms, P., Dunmola, A., Freeman, G., and Wilson. G. W. (2014). “Desiccation and consolidation in thin-lift deposition of polymer-amended mature fine tailings.” Proc., 17th Int. Seminar on Paste and Thickened Tailings, R. Jewell, A. Fourie, P. S. Wells, and D. van Zyl, eds., Australian Centre for Geomechanics, Crawley, Australia, 307–322.
Sun, W., and Sun, D. A. (2012). “Coupled modelling of hydro-mechanical behaviour of unsaturated compacted expansive soils.” Int. J. Numer. Anal. Methods Geomech., 36(8), 1002–1022.
Tarantino, A. (2009). “A water retention model for deformable soils.” Géotechnique, 59(9), 751–762.
Townsend, F. C., and McVay, M. C. (1990). “SOA: Large strain consolidation predictions.” J. Geotech. Eng., 116(2), 222–243.
Van Genuchten, M. T. (1980). “A closed-form equation for predicting the hydraulic conductivity of unsaturated soils.” Soil Sci. Soc. Am. J., 44(5), 892–898.
Vaunat, J., Romero, E., and Jommi, C. (2000). “An elastoplastic hydromechanical model for unsaturated soils.” Experimental evidence and theoretical approaches in unsaturated soils, Taylor & Francis, London, 121–138.
Vu, H. Q., and Fredlund, D. G. (2006). “Challenges to modelling heave in expansive soils.” Can. Geotech. J., 43(12), 1249–1272.
Wells, P. S., Revington, A., and Omotoso, O. (2011). “Mature fine tailings drying–technology update.” Proc., 14th Int. Seminar on Paste and Thickened Tailings, R. Jewell and A. Fourie, eds., Australian Centre for Geomechanics, Crawley, Australia, 155–166.
Wheeler, S. J., Sharma, R. S., and Buisson, M. S. R. (2003). “Coupling of hydraulic hysteresis and stress–strain behaviour in unsaturated soils.” Géotechnique, 53(1), 41–54.
Wilson, G. W., Fredlund, D. G., and Barbour, S. L. (1997). “The effect of soil suction on evaporative fluxes from soil surfaces.” Can. Geotech. J., 34(1), 145–155.
Yao, D. T., de Oliveira-Filho, W. L., Cai, X. C., and Znidarcic, D. (2002). “Numerical solution for consolidation and desiccation of soft soils.” Int. J. Numer. Anal. Methods Geomech., 26(2), 139–161.
Yong, R. N., Siu, S. K., and Sheeran, D. E. (1983). “On the stability and settling of suspended solids in settling ponds. Part I: Piece-wise linear consolidation analysis of sediment layer.” Can. Geotech. J., 20(4), 817–826.
Information & Authors
Information
Published In
Journal of Geotechnical and Geoenvironmental Engineering
Volume 143 • Issue 7 • July 2017
Copyright
©2017 American Society of Civil Engineers.
History
Received: Feb 8, 2016
Accepted: Sep 26, 2016
Published ahead of print: Feb 28, 2017
Published online: Mar 1, 2017
Published in print: Jul 1, 2017
Discussion open until: Aug 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.