Experimental and Numerical Observations of the Frequency-Domain Method in Bender-Element Testing
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 143, Issue 2
Abstract
In bender-element (BE) testing, shear-wave velocities are measured using two main methods: time-domain analysis of vibration data from pulse excitation and frequency-domain analysis of vibration from sine-sweep excitation. The frequency-domain analysis can be performed automatically. However, its results show high variability because they are affected by different variables such as the frequency content of the excitation, the resonant frequency of the BE system, and the resolution of the frequency-domain analysis. The reliability of the frequency-domain method is studied in this paper using simplified mathematical models and experimental results from BEs, miniature accelerometers, and resonant-column (RC) tests. The mathematical models are used to understand the effects of different variables in the frequency-domain method. Both laboratory and numerical results show that amplification peaks in the transfer function of the BE system can significantly affect the estimation of the shear-wave velocity. A modified frequency-domain analysis is proposed to enhance the reliability of the method using a high-frequency narrowband excitation outside the resonant peaks of the BE system. Results from the modified frequency-domain analysis tests show less than 10% error in the measurement of the shear-wave velocity with respect to the RC results.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This paper is a result of the financial support due to the research project POCI/ECM/55589/2004—Dynamic properties in residual soils from granite: Strain rate, frequency, and time effects—and developed under the research activities of ICIST of IST and CEC from FEUP, supported by pluri-annual funding from FCT (Portuguese Science and Technology Foundation). Javier Camacho-Tauta acknowledges the support from Nueva Granada Military University, Research Project INV-ING-1765. This research is part of a study on nondestructive testing of infrastructure. Support is also provided by the Natural Sciences and Engineering Research Council of Canada (NSERC).
References
Ali, H. (2015). “Study of laboratory and field techniques to measure shear wave parameters—Frequency effects.” Ph.D. thesis, Univ. of Waterloo, Waterloo, ON, Canada.
Alvarado, G., and Coop, M. R. (2012). “On the performance of bender elements in triaxial tests.” Geotechnique, 62(1), 1–17.
Arroyo, M., Muir Wood, D., Greening, P. D., Medina, L., and Rio, J. (2006). “Effects of sample size on bender-based axial G0 measurements.” Geotechnique, 56(1), 39–52.
Arulnathan, R., Boulanger, R. W., and Riemer, M. F. (1998). “Analysis of bender element tests.” Geotech. Test. J., 21(2), 120–131.
Brignoli, E. G., Gotti, M., and Stokoe, K. H. I. (1996). “Measurement of shear waves in laboratory specimens by means of piezoelectric transducers.” Geotech. Test. J., 19(4), 384–397.
Camacho-Tauta, J. (2011). “Evaluation of the small-strain stiffness of soil by non-conventional dynamic testing methods.” Ph.D. thesis, Technical Univ. of Lisbon, Lisbon, Portugal.
Camacho-Tauta, J., Cascante, G., Santos, J. A., and Viana da Fonseca, A. (2011). “Measurements of shear wave velocity by resonant-column test, bender element test and miniature accelerometers.” Proc., 2011 Pan-Am Geotechnical Conf., Canadian Geotechnical Society, Richmond, Canada.
Camacho-Tauta, J., Cascante, G., Viana da Fonseca, A., and Santos, J. A. (2015). “Time and frequency domain evaluation of bender element systems.” Geotechnique, 65(7), 548–562.
Camacho-Tauta, J., Santos, J. A., Ferreira, C., and Viana da Fonseca, A. (2008). “Moving windows algorithm to reduce uncertainties in bender element testing.” 11th Portuguese National Congress of Geotechnics, Portuguese Society of Geotechnics, Coimbra, Portugal, 149–156.
Cascante, G., Vanderkooy, J., and Chung, W. (2003). “Difference between current and voltage measurements in resonant-column testing.” Can. Geotech. J., 40(4), 806–820.
Cascante, G., Vanderkooy, J., and Chung, W. (2005). “A new mathematical model for resonant-column measurements including eddy-current effects.” Can. Geotech. J., 42(1), 121–135.
Dyvik, R., and Madshus, C. (1985). “Lab measurements of using bender elements.” Proc., ASCE Annual Convention on Advances in the Art of Testing Soils under Cyclic Conditions, V. Khosla, ed., ASCE, Reston, VA, 186–196.
Ferreira, C. (2008). “The use of seismic wave velocities in the measurement of stiffness of a residual soil.” Ph.D. thesis, Univ. of Porto, Porto, Portugal.
Greening, P., and Nash, D. (2004). “Frequency domain determination of G0 using bender elements.” ASTM Geotech. Test. J., 27(3), 1–7.
Ismail, M., Sharma, S., and Fahey, M. (2005). “A small true triaxial apparatus with wave velocity measurement.” ASTM Geotech. Test. J., 28(2), 1–10.
Jovičić, V., Coop, M. R., and Simić, M. (1996). “Objective criteria for determining from bender element tests.” Geotechnique, 46(2), 357–362.
Kaarsberg, E. A. (1975). “Elastic-wave velocity measurements in rocks and other materials by phase-delay methods.” Geophysics, 40(6), 955–960.
Lee, J.-S., and Santamarina, J. C. (2005). “Bender elements: Performance and signal interpretation.” J. Geotech. Geoenviron. Eng., 1063–1070.
Pallara, O., Mattone, M., and Lo Presti, D. C. F. (2008). “Bender elements: Bad source—Good receiver.” Deformational characteristics of geomaterials, IOS Press, Atlanta, 697–702.
Rio, J. (2006). “Advances in laboratory geophysics using bender elements.” Ph.D. thesis, Univ. of London, London.
Rio, J., Greening, P., and Medina, L. (2003). “Influence of sample geometry on shear wave propagation using bender elements.” Chapter 121, Deformation characteristics of geomaterials, H. Di Benedetto, H. Geoffroy, T. Doanh, and C. Sauzéat, eds., Swets & Zeitlinger, Lisse, Netherlands, 963–967.
Shirley, D. J. (1978). “An improved shear wave transducer.” J. Acoust. Soc. Am., 63(5), 1643–1645.
Shirley, D. J., and Hampton, L. D. (1978). “Shear-wave measurement in laboratory sediments.” J. Acoust. Soc. Am., 63(2), 607–613.
Styler, M. A., and Howie, J. A. (2013). “Combined time and frequency domain approach to the interpretation of bender-element tests on sand.” ASTM Geotech. Test. J., 36(5), 1–11.
Viana da Fonseca, A., Ferreira, C., and Fahey, M. (2009). “A framework interpreting bender element tests, combining time-domain and frequency-domain methods.” ASTM Geotech. Test. J., 32(2), 1–17.
Viggiani, G., and Atkinson, J. H. (1995). “Interpretation of bender element tests.” Geotechnique, 45(1), 149–154.
Yamashita, S., Kawaguchi, T., Nakata, Y., Mikami, T., Fujiwara, T., and Shibuya, S. (2009). “Interpretation of international parallel test on the measurement of using bender elements.” Soils Found., 49(4), 631–650.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: May 11, 2015
Accepted: Jun 27, 2016
Published online: Aug 17, 2016
Discussion open until: Jan 17, 2017
Published in print: Feb 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.