Technical Papers
Jun 17, 2016

Lateral Load-Displacement Behavior of Pipelines in Unsaturated Sands

Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 142, Issue 11

Abstract

Conventional design guidelines for buried pipelines are based on the assumption that soil is either dry or fully saturated. In unsaturated soils, such an assumption may lead to underestimation of load from externally imposed ground movement. Such loads are generated because the water meniscus between soil particles creates an additional interparticle force due to suction, which in turn makes the soil stiffer and stronger. This paper presents a methodology for predicting lateral loads on pipelines in unsaturated sandy soils by investigating soil-pipe interaction with full-scale tests and characterizing unsaturated soil behavior with properties from triaxial tests. A constitutive model was developed, and finite-element (FE) simulations were performed and compared with the full-scale test results to validate the modeling process. Additional FE simulations were conducted to assess the maximum lateral load on pipelines buried in different Class II unsaturated sands. The full-scale tests and FE simulations show that increased strength and stiffness associated with soil suction increases lateral loads on pipelines and thus need to be considered when designing pipelines for externally imposed ground movement. The modeling procedures and results can be used to predict lateral loads on underground pipelines subjected to construction and earthquake-induced ground movements, landslides, and subsidence. Because most pipelines are buried in unsaturated soil, the results have widespread relevance in design and construction.

Get full access to this article

View all available purchase options and get full access to this article.

References

ABAQUS version 6.8 [Computer software]. Dassault Systèmes, Providence, RI.
Alonso, E., Gens, A., and Josa, A. (1990). “A constitutive model for partially saturated soils.” Geotechnique, 40(3), 405–430.
Arya, L. M., and Paris, J. F. (1981). “A physicoempirical model to predict soil moisture characteristics from particle-size distribution and bulk density data.” Soil Sci. Soc. Am. J., 45(6), 1023–1030.
ASCE. (1984). “Guidelines for the seismic design of oil and gas pipeline systems.” Gas and Liquid Fuel Lifelines of the ASCE Technical Council on Lifeline Earthquake Engineering, Reston, VA.
ASTM. (2011). “Standard practice for underground installation of thermoplastic pipe for sewers and other gravity-flow application.” D2321-11, West Conshohoken, PA.
Been, K., and Jefferies, M. G. (1985). “A state parameter for sands.” Geotechnique, 35(2), 99–112.
Bishop, A. W. (1959). “The principles of effective stress.” Tecnisk Ukeblad, 106(39), 859–863.
British Standards Institution. (1990). “Methods of test for soils for civil engineering purposes. Shear strength tests (effective stress).” BS 1377–8, London.
Cheong, T. P. (2006). “Numerical modelling of soil-pipeline interaction.” Ph.D. thesis, Univ. of Cambridge, Cambridge, U.K.
Fern, J., Soga, K., and Robert, D. J. (2014a). “Shear strength and dilatancy of partially saturated sand in direct shear tests.” Proc., TC105 ISSMGE Int. Symp. on Geomechanics from Micro to Macro, Taylor & Francis, London, 1391–1396.
Fern, J., Soga, K., Robert, D. J., and Sakanoue, T. (2014b). “Shear strength and dilatancy of unsaturated silica sand in triaxial compression tests.” Proc., 14th Int. Conf. of Int. Association for Computer Methods and Recent Advances in Geomechanics, Taylor & Francis, London, 535–540.
François, B., and Laloui, L. (2008). “ACMEG-TS: A constitutive model for unsaturated soils under non-isothermal conditions.” Int. J. Numer. Anal. Methods Geomech., 32(16), 1955–1988.
Honegger, D., and Nyman, D. J. (2004). “Guidelines for the seismic design and assessment of natural gas and liquid hydrocarbon pipelines.”, Pipeline Research Council International, Houston.
Jefferies, M. G. (1993). “Nor-Sand: A simple critical state model for sand.” Geotechnique, 43(1), 91–103.
Jung, J., O’Rourke, T. D., and Olson, N. A. (2013). “Lateral soil-pipe interaction in dry and partially saturated sand.” J. Geotech. Geoenviron. Eng., 2028–2036.
Loret, B., and Khalili, N. (2002). “An effective stress elastic-plastic model for unsaturated porous media.” Mech. Mater., 34(2), 97–116.
Marshall, T., and Holmes, J. (1988). Soil physics, 2nd Ed., Cambridge University Press, Cambridge, U.K.
Matsuoka, H., and Nakai, T. (1985). “Relationship among Tresca, Mises, Mohr-Coulomb and Matsuoka-Nakai failure criteria.” Soil Found., 25(4), 123–128.
Olson, N. (2009). “Soil performance for large-scale soil-pipeline tests.” Ph.D. thesis, Cornell Univ., Ithaca, NY.
O’Rourke, T. D., et al. (2008). “Geotechnics of pipeline system response to earthquakes.” Proc., Geotechnical Earthquake Engineering and Soil Dynamics IV, ASCE, Reston, VA.
O’Rourke, T. D. (2010). “Geohazards and large geographically distributed systems.” Geotechnique, 60(7), 503–504.
O’Rourke, T. D., Jung, J., and Argyrou, C. (2015). “Underground infrastructure response to earthquake-induced ground deformation.” Proc., 6th Int. Conf. on Earthquake Geotechnical Engineering, International Society for Soil Mechanics and Found Engineering, ISSMGE.
Robert, D. J. (2010). “Soil-pipeline interaction in unsaturated soils.” Ph.D. thesis, Univ. of Cambridge, Cambridge, U.K.
Robert, D. J., and Soga, K. (2013). “Soil–pipeline interaction in unsaturated soils.” Chapter 13, Mechanics of unsaturated geomaterials, L. Laloui, ed., Wiley, London, 303–325.
Robert, D. J., Soga, K., and O’Rourke, T. D. (2016). “Pipelines subjected to fault movement in dry and unsaturated soils.” Int. J. Geomech., C4016001.
Schofield, A., and Wroth, P. (1968). Critical state soil mechanics, 2nd Ed., McGraw-Hill, London.
Turner, J. E. (2004). “Lateral force-displacement behavior of pipes in partially saturated sand.” M.S. thesis, Cornell Univ., Ithaca, NY.
Yimsiri, S., Soga, K., Yoshizaki, K., Dasari, G. R., and O’Rourke, T. D. (2004). “Lateral and upward soil-pipeline interactions in sand for deep embedment conditions.” J. Geotech. Geoenviron. Eng., 830–842.

Information & Authors

Information

Published In

Go to Journal of Geotechnical and Geoenvironmental Engineering
Journal of Geotechnical and Geoenvironmental Engineering
Volume 142Issue 11November 2016

History

Received: Jan 19, 2015
Accepted: Jan 22, 2016
Published online: Jun 17, 2016
Published in print: Nov 1, 2016
Discussion open until: Nov 17, 2016

Permissions

Request permissions for this article.

Authors

Affiliations

D. J. Robert [email protected]
Lecturer in Civil Engineering, School of Engineering, RMIT Univ., Melbourne, VIC 3001, Australia (corresponding author). E-mail: [email protected]
K. Soga, M.ASCE [email protected]
Professor of Civil Engineering, Dept. of Engineering, Univ. of Cambridge, Trumpington St., Cambridge CB2 1PZ, U.K. E-mail: [email protected]
T. D. O’Rourke, Dist.M.ASCE [email protected]
Professor of Civil Engineering, Dept. of Civil and Environmental Engineering, Cornell Univ., Room 273 Hollister Hall, Ithaca, NY 14853. E-mail: [email protected]
T. Sakanoue [email protected]
Group Leader, Fundamental Technology Research Institute, Tokyo Gas Co., Ltd., Yokohama 230-0045, Japan. E-mail: [email protected]

Metrics & Citations

Metrics

Citations

Download citation

If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.

Cited by

View Options

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Media

Figures

Other

Tables

Share

Share

Copy the content Link

Share with email

Email a colleague

Share