Centrifuge Modeling of the Effect of Preshaking on the Liquefaction Resistance of Silty Sand Deposits
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 142, Issue 6
Abstract
Field observations suggest that preshaken natural sands in some seismic regions have high liquefaction resistance as a result of geologic aging and/or preshaking. This paper focuses on the young silty sand deposits located in the Imperial Valley of California. Recent deposition and intense seismic activity in the Valley suggest that preshaking is the main cause of their increased liquefaction resistance. The first part of the paper examines the liquefiable layer at the Wildlife site, which may have been deposited by flooding approximately between 1905–1907. The site was instrumented with accelerometers and piezometers in 2005, providing data over the last 10 years. The following conclusions are reached from this and from the catalog information on earthquakes before 2005: (1) Since 1907, the Wildlife layer has been subjected to approximately 60–70 earthquakes having at the site, which caused pore pressure buildup in the layer; (2) most of these earthquakes generated excess pore pressures but generally did not liquefy the soil (Events A); and (3) approximately 10 or 20% of all earthquakes were capable of liquefying the layer immediately after deposition (Events B). This information was used to plan a centrifuge experiment that crudely simulated the history of the Wildlife site. In this test, 66 base shakings were applied to the base of a 6-m prototype homogeneous deposit of loose saturated silty sand, with a ratio of one Event B for every 10 Events A. Events B liquefied the deposit at the beginning but not at the end of the experiment. Events A liquefied the deposit at very shallow depths at the beginning but stopped liquefying it very soon into the experiment. Finally, an Event B caused the next Event A to generate more excess pore pressures, with this effect being canceled rapidly by a couple of subsequent Events A. The lack of liquefaction by Events B after heavy preshaking in the experiment is consistent with the Wildlife layer response to the 2010, , El Mayor-Cucupah earthquake, an Event B that generated only a 19% pore pressure ratio at the site.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors wish to acknowledge the California Department of Fish and Wildlife, which provides access to the monitoring site at the Wildlife Liquefaction Array. The NEES@UCSB field site facility received support from the George E. Brown, Jr. Network for Earthquake Engineering Simulation program through CMS-0217421 and CMMI-0927178. The authors want to thank the Centrifuge staff at NEES@RPI and Dr. Mourad Zeghal. Finally, the authors also wish to acknowledge Prof. T. Leslie Youd for his useful comments on the possibility that the Wildlife site may have liquefied in 1979, and Prof. Ronald D. Andrus for an extensive discussion on the effect of aging, preshaking, and liquefaction on sand liquefaction resistance.
References
Abdoun, T., et al. (2013). “Centrifuge and large scale modeling of seismic pore pressures in sands: A cyclic strain interpretation.” J. Geotech. Geoenviron. Eng., 1215–1234.
Andrus, R. D., and Stokoe, K. H., II (2000). “Liquefaction resistance of soils from shear-wave velocity.” J. Geotech. Geoenviron. Eng., 1015–1025.
Andrus, R. D., Stokoe, K. H., II, Chung, R. M., and Juang, C. H. (2003). Guidelines for evaluating liquefaction resistance using shear wave velocity measurement and simplified procedures, U.S. Dept. of Commerce, Materials and Construction Research Division, Gaithersburg, MD.
Bennett, M. J., McLaughlin, P. V., Sarmiento, J. S., and Youd, T. L. (1984). “Geotechnical investigations of liquefaction sites, Imperial Valley, California.”, U.S. Geological Survey, Menlo Park, CA.
Bierschwale, J. G., and Stokoe, K. H., II. (1984). “Analytical evaluation of liquefaction potential of sands subjected to the 1981 Westmorland Earthquake.”, Civil Engineering Dept., Univ. of Texas, Austin, TX.
Boulanger, R. W., and Idriss, I. M. (2011). “Cyclic failure and liquefaction: Current issues. State-of-the-art lecture.” Proc., 5th Int. Conf. on Earthquake Geotechnical Engineering, Chilean Geotechnical Society, Santiago, Chile, 137–159.
Cox, B. R. (2006). “Development of direct test method for dynamically assessing the liquefaction resistance of soils in situ.” Ph.D. thesis, Univ. of Texas at Austin, Austin, TX.
Cox, B. R., et al. (2013). “Liquefaction at strong motion stations in the 2011 Great East Japan earthquake with an emphasis in Urayasu City.” Earthquake Spectra, 29(S1), S55–S8.
Dobry, R., and Abdoun, T. (2011). “An investigation into why liquefaction charts work: A necessary step toward integrating the states of art and practice.” Proc., 5th Int. Conf. on Earthquake Geotechnical Engineering, Chilean Geotechnical Society, Santiago, Chile, 13–44.
Dobry, R., Abdoun, T., Stokoe, K. H., II, Moss, R. E. S., Hatton, M., and El Ganainy, H. (2015). “Liquefaction potential of recent fills versus natural sands located in high seismicity regions using shear wave velocity.” J. Geotech. Geoenviron. Eng., 040141121.
Dobry, R., Abdoun, T., Thevanayagam, S., El-Ganainy, H., and Mercado, V. (2013). “Case histories in loose sand fills during the 1989 Loma Prieta earthquake: Comparison with large scale and centrifuge shaking tests.” Proc., 7th Int. Conf. on Case Histories in Geotechnical Engineering, S. Prakash, ed., Missouri Univ. of Science and Technology, Rolla, MO, 12.
Dobry, R., Baziar, M. H., O’Rourke, T. D., Roth, B. L, and Youd, T. L. (1992). “Liquefaction and ground failure in the Imperial Valley during the 1979, 1981 and 1987 earthquakes.” Case studies of liquefaction and lifeline performance during past earthquakes, T. D. O’Rourke and M. Hamada, eds., Vol. 2, National Center for Earthquake Engineering Research, Buffalo, NY, 4.
Dobry, R., Stokoe, K. H., II, Ladd, R. S., and Youd, T. L. (1981). “Liquefaction susceptibility from s-wave velocity.” Proc., ASCE National Convention, In Situ Tests to Evaluate Liquefaction Susceptibility, ASCE, New York.
Elgamal, A.-W., Zeghal, M., Taboada, V., and Dobry, R. (1996). “Analysis of site liquefaction and lateral spreading using centrifuge testing records.” Soils Found., 36(2), 111–121.
El-Sekelly, W., Mercado, V., Abdoun, T., Zeghal, M., and El-Ganainy, H. (2013). “Bender elements and system identification for estimation of .” Int. J. Phys. Modell. Geotech., 13(4), 111–121.
El-Sekelly, W., Tessari, A., and Abdoun, T. (2014). “Shear wave velocity measurement in the centrifuge using bender elements.” Geotech. Test. J., 37(4), 1–16.
Felzer, K. R., and Cao, T. (2008). “WGCEP historical California earthquake catalog, Appendix H in 2007 Working Group on California earthquake probabilities, the uniform California earthquake rupture forecast, version 2 (UCERF2).”, U.S. Geological Survey, Reston, VA.
Field, E. H., et al. (2013). “Uniform California earthquake rupture forecast, version 3 (UCERF3)—The time-independent model.”, U.S. Geological Survey, Reston, VA.
Finn, W. D. L., Bransby, P. L., and Pickering, D. J. (1970). “Effect of strain history on liquefaction of sand.” J. Soil Mech. Found. Div., 96(SM6), 1917–1934.
Gonzalez, M. A. (2008). “Centrifuge modeling of pile foundation response to liquefaction and lateral spreading: Study of sand permeability and compressibility effects using scaled sand techniques.” Ph.D. thesis, Dept. of Civil and Environmental Engineering, Rensselaer Polytechnic Institute, Troy, NY.
Heidari, T., and Andrus, R. D. (2012). “Liquefaction potential assessment of pleistocene beach sands near Charleston, South Carolina.” J. Geotech. Geoenviron. Eng., 1196–1208.
Holzer, T. L., and Youd, T. L. (2007). “Liquefaction, ground oscillation, and ground deformation at the wildlife array, California.” Bull. Seismol. Soc. Am., 97(3), 961–976.
Hutton, K., Woessner, J., and Hauksson, E. (2010). “Earthquake monitoring in southern California for seventy years (1932–2008).” Bull. Seismol. Soc. Am., 100(2), 423–446.
Idriss, I. M., and Boulanger, R. W. (2008). “Soil liquefaction during earthquakes.” Monograph MNO-12, Earthquake Engineering Research Institute, Oakland, CA.
Ishihara, K., Araki, K., and Bradley, B. A. (2011). “Characteristics of liquefaction-induced damage in the 2011 Great East Japan earthquake.” Proc., Int. Conf. on Geotechnics for Sustainable Development—Geotec (Keynote Lecture), Geotec, Hanoi, Vietnam, 22.
Kayen, R. R., et al. (2013). “Shear wave velocity-based probabilistic and deterministic assessment of seismic soil liquefaction potential.” J. Geotech. Geoenviron. Eng., 407–419.
Laminar Boxes. (2014). “NEES at RPI.” 〈http://www.nees.rpi.edu/equipment/laminar-boxes/〉 (Oct. 16, 2014).
NEES (Network for Earthquake Engineering Simulation). (2015). Wildlife liquefaction array, 〈http://www.nees.ucsb.edu/facilities/wla〉 (Oct. 16, 2014).
Pyke, R. (2003). “Discussion of ‘Liquefaction resistance of soils: Summary report from the 1996 NCEER and 1998 NCEER/NSF workshops on evaluation of liquefaction resistance of soils’ by Youd, T. L. et al. (2001).” J. Geotech. Geoenviron. Eng., 283–284.
Seed, H. B. (1979). “Soil liquefaction and cyclic mobility evaluation for level ground during earthquakes.” J. Geotech. Eng. Div., 105(GT2), 201–255.
Seed, H. B., and Idriss, I. M. (1971). “Simplified procedure for evaluating soil liquefaction potential.” J. Soil Mech. Found. Div., 97(SM9), 1249–1273.
Seed, H. B., Mori, K., and Chan, C. K. (1977). “Influence of seismic history on liquefaction of sands.” J. Geotech. Eng. Div., 103(GT4), 257–270.
Steidl, J. M., and Seale, S. H. (2010). “Observations and analysis of ground motions and pore pressure at the NEES instrumented geotechnical field sites.” Proc., 5th Int. Conf. on recent Advances in Geotechnical Earthquake Engineering and Symp. in Honor of Prof. I. M. Idriss, S. Prakash, ed., Missouri Univ. of Science and Technology, Rolla, MO.
Vucetic, M. (1986). “Pore pressure buildup and liquefaction at level sand sites during earthquakes.” Ph.D. thesis, Dept. of Civil Engineering, Rensselaer Polytechnic Institute, Troy, NY.
Youd, T. L., et al. (2001). “Liquefaction resistance of soils: Summary report from the 1996 NCEER and 1998 NCEER/NSF workshops on evaluation of liquefaction resistance of soils.” J. Geotech. Geoenviron. Eng., 817–833.
Youd, T. L., et al. (2003). “Closure of ‘Liquefaction resistance of soils: Summary report from the 1996 NCEER and 1998 NCEER/NSF workshops on evaluation of liquefaction resistance of soils’ by Youd, T. L. et al. (2001).” J. Geotech. Geoenviron. Eng., 284–286.
Youd, T. L. (2013). “Discussion of ‘Examination and reevaluation of SPT-based liquefaction triggering case histories’ by Ross W. Boulanger, Daniel W. Wilson, and I. M. Idriss.” J. Geotech. Geoenviron. Eng., 1998–2000.
Youd, T. L., Steidl, J. H., and Nigbor, R. L. (2004). “Ground motion, pore water pressure and SFSI monitoring at NEES permanently instrumented field sites.” Proc., 11th Int. Conf. on Soil Dynamics and Earthquake Engineering, D. Doolin, A. Kammerer, T. Nagami, R. B. Seed, and I. Towhata, eds., Vol. 2, National Univ. of Singapore, Tumasik, Singapore, 435–442.
Youd, T. L., Steidl, J. H., and Steller, R. A. (2007). “Instrumentation of the wildlife liquefaction array.” Proc., Int. Conf. on Earthquake Geotechnical Engineering, Pitilakis, K. D., ed., Springer, Netherlands.
Youd, T. L., and Wieczoreck, G. F. (1984). “Liquefaction during the 1981 and previous earthquakes near Westmorland, California.”, U.S. Geological Survey, Menlo Park, CA.
Zeghal, M., Elgamal, A.-W., Tang, H. T., and Stepp, J. C. (1995). “Lotung downhole array. II: Evaluation of soil nonlinear properties.” J. Geotech. Eng., 363–378.
Information & Authors
Information
Published In
Journal of Geotechnical and Geoenvironmental Engineering
Volume 142 • Issue 6 • June 2016
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Sep 4, 2014
Accepted: Sep 14, 2015
Published online: Feb 29, 2016
Published in print: Jun 1, 2016
Discussion open until: Jul 29, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.