Evaluation of Swell Behavior of Expansive Clays from Internal Specific Surface and Pore Size Distribution
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 142, Issue 2
Abstract
The interdependency of microsoil fabric-related properties and swell/shrink behavior of expansive soils needs to be identified to achieve a more thorough and accurate prediction of heave of expansive soils. In a recent research study, two microsize-related properties of a soil—pore size distribution and specific surface area—were identified and examined in an effort to address their synergistic effects on swelling behavior of soils. To study this aspect in detail, eight natural expansive clayey soils from known expansive soil regions were sampled and studied by using two test methods: conventional one-dimensional vertical swell tests and novel three-dimensional volumetric swell strain tests. Microinternal structural details, including pore void distribution, were obtained from mercury intrusion porosimetry (MIP) studies on compacted soil specimens. Specific surface area (SSA) details of the same soils were determined using the chemical ethylene glycol monoethyl ether (EGME) method. Attempts were made to predict macroswell properties, using both pore and surface area properties. Modeling analyses and results showed that the swelling behavior of the clays was dependent on a newly introduced parameter that accounted for both clay mineralogy constituents and internal pore distribution of the soils. The new swell property models showed accurate predictions of measured swell strains of the present soils, depicting the importance of including mineralogy and pore fabric details in a given soil.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to thank the National Science Foundation (NSF) and Program Director, Dr. Richard J. Fragaszy, for supporting this research under NSF Grant No. 1031214. Any findings, conclusions, or recommendations expressed in the present material are those of the authors and do not necessarily reflect the views of NSF.
References
Abduljauwad, S. N. (1993). “Study on the performance of calcareous expansive clay.” Bull. Assoc. Eng. Geol., 30(4), 481–498.
ASTM. (2014). “Standard test methods for one-dimensional swell or collapse of soils.” ASTM D4546, West Conshohocken, PA.
Buhler, R. L., and Cerato, A. B. (2007). “Stabilization of Oklahoma expansive soils using lime and class C fly ash.” Geo-Denver, problematic soils and rocks and in situ characterization, ASCE, Reston, VA, 1–10.
Carter, D. L., Mortland, M. M., and Kemper, W. D. (1986). “Specific surface.” Methods of soil analysis, 2nd Ed., A. Klute, ed., ASA and SSSA, Madison, WI, 413–423.
Cerato, A. B., and Lutenegger, A. J. (2002). “Determination of surface area of fine grained soils by the ethylene (EGME) method.” Geotech. Test. J., 25(3), 315–321.
Chen, F. H. (1988). Foundations on expansive soils, 2nd Ed., Elsevier Science, New York.
Chittoori, B. C. S., and Puppala, A. J. (2011). “Quantitative estimation of clay mineralogy in fine-grained soils.” J. Geotech. Geoenviron. Eng., 997–1008.
Cui, Z. D., and Tang, Y. (2011). “Microstructures of different soil layers caused by the high-rise building group in Shanghai.” Environ. Earth Sci., 63(1), 109–119.
Ferber, V., Auriol, J.-C., Cui, Y.-J., and Magnan, J.-P. (2009). “On the swelling potential of compacted high plasticity clays.” Eng. Geol., 104(3–4), 200–210.
Ferreiro, J. P., and Vazuez, E. V. (2010). “Multifractal analysis of Hg pore size distributions in soils with contrasting structural stability.” Geoderma, 160(1), 64–73.
Fredlund, D. G. (1969). “Consolidometer test procedural factors affecting swell properties.” Proc., 2nd Int. Conf. on Expansive Clay Soils, Texas A&M Univ., College Station, TX, 435–456.
Holtz, W. G., and Gibbs, H. J. (1956). “Engineering properties of expansive clays.” Trans. Am. Soc. Civ. Eng., 121, 641–663.
Jones, D. E., and Holtz, W. J. (1973). “Expansive soils: The hidden disaster.” Civ. Eng., 430(8), 49–51.
Katti, R. K., Moza, K. K., and Katti, D. R. (1984). “Unconventional behavior of expansive soils.” Proc., 16th Budapest Conf. on Soil Mechanics and Foundation Engineering, 137–146.
Lambe, T. W., and Whitman, R. V. (1969). Soil mechanics, Wiley, New York.
Likos, W. J., and Wayllace, A. (2010). “Porosity evolution of free and confined bentonites during interlayer hydration.” Clays Clay Miner., 58(3), 399–414.
Mitchell, J. K., and Soga, K. (2005). Fundamentals of soil behavior, 3rd Ed., Wiley, Hoboken, NJ.
Pedarla, A. (2013). “SWCC and clay mineralogy based models for realistic simulation of swell behavior of expansive soils.” Dept. of Civil Engineering, Univ. of Texas at Arlington, TX.
Pedarla, A., Puppala, A. J., and Hoyos, L. R. (2013). “Swelling behavior of expansive clays incorporating mineralogy and pore size distribution via SWCC.” 1st Pan Am UNSAT Conf., PanAm UNSAT, 305–308.
Punthutaecha, K., Puppala, A. J., Vanapalli, S. K., and Inyang, H. (2006). “Volume change behaviors of expansive soils stabilized with recycled ashes and fibers.” J. Mater. Civ. Eng., 295–306.
Puppala, A. J., and Cerato, A. (2009). “Heave distress problems in chemically-treated sulfate-laden materials.” GeoStrata, 10(2), 28–32.
Puppala, A. J., Katha, B., and Hoyos, L. R. (2004). “Volumetric shrinkage strain measurements in expansive soils using digital imaging technology.” Geotech. Test. J., 27(6), 547–556.
Puppala, A. J., Manosuthikij, T., and Chittoori, B. C. S. (2013). “Swell and shrinkage characterizations of unsaturated expansive clays from Texas.” Eng. Geol., 164, 187–194.
Puppala, A. J., Manosuthkij, T., Nazarian, S., and Hoyos, L. R. (2011). “Threshold moisture content and matric suction potentials in expansive clays prior to initiation of cracking in pavements.” Can. Geotech. J., 48(4), 519–531.
Rao, S. M., and Revanasiddappa, K. (2005). “Role of microfabric in matric suction of residual soils.” Eng. Geol., 80(1–2), 60–70.
Vergés, E., Tost, D., Ayala, D., Ramos, E., and Grau, S. (2011). “3D pore analysis of sedimentary rocks.” Sediment. Geol., 234(1–4), 109–115.
Washburn, E. W. (1921). “Note on a method of determining the distribution of pore sizes in a porous material.” Proc. Natl. Acad. Sci., 7(4), 115–116.
Zhou, H., Fang, Y.-G., Gu, R.-G., and Zeng, C. (2011). “Microscopic analysis of saturated soft clay in Pearl River Delta.” J. Cent. South Univ. Technol., 18(2), 504–510.
Information & Authors
Information
Published In
Journal of Geotechnical and Geoenvironmental Engineering
Volume 142 • Issue 2 • February 2016
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Jul 2, 2014
Accepted: Jul 24, 2015
Published online: Sep 10, 2015
Published in print: Feb 1, 2016
Discussion open until: Feb 10, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.