From Direct Simple Shear Test to Soil Model Development and Supported Excavation Simulation: Integrated Computational-Experimental Soil Behavior Characterization Framework
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 141, Issue 11
Abstract
A constitutive model that represents soil behavior under a wide range of loading conditions is necessary for the simulation of complex boundary value problems. However, most laboratory tests are interpreted with an assumption of uniform stresses and strains within the tested soil specimen even when the specimen is known to experience nonuniform stress-strain distribution as in the direct simple shear (DSS) test. Numerous tests are often needed to fully characterize a soil’s nonlinear and anisotropic behavior and to develop an appropriate soil model. This paper utilizes an evolutionary inverse analysis approach to extract nonuniform stresses and strains within consolidated-undrained direct simple shear () test specimens on Boston blue clay (BBC) and directly develop soil constitutive models. The extracted soil behavior is consistent with known behavior of BBC including anisotropic stress-strain response and small strain nonlinearity obtained under complex laboratory loading conditions. The developed soil models from DSS tests are applied to a deep excavation case history. The analysis results show that global responses, such as lateral wall deflections and vertical ground surface settlements, approximately match measured response. The proposed approach represents a major shift in our ability to efficiently bridge numerical modeling and laboratory testing and changes the way soil characterization and constitutive model development is approached. It is possible to use very few laboratory tests to directly develop versatile material models that can be used in the solution of geotechnical field problems without the need for complex formulations or length development processes.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study is based upon work supported in part by National Science Foundation under Grant No. CMMI 08-5632 under program director, Dr. Richard Fragaszy. Any opinions, findings, and conclusions expressed in this study are those of the writers and do not necessarily reflect the views of the National Science Foundation. The authors would like to thank Ms. Randa Asmar for her assistance in editing this paper.
References
ABAQUS. (2005). “ABAQUS/standard, a general purpose finite element code.” Pawtucket, RI.
Ahmed, I. (1989). “Investigation of normalized behavior of resedimented Boston blue clay using Geonor direct simple shear apparatus.” M.S. thesis, Massachusetts Institute of Technology, Cambridge, MA.
Budhu, M., and Britto, A. (1987). “Numerical analysis of soils in simple shear devices.” Soils Found., 27(2), 31–41.
DeGroot, D. J., Germaine, J. T., and Ladd, C. C. (1994). “Effect of nonuniform stresses on measured DSS stress-strain behavior.” J. Geotech. Geoenviron. Eng., 120(5), 892–912.
Doherty, J., and Fahey, M. (2011). “Three-dimensional finite element analysis of the direct simple shear test.” Comput. Geotech., 38(7), 917–924.
Dounias, G. T., and Potts, D. M. (1993). “Numerical analysis of drained direct and simple shear tests.” J. Geotech. Eng., 1870–1891.
Duncan, J. M., and Dunlop, P. (1969). “Behavior of soils in simple shear.” Proc., 7th Int. Conf. of Soil Mechanics and Foundation Engineering, Mexico.
Fu, Q., Hashash, Y. M. A., Jung, S., and Ghaboussi, J. (2007). “Integration of laboratory testing and constitutive modeling of soils.” Comput. Geotech., 34(5), 330–345.
Ghaboussi, J., Garrett, J. H., and Wu, X. (1991). “Knowledge-based modeling of material behavior with neural networks.” J. Eng. Mech., 132–153.
Ghaboussi, J., Pecknold, D. A., Zhang, M. F., and Haj-Ali, R. M. (1998). “Autoprogressive training of neural network constitutive models.” Int. J. Numer. Methods Eng., 42(1), 105–126.
Ghaboussi, J., and Sidarta, D. E. (1997). “New method of material modeling using neural networks.” Proc., 6th Int. Symp. on Numerical Models in Geomechanics, Taylor and Francis, Montreal, Canada, 393–400.
Hashash, Y. M. A. (1992). “Analysis of deep excavations in clay.” Ph.D. thesis, Massachusetts Institute of Technology, Cambridge, MA.
Hashash, Y. M. A., Fu, Q., Ghaboussi, J., Lade, P. V., and Saucier, C. (2009). “Inverse analysis based interpretation of sand behavior from triaxial shear tests subjected to full end restraint.” Can. Geotech. J., 46(7), 768–791.
Hashash, Y. M. A., Marulanda, C., Ghaboussi, J., and Jung, S. (2003). “Systematic update of a deep excavation model using field performance data.” Comput. Geotech., 30(6), 477–488.
Jamiolkowski, M., Ladd, C. C., Germaine, J. T., and Lancelotta, R. (1985). “New developments in field and laboratory testing of soils.” Proc., 11th Int. Conf. on Soil Mech. and Foundation Eng., A.A. Balkema, San Francisco.
Ladd, C. C., Bovee, R. B., Edgers, L., and Rixner, J. J. (1971). “Consolidated-undrained plane strain shear tests on Boston blue clay.”, U.S. Army Eng. Waterways Exp. Stn., Dept. Civil Engineering, MIT, Cambridge, MA.
Lin, L. (1989). “A concordance correlation coefficient to evaluate reproducibility.” Biometrics, 45(1), 255–268.
Marulanda, C. (2005). “Integration of numerical modeling and field observations of deep excavations.” Ph.D. thesis, Univ. of Illinois at Urbana-Champaign, Urbana, IL.
Olsen, M. B. (2001). “Measured performance of a large excavation on the MIT Campus.” Massachusetts Institute of Technology, Cambridge, MA.
Orazalin, Z. Y. (2012). “Three-dimensional finite element analysis of a complex excavation on the MIT campus.” M.S. Massachusetts Institute of Technology, Cambridge, MA.
Osman, A., and Bolton, M. (2007). “Back analysis of three case histories of braced excavations in Boston blue clay using MSD method.” Soft soil engineering, Taylor & Francis Group, London.
Roscoe, K. S. (1953). “An apparatus for the application of simple shear to soil samples.” Proc., 3rd Int. Conf. of Soil Mechanics and Foundation Engineering, London.
Saucier, C. L., and Lade, P. V. (1999). “Torsion shear tests on solid cylindrical soil specimens for neural network modeling.” 13th ASCE Engineering Mechanics Conf., Johns Hopkins Univ., Baltimore, MD.
Seah, T. H. (1990). “Anisotropy of resedimented Boston blue clay.” Sc.D. thesis, Massachusetts Institute of Technology, Cambridge, MA.
Shin, H. S., and Pande, G. N. (2000). “On self-learning finite element codes based on monitored response of structures.” Comput. Geotech., 27(3), 161–178.
Vucetic, M., and Lacasse, S. (1984). “Specimen size effect in simple shear test.” J. Geotech. Eng., 447–453.
Walbaum, M. (1988). “Procedure for investigation of sample disturbance using the direct simple shear apparatus.” Master’s thesis, Dept. of Civil Engineering, MIT, Cambridge, MA.
Whittle, A. J. (1987). “A constitutive model for overconsolidated clays with application to the cyclic loading of friction piles.” Sc.D. thesis, Massachusetts Institute of Technology, Cambridge, MA.
Whittle, A. J., and Kavvadas, M. J. (1994). “Formulation of MIT-E3 constitutive model for overconsolidated clays.” J. Geotech. Eng., 173–198.
Information & Authors
Information
Published In
Journal of Geotechnical and Geoenvironmental Engineering
Volume 141 • Issue 11 • November 2015
Copyright
© 2015 American Society of Civil Engineers.
History
Received: May 23, 2014
Accepted: Apr 14, 2015
Published online: Jun 10, 2015
Published in print: Nov 1, 2015
Discussion open until: Nov 10, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.