Modeling and Prediction of the Effects of Moisture on the Unconfined Compressive and Tensile Strength of Soils
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 141, Issue 7
Abstract
Unconfined compressive strength (UCS) and tensile strength are important geomaterial parameters that are used for performance prediction and mix design. Both UCS and tensile strength are affected by gravimetric water content and thus the characterization of their relationship with gravimetric water content is of paramount importance. The unified effective stress theory based on the suction stress enables the characterization of soils under both saturated and unsaturated conditions with one closed-form relationship. Using two types of soils, this paper provides experimental verification of this effective stress theory through indirect tensile (IDT) and UCS tests. The verification is extended to low gravimetric water contents and high matric suction levels. A new method is proposed to predict a soil’s UCS and tensile strength at specified gravimetric water contents by characterizing the soil water characteristic curve (SWCC) and conducting UCS and IDT tests at different unsaturated gravimetric water content levels, which is verified experimentally in this paper. The mechanical properties of soils are related to the material parameters (inverse of the air entry pressure for water-saturated soil) and (pore size distribution) of the SWCC.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The financial support of the research reported in this paper by the National Science Foundation (Award No. 1031188) is acknowledged.
References
ASTM. (2000). “Standard test methods for compressive strength of molded soil-cement cylinders.” D1633, West Conshohocken, PA.
Bishop, A. W. (1959). “The principle of effective stress.” Teknisk Ukeblad, 106(39), 859–863.
Craig, R. F. (1992). Soil mechanics, 5th Ed., Chapman and Hall, London.
Decagon Devices. (2000). WP4 dew point potentiameter operator’s manual version 1.3, Pullman, WA.
Fredlund, D. G., and Morgenstern, N. R. (1977). “Stress state variables for unsaturated soils.” J. Geotech. Eng. Div., 103(5), 447–466.
Heath, A. C., Pestana, J. M., Harvey, J. T., and Bejerano, M. O. (2004). “Normalizing the behavior of unsaturated granular pavement materials.” Final Rep. Prepared for the California DOT, Sacramento, CA.
Hondros, G. (1959). “Evaluation of Poisson’s ratio and the modulus of materials of a low tensile resistance by the Brazilian (indirect tensile) test with particular reference to concrete.” Aust. J. Appl. Sci., 10(3), 243–268.
Jennings, J. E. B., and Burland, J. B. (1962). “Limitation to the use of effective stresses in unsaturated soils.” Géotechnique, 12(2), 125–144.
Khalili, N., Geiser, F., and Blight, G. E. (2004). “Effective stress in unsaturated soils: Review with new evidence.” Int. J. Geomech., 115–126.
Khalili, N., and Khabbaz, M. H. (1998). “A unique relationship for the determination of the shear strength of unsaturated soils.” Géotechnique, 48(5), 681–687.
Khalili, N., and Zargarbashi, S. (2010). “Influence of hydraulic hysteresis on effective stress in unsaturated soils.” Geotechnique, 60(9), 729–734.
Khosravi, A., Ghayoomi, M., McCartney, J., and Ko, H. Y. (2010). “Impact of effective stress on the dynamic shear modulus of unsaturated sand.” Proc., GeoFlorida (CD-ROM), ASCE, Reston, VA.
Kim, T. H., and Sture, S. (2008). “Capillary-induced tensile strength in unsaturated sands.” Can. Geotech. J., 45(5), 726–737.
Lu, N., Godt, J., and Wu, D. T. (2010). “A closed-form equation for effective stress in unsaturated soil.” Water Resour. Res., 46(5), W05515.
Lu, N., and Likos, W. J. (2004). Unsaturated soil mechanics, Wiley, Hoboken, NJ.
Lu, N., and Likos, W. J. (2006). “Suction stress characteristic curve for unsaturated soils.” J. Geotech. Geoenviron. Eng., 131–142.
Muraleetharan, K. K., and Wei, C. (1999). “Dynamic behaviour of unsaturated porous media: Governing equations using the theory of mixtures with interfaces (TMI).” Int. J. Numer. Anal. Methods Geomech., 23(13), 1579–1608.
Nam, S., et al. (2009). “Comparison of testing techniques and models for establishing the SWCC of riverbank soils.” Eng. Geol., 110(1–2), 1–10.
Oh, S., Lu, N., Kim, Y. K., Lee, S. J., and Lee, S. R. (2012). “Relationship between the soil-water characteristic curve and the suction stress characteristic curve: Experimental evidence from residual soils.” J. Geotech. Geoenviron. Eng., 138(1), 47–57.
Petry, T. M., and Jiang, C. P. (2003). “Evaluation and utilization of the WP4 dew point potentiometer phase I & II.”, U.S. DOT, Washington, DC.
Roque, R., and Buttlar, W. G. (1992). “The development of a measurement and analysis system to accurately determine asphalt concrete properties using the indirect tensile mode.” Proc., Asphalt Paving Technology, Association of Asphalt Paving Technologists, St Paul, MN, 304–332.
Rowlinson, J. S., and Widom, B. (1982). Molecular theory of capillarity, Clarendon, Oxford, U.K.
Thomson, W. (1869). “On the equilibrium of vapour at a curved surface of liquid.” Philos. Mag., 42(282), 448–452.
Van Genuchten, M. T., Leij, F. J., and Yates, S. R. (1991). “The RETC code for quantifying the hydraulic functions of unsaturated soils.”, Ada, OK.
Vikas, K. S., Thakur, S. S., and Singh, D. N. (2006). “Laboratory investigations on extremely high suction measurements for fine-grained soils.” Geotech. Geol. Eng., 24(3), 565–578.
Wen, H. (2001). “Fatigue performance evaluation of WesTrack asphalt mixtures based on viscoelastic analysis of indirect tensile test.” Ph.D. thesis, North Carolina State Univ., Raleigh, NC.
Wen, H., and Kim, Y. R. (2002). “Simple performance test for fatigue cracking and validation with WesTrack mixtures.” Transp. Res. Record, 1789(1), 66–72.
Zienkiewicz, O. C., Chan, A. H. C., Pastor, M., Schrefler, B. A., and Shiomi, T. (1999). Computational geomechanics with special reference to earthquake engineering, Wiley, Chichester, U.K.
Information & Authors
Information
Published In
Journal of Geotechnical and Geoenvironmental Engineering
Volume 141 • Issue 7 • July 2015
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Jun 20, 2013
Accepted: Jan 22, 2015
Published online: Feb 27, 2015
Published in print: Jul 1, 2015
Discussion open until: Jul 27, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.