Abstract
Microbial induced calcite precipitation (MICP) is a novel biomediated ground improvement method that can be used to increase the shear strength and stiffness of soil. The evolution of the shear strength and stiffness of sand subjected to undrained and drained shearing is evaluated using triaxial tests. MICP treated sands with cementation levels ranging from young, uncemented sand to a highly cemented sandstonelike condition are subjected to undrained shear. A transition from strain hardening to strain softening behavior and a corresponding transition of global to localized failure as cementation is increased is observed. Moderately cemented specimens are subjected to various stress paths, which result in a change to the shear strength and volumetric behavior. Shear wave velocity is used to nondestructively monitor the change in small-strain stiffness during shearing, which provides an indication of cementation degradation as a function of strain level. Because shear wave velocity is influenced by both the level of cementation and the change in effective mean stress during shearing, the normalized shear modulus is used to evaluate the degradation of cementation during shearing.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Funding from the National Science Foundation (#0727463 and #0830182) is appreciated. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the writer(s) and do not necessarily reflect the views of the National Science Foundation.
References
Brandenberg, S. J., Kutter, B. L., and Wilson, D. W. (2008). “Fast stacking and phase corrections of shear wave signals in a noisy environment.” J. Geotech. Geoenviron. Eng., 1154–1165.
Chou, C. W., Seagren, E. A., Aydilek, A. H., and Lai, M. (2011). “Biocalcification of sand through ureolysis.” J. Geotech. Geoenviron. Eng., 1179–1189.
Clough, G. W., Sitar, N., and Bachus, R. C. (1981). “Cemented sands under static loading.” J. Geotech. Eng., 107(GT6), 799–817.
DeJong, J. D., et al. (2013). “Biogeochemical processes and geotechnical applications: Progress, opportunities, and challenges.” Geotechnique, 63(4), 287–301.
DeJong, J. T., et al. (2011). “Soil engineering in vivo: Harnessing natural biogeochemical systems for sustainable, multi-functional engineering solutions.” J. R. Soc. Interface, 8(54), 1–15.
DeJong, J. T., Fritzges, M. B., and Nüsslein, K. (2006). “Microbial induced cementation to control sand response to undrained shear.” J. Geotech. Geoenviron. Eng., 1381–1392.
DeJong, J. T., Mortensen, B. M., Martinez, B. C., and Nelson, D. C. (2010). “Bio-mediated soil improvement.” Ecol. Eng., 36(2), 197–210.
Fujita, Y., et al. (2008). “Stimulation of microbial urea hydrolysis in groundwater to enhance calcite precipitation.” Environ. Sci. Technol., 42(8), 3025–3032.
Ivanov, V., and Chu, J. (2008). “Applications of microorganisms to geotechnical engineering for bioclogging and biocementation of soil in situ.” Rev. Environ. Sci. Biotechnol., 7(2), 139–153.
Jang, D.-J., and Frost, J. D. (1998). “Sand structure differences resulting from specimen preparation procedures.” Geotechnical earthquake engineering and soil dynamics III, Geo-Institute of ASCE, Reston, VA, 234–245.
Karol, R. H. (2003). Chemical grouting and soil stabilization, Marcel Dekker, New York.
Martinez, B. C., et al. (2013). “Experimental optimization of microbial induced carbonate precipitation for soil improvement.” J. Geotech. Geoenviron. Eng., 587–598.
Mitchell, J. K., and Santamarina, J. C. (2005). “Biological considerations in geotechnical engineering.” J. Geotech. Geoenviron. Eng., 1222–1233.
Montoya, B. M., et al. (2012). “Fabrication, operation, and health monitoring of bender elements for aggressive environments.” Geotech. Test. J., 35(5).
Montoya, B. M., DeJong, J. T., and Boulanger, R. W. (2013). “Seismic response of liquefiable sand improved by microbial induced calcite precipitation.” Geotechnique, 63(4), 302–312.
Mortensen, B. M., Haber, M. J., DeJong, J. T., Caslake, L. F., and Nelson, D. C. (2011). “Effects of environmental factors on microbial induced calcium carbonate precipitation.” J. Appl. Microbiol., 111(2), 338–349.
NEHRP (National Earthquake Hazards Reduction Program). (2003). “Recommended provisions for seismic regulations for new buildings and other steel structures. Part 1: Provisions.” Federal Emergency Management Agency, 338.
Stocks-Fischer, S., Galinat, J. K., and Bang, S. S. (1999). “Microbiological precipitation of CaCO3.” Soil Biol. Biochem., 31(11), 1563–1571.
Stokoe, K. H., Lee, S. H. H., and Knox, D. P. (1985). “Shear moduli measurements under true triaxial stresses.” Advances in the art of testing soils under cyclic conditions, V. Khosla, ed., ASCE, Detroit, 166–185.
van Paassen, L. A., Ghose, R., van der Linden, T. J. M., van der Star, W. R. L., and van Loosdrecht, M. C. M. (2010). “Quantifying biomediated ground improvement by ureolysis: Large-scale bio-grout experiment.” J. Geotech. Geoenviron. Eng., 1721–1728.
Weil, M. H., DeJong, J. T., Martinez, B. C., and Mortensen, B. M. (2012). “Seismic and resistivity measurements for real-time monitoring of microbial induced calcite precipitation in sand.” Geotech. Test. J., 35(2), 330–341.
Whiffin, V. S., van Paassen, L. A., and Harkes, M. P. (2007). “Microbial carbonate precipitation as a soil improvement technique.” Geomicrobiol. J. 24(5), 417–423.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Jun 27, 2014
Accepted: Jan 6, 2015
Published online: Feb 10, 2015
Published in print: Jun 1, 2015
Discussion open until: Jul 10, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.