Scour Depth at Bridges: Method Including Soil Properties. I: Maximum Scour Depth Prediction
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 141, Issue 2
Abstract
Scour of the soil by flowing water around bridge supports is the number one reason for bridge collapse. Predicting the depth of the scour hole is an integral part of the bridge foundation design, as it impacts the depth of the piles. Indeed, the scour depth must be ignored in the vertical and horizontal resistance of the piles. This paper presents a method to calculate the maximum depth of the scour hole around bridge supports when subjected to a constant water velocity. Most existing methods take into account the water velocity and the geometry of the obstacle but not the soil type. The method presented in this paper keeps those important variables and adds the paramount influence of the soil erosion characteristics. It is developed on the basis of 94 flume tests, some of them very large laboratory-scale tests, as well as dimensional analysis and experience. It applies to pier scour, contraction scour, and abutment scour. The method is evaluated by comparing the maximum scour depth predictions against measured data from 10 databases of pier, contraction, and abutment scour depths.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The author acknowledges all the Ph.D. students who worked on this topic over the years. In chronological order they are Rao Gudavalli, Kiseok Kwak, Prahoro Nurtjahyo, Yiwen Cao, Ya Li, Jun Wang, Seung Jae Oh, Xingnian Chen, Anand Govindasamy, and Congpu Yao. The author also thanks the main agencies that sponsored this work over the years: the Texas DOT (John Delphia and Mark McClelland), NCHRP (Tim Hess), and his colleagues at TAMU (Hamn-Ching Chen and Kuang-An Chang).
References
Arneson, L. A., Zevenbergen, L. W., Lagasse, P. F., and Clopper, P. E. (2012). “Evaluating scour at bridges.” Publication No. FHWA-HIF-12-003-HEC18, Hydraulic Engineering Circular No. 18, 5th Ed., Federal Highway Administration, Washington, DC.
Benedict, S. T., and Caldwell, A. W. (2006). “Development and evaluation of clear-water pier and contraction scour envelope curves in the Coastal Plain and Piedmont provinces of South Carolina.” USGS Scientific Investigations Rep. 2005–5289, USGS, Reston, VA.
Briaud, J.-L. (2006). “Bridge scour.” Geotech. News, 24(3).
Briaud, J.-L. (2013). Geotechnical engineering: Unsaturated and saturated soils, Wiley, New York.
Briaud, J.-L. (2014). “Scour depth at bridges: Method including soil properties. II: Time rate of scour prediction.” J. Geotech. Geoenviron. Eng., 04014105.
Briaud, J.-L., Chen, H.-C., Li, Y., Nurtjahyo, P., and Wang, J. (2004). “Pier and contraction scour in cohesive soils.” NCHRP Rep. 516, National Cooperative Highway Research Program, Transportation Research Board, National Academy of Sciences, Washington, DC.
Briaud J.-L., Gardoni, P., and Yao, C. (2014). “Statistical, risk, and reliability analyses of bridge scour.” J. Geotech. Geoenviron. Eng., 04013011.
Briaud, J. L., Ting, F. C. K., Chen, H. C., Cao, Y., Han, S. W., and Kwak, K. W. (2001). “Erosion function apparatus for scour rate predictions.” J. Geotech. Geoenviron. Eng., 105–113.
Ettema, R., Nakato, T., and Muste, M. (2008). “Estimation of scour depth at bridge abutment.” NCHRP Rep. 24-20, Transportation Research Board, Washington, DC.
Froehlich, D. C. (1988). “Analysis of onsite measurements of scour at piers.” Proc., National Conf. on Hydraulic Engineering, S. R. Abt and J. Gessler, eds., ASCE, New York, 534–539.
Froehlich, D. C. (1989). “Local scour at bridge abutments.” Proc., National Conf. on Hydraulic Engineering, M. A. Ports, ed., ASCE, New York, 13–18.
Garde, R. J., Subramanya, K., and Nambudripad, K. D. (1961). “Study of scour around spur-dikes.” J. Hydr. Div., 87(6), 23–37.
Gill, M. A. (1972). “Erosion of sand beds around spur dikes.” J. Hydr. Div., 98(9), 1587–1602.
Gill, M. A. (1981). “Bed erosion in rectangular long contraction.” J. Hydr. Div., 107(3), 273–284.
Gudavalli, S. R. (1997). “Prediction model for scour rate around bridge piers in cohesive soils on the basis of flume tests.” Ph.D. dissertation, Zachry Dept. of Civil Engineering, Texas A&M Univ., College Station, TX.
Komura, S. (1966). “Equilibrium depth of scour in long constrictions.” J. Hydr. Div., 92(5), 17–37.
Koob, M. J., Hanson, J. M., Deming, P. W., Gould, J. P., and Edinger, P. (1987). “Collapse of the thruway bridge at Schoharie Creek.” Final Rep. by Wiss, Janney, Elstner, and Associates and Mueser Rutledge Consulting Engineers, New York State Thruway Authority, Albany, NY.
Kwak, K. (2000). “Prediction of scour depth versus time for bridge piers in cohesive soils in the case of multi-flood and layered soil systems.” Ph.D. dissertation, Zachry Dept. of Civil Engineering, Texas A&M Univ., College Station, TX.
Kwan, T. F. (1984). “Study of abutment scour.” Rep. 328, School of Engineering, Univ. of Auckland, Auckland, New Zealand.
Kwan, T. F. (1988). “A study of abutment scour.” Rep No. 451, School of Engineering, Univ. of Auckland, Auckland, New Zealand.
Li, Y. (2002). “Bridge pier scour and contraction scour in cohesive soils on the basis of flume tests.” Ph.D. dissertation, Zachry Dept. of Civil Engineering, Texas A&M Univ., College Station, TX.
Lim, S. Y. (1993). “Clear water scour in long contractions.” Proc. Inst. Civ. Eng. Water Marit. Energy, 101(9), 93–98.
Liu, H. K., Chang, F. M., and Skinner, M. M. (1961). “Effect of bridge construction on scour and backwater.” Rep. CER 60 HKL 22, Civil Engineering Section, Colorado State Univ., Fort Collins, CO.
Mueller, D. S., and Landers, M. (1996). “Channel scour at bridges in the United States.” Rep. FHWA-RD-95-184, Federal Highway Administration, McLean, VA.
Oh, S. J. (2009). “Experimental study of bridge scour in cohesive soil.” Ph.D. dissertation, Zachry Dept. of Civil Engineering, Texas A&M Univ., College Station, TX.
Richardson, E. V., Harrison, L. J., and Davis, S. R. (1991). “Evaluating scour at bridges.” Publication No. FHWA-IP-90-017, Hydraulic Engineering Circular No. 18, 1st Ed., Federal Highway Administration, Washington, DC.
Sturm, T. W. (2004). “Enhanced abutment scour studies for compound channels.” Rep. FHWA-RD-99-156, School of Civil and Environmental Engineering, Georgia Institute of Technology, Atlanta.
Tey, C. B. (1984). “Local scour at bridge abutments.” Rep. 329, School of Engineering, Univ. of Auckland, Auckland, New Zealand.
Webby, M. G. (1984). “General scour at a contraction.” RRU Bull., 73, 109–118.
Wong, W. H. (1982). “Scour at bridge abutments.” Rep. 275, School of Engineering, Univ. of Auckland, Auckland, New Zealand.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Feb 10, 2014
Accepted: Sep 19, 2014
Published online: Oct 30, 2014
Published in print: Feb 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.