Strength and Dilatancy of Silty Sand
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 140, Issue 7
Abstract
Fines content can have a great influence on the mechanical behavior of sand. The effect of fines content has not been taken into account in most of the strength-dilatancy relationships for sand. An attempt was made in this paper to account for the influence of fines content on the strength-dilatancy relationship of silty sands. The test data on Ottawa sands with nonplastic fines were reanalyzed to examine the strength and dilatancy relationship for silty sand with different fines contents. The ratio of excess angle (which is the difference between the peak friction angle and the critical state friction angle) to the relative dilatancy index was found to be a function of fines content. Furthermore, a strength-dilatancy relationship was also modified to account for the influence of confining pressure on the strength-dilatancy relationship of silt sands.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge financial support from the 111 Project (Grant No. B13024), the Program for Changjiang Scholars and Innovative Research Team in University (Grant No. IRT1125), the Project supported by the National Natural Science Foundation of China (Grant No. 51379067), and the Fundamental Research Funds for the Central Universities (Grant No. 2011B14514).
References
Been, K., Jefferies, M. G., and Hachey, J. (1991). “The critical state of sands.” Geotechnique, 41(3), 365–381.
Bolton, M. D. (1986). “The strength and dilatancy of sands.” Geotechnique, 36(1), 65–78.
Carraro, J. A. H., Bandini, P., and Salgado, R. (2003). “Liquefaction resistance of clean and nonplastic silty sands based on cone penetration resistance.” J. Geotech. Geoenviron. Eng., 965–976.
Carraro, J. A. H., Prezzi, M., and Salgado, R. (2009). “Shear strength and stiffness of sands containing plastic or nonplastic fines.” J. Geotech. Geoenviron. Eng., 1167–1178.
Chakraborty, T., and Salgado, R. (2010). “Dilatancy and shear strength of sand at low confining pressures.” J. Geotech. Geoenviron. Eng., 527–532.
Chiu, C. F., and Fu, X. J. (2008). “Interpreting undrained instability of mixed soils by equivalent intergranular state parameter.” Geotechnique, 58(9), 751–755.
Chu, J., and Leong, W. K. (2002). “Effect of fines on instability behaviour of loose sand.” Geotechnique, 52(10), 751–755.
Fukushima, S., and Tatsuoka, F. (1984). “Strength and deformation characteristics of saturated sand at extremely low pressure.” Soils Found., 24(4), 30–48.
Lee, J., Salgado, R., and Carraro, J. A. H. (2004). “Stiffness degradation and shear strength of silty sands.” Can. Geotech. J., 41(5), 831–843.
McDowell, G. R., and Bolton, M. D. (1998). “On the micromechanics of crushable aggregates.” Geotechnique, 48(5), 667–679.
Mitchell, J. K. (1993). Fundamentals of soil behavior, 2nd Ed., Wiley Interscience, New York.
Murthy, T. G., Loukidis, D., Carraro, J. A. H., Prezzi, M., and Salgado, R. (2007). “Undrained monotonic response of clean and silty sands.” Geotechnique, 57(3), 273–288.
Ni, Q., Tan, T. S., Dasari, G. R., and Hight, D. W. (2004). “Contribution of fines to the compressive strength of mixed soils.” Geotechnique, 54(9), 561–569.
Nocilla, A., Coop, M. R., and Colleselli, F. (2006). “The mechanics of an Italian silt: An example of ‘transitional’ behaviour.” Geotechnique, 56(4), 261–271.
Park, S.-S., and Kim, Y.-S. (2013). “Liquefaction resistance of sands containing plastic fines with different plasticity.” J. Geotech. Geoenviron. Eng., 825–830.
Salgado, R., Bandini, P., and Karim, A. (2000). “Shear strength and stiffness of silty sand.” J. Geotech. Geoenviron. Eng., 451–462.
Salgado, R., Boulanger, R. W., and Mitchell, J. K. (1997a). “Lateral stress effects on CPT liquefaction resistance correlations.” J. Geotech. Geoenviron. Eng., 726–735.
Salgado, R., Mitchell, J. K., and Jamiolkowski, M. (1997b). “Cavity expansion and penetration resistance in sand.” J. Geotech. Geoenviron. Eng., 344–354.
Salgado, R., Mitchell, J. K., and Jamiolkowski, M. (1998). “Calibration chamber size effects on penetration resistance in sand.” J. Geotech. Geoenviron. Eng., 878–888.
Salgado, R., and Prezzi, M. (2007). “Computation of cavity expansion pressure and penetration resistance in sands.” Int. J. Geomech., 251–265.
Salgado, R., and Randolph, M. F. (2001). “Analysis of cavity expansion in sand.” Int. J. Geomech., 175–192.
Simoni, A., and Houlsby, G. T. (2006). “The direct shear strength and dilatancy of sand-gravel mixtures.” Geotech. Geol. Eng., 24(3), 523–549.
Stamatopoulos, C. A. (2010). “An experimental study of the liquefaction strength of silty sands in terms of the state parameter.” Soil. Dyn. Earthquake Eng., 30(8), 662–678.
Thevanayagam, S., Shenthan, T., Mohan, S., and Liang, J. (2002). “Undrained fragility of clean sands, silty sands, and sandy silts.” J. Geotech. Geoenviron. Eng., 849–859.
Wood, F. M., Yamamuro, J. A., and Lade, P. V. (2008). “Effect of depositional method on the undrained response of silty sand.” Can. Geotech. J., 45(11), 1525–1537.
Yamamuro, J. A., and Lade, P. V. (1998). “Steady-state concepts and static liquefaction of silty sands.” J. Geotech. Geoenviron. Eng., 868–877.
Yang, J., and Wei, L. M. (2012). “Collapse of loose sand with the addition of fines: The role of particle shape.” Geotechnique, 62(12), 1111–1125.
Yu, H. S. (1990). “Cavity expansion theory and its application to the analysis of pressuremeters.” Ph.D. thesis, Univ. of Oxford, Oxford, U.K.
Yu, H. S. (1994). “State parameter from self-boring pressuremeter tests in sand.” J. Geotech. Engrg., 2118–2135.
Yu, H. S. (1996). “Closure to ‘State parameter from self-boring pressuremeter tests in sand’ by H. S. Yu.” J. Geotech. Engrg., 413–414.
Yu, H. S. (2000). Cavity expansion methods in geomechanics, Kluwer Academic Publishers, Dordrecht, Netherlands.
Yu, H. S. (2006). Plasticity and geotechnics, Springer, Berlin.
Yu, H. S., and Houlsby, G. T. (1991). “Finite cavity expansion in dilatant soils: Loading analysis.” Geotechnique, 41(2), 173–183.
Yu, H. S., and Houlsby, G. T. (1992). “Discussion: Finite cavity expansion in dilatant soils: Loading analysis.” Geotechnique, 42(4), 649–654.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Sep 24, 2013
Accepted: Mar 26, 2014
Published online: Apr 17, 2014
Published in print: Jul 1, 2014
Discussion open until: Sep 17, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.