Effects of Principal Stress Rotation on Resilient Behavior in Rail Track Foundations
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 140, Issue 2
Abstract
The design of a railway track substructure requires a realistic understanding of the resilient behavior of the underlying track foundation materials, namely, the subballast and subgrade layers. Currently, the best available method of characterizing the resilient behavior of track foundation materials is through the execution of cyclic triaxial tests, although these do not have the ability to impose principal stress rotation (PSR) on test specimens. A previous paper by the authors demonstrated that PSR increases the rate of permanent strain development. This paper reports on the effects of PSR on the resilient behavior of track foundation materials. Four different reconstituted soils selected to represent typical track foundation materials were subjected to undrained cyclic and torsional shear tests in a hollow-cylinder apparatus. It was established that PSR reduces the resilient modulus of the materials compared with cyclic loading without PSR. The effects of PSR as a function of clay content, overconsolidation ratio (OCR), and consolidation regime (isotropic or anisotropic) were also investigated.
Get full access to this article
View all available purchase options and get full access to this article.
References
Bishop, A. W., and Henkel, D. J. (1962). The measurement of soil properties in the triaxial test, Edward Arnold, London.
Brown, S. F. (1975). “Improved framework for predicting permanent deformation in asphalt layers.” Transportation Research Record 537, Transportation Research Board, Washington, DC, 18–30.
Brown, S. F. (1996). “Soil mechanics in pavement engineering.” Geotechnique, 46(3), 383–426.
Burrow, M. P. N., Bowness, D., and Ghataora, G. S. (2007). “A comparison of railway track foundation design methods.” Proc. Inst. Mech. Eng. F: J. Rail Rapid Transit, 221(1), 1–12.
Chan, F. W. K., and Brown, S. F. (1994). “Significance of principal stress rotation in pavements.” Proc., 13th Int. Conf. on Soil Mechanics and Foundation Engineering, International Society of Soil Mechanics and Geotechnical Engineering, London, 1823–1826.
Fredlund, D. G., Bergan, A. T., and Sauer, E. K. (1975). “Deformation characterisation of subgrade soils for highways and runways in northern environments.” Can. Geotech. J., 12(2), 213–223.
Gräbe, P. J. (2001). “Resilient and permanent deformation of railway foundations under principal stress rotation.” Ph.D. thesis, Univ. of Southampton, Southampton, U.K.
Gräbe, P. J., and Clayton, C. R. I. (2003). “Permanent deformation of railway foundations under heavy axle loading.” Proc., Int. Heavy Haul Association (IHHA), IHHA, Virginia Beach, VA, 3.25–3.32.
Gräbe, P. J., and Clayton, C. R. I. (2009). “Effects of principal stress rotation on permanent deformation in rail track foundations.” J. Geotech. Geoenviron. Eng., 555–565.
Gräbe, P. J., and Shaw, F. J. (2010). “Design life prediction of a heavy haul track foundation.” Proc. Int. Mech. Eng. F: J. Rail Rapid Transit, 224(5), 337–344.
Gräbe, P. J., Shaw, F. J., and Clayton, C. R. I. (2005). “Deformation measurement on a heavy haul track formation.” Proc., 8th Int. Heavy Haul Conf., IHHA, Virginia Beach, VA, 287–295.
Hardin, B. O., and Drnevich, V. P. (1972). “Shear modulus and damping in soils.” J. Soil Mech. and Found. Div., 98(7), 667–692.
Hicks, R. G., and Monismith, C. L. (1971). “Factors influencing the resilient response of granular materials.” Highway Research Record 345, Highway Research Board, National Academy of Sciences, Washington, DC, 15–31.
Hveem, F. N. (1955). “Pavement deflections and fatigue failures.” Highway Research Board Bulletin 114, Highway Research Board, National Academy of Sciences, Washington, DC, 43–87.
Lekarp, F., Isacsson, U., and Dawson, A. R. (2000). “State of the art. I: Resilient response of unbound aggregates.” J. Transp. Eng., 66–75.
Li, D. (1994). “Railway track granular layer thickness design based on subgrade performance under repeated loading.” Ph.D. thesis, Univ. of Massachusetts, Amherst, MA.
Li, D., and Selig, E. T. (1994). “Resilient modulus for fine-grained subgrade soils.” J. Geotech. Engrg., 939–957.
Li, D., and Selig, E. T. (1996). “Cumulative plastic deformation for fine-grained subgrade soil.” J. Geotech. Engrg., 1006–1013.
O’Reilly, M. P., and Brown, S. F. (1991). Cyclic loading of soils: From theory to design, Blackie, Glasgow, U.K., 1–18.
Seed, H. B., Chan, C. K., and Lee, C. E. (1962). “Resilience characteristics of subgrade soils and their relation to fatigue failures.” Proc., Int. Conf. on the Structural Design of Asphalt Pavements, ASCE, Reston, VA, 611–636.
Shibuya, S., et al. (1992). “Elastic deformation properties of geomaterials.” Soils Found., 32(3), 26–46.
Thom, N. H., and Dawson, A. R. (1996). “The permanent deformation of a granular material modelled using hollow cylinder testing.” Proc., European Symp. Euroflex: Flexible Pavements, A. Gomes Correia, ed., Taylor & Francis, London, 97–119.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jan 19, 2013
Accepted: Aug 7, 2013
Published online: Aug 10, 2013
Published in print: Feb 1, 2014
Discussion open until: Apr 18, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.