Soil-Strength Enhancements from Polymer-Infused Roots
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 140, Issue 2
Abstract
This research investigates the use of polymer-infused roots for soil-improvement applications. By infusing polymer through the easily accessible above-surface plant stems, polymer-infused roots can be created without subsurface excavations. Evaluation of this technique involves identifying the improvements from polymer-infused roots by measuring in situ shear strength of soil using a vane shear apparatus and by measuring the tensile strength using split-tension tests in the laboratory. Roots of Ruellia squarrosa and Artemisia annua plants were infused with a mixture of epoxy resin and polyoxyalkylamine blend hardener. Compared with noninfused roots, polymer-infused roots provided an additional 22 kPa (28%) of shear strength for elastic silt and an additional 13.1 kPa (25%) of shear strength for low-plasticity clay with a corresponding 13.6-kPa (55%) increase in tensile strength for the low-plasticity clay. Acid hydrolysis testing was performed to ascertain the potential durability of the polymer-infused roots. The 4% plant material mass loss measured for the infused samples was significantly less than the 18% plant material mass loss for the noninfused samples, demonstrating the protective effect of the polymer infusion process.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This material is based on work supported by the National Science Foundation under Grant No. CMMI-0929294.
References
ASTM. (2008). “Standard test method for field vane shear test in cohesive soil.” D2573-08, West Conshohocken, PA.
ASTM. (2011). “Standard test method for splitting tensile strength of cylindrical concrete specimens.” C496/C496M-11, West Conshohocken, PA.
Bin-Shafique, S., Rahman, K., Yaykiran, M., and Azfar, I. (2010). “The long-term performance of two fly ash stabilized fine-grained soil subbases.” Resour. Conserv. Recycl., 54(10), 666–672.
Bischetti, G. B., et al. (2007). “Root strength and root area ratio of forest species in Lombardy (Northern Italy).” Eco- and ground bio-engineering: The use of vegetation to improve slope stability, Developments in plant and soil sciences, Vol. 103, Springer, Dordrecht, Netherlands, 31–41.
Buschle-Diller, G., Fanter, C., and Loth, F. (1995). “Effect of cellulase on the pore structure of bead cellulose.” Cellulose, 2(3), 179–203.
Consoli, N. C., Vendruscolo, M. A., Fonini, A., and Rosa, F. D. (2009). “Fiber reinforcement effects on sand considering a wide cementation range.” Geotext. Geomembr., 27(3), 196–203.
Couper, J. R., Pnenney, W. R., Fair, J. R., and Walas, S. M. (2010). Chemical process equipment: Selection and design, 2nd Ed., Butterworth-Heinemann, Oxford, U.K.
Cui, Z. F., and Muralidhara, H. S. (2010). Membrane technology: A practical guide to membrane technology and applications in food and bioprocessing, Butterworth-Heinemann, Oxford, U.K.
Das, B. M. (2008). Soil mechanics laboratory manual, Oxford University Press, New York.
Das, B. M. (2010). Principles of geotechnical engineering, 7th Ed., Cengage Learning, Stamford, CT.
De Baets, S., Poesen, J., Reubens, B., Wemans, K., De Baerdemaeker, J., and Muys, B. (2008). “Root tensile strength and root distribution of typical Mediterranean plant species and their contribution to soil shear strength.” Plant Soil, 305(1–2), 207–226.
Dupuy, L., Fourcaud, T., and Stokes, A. (2007). “A numerical investigation into the influence of soil type and root architecture on tree anchorage.” Eco- and ground bio-engineering: The use of vegetation to improve slope stability, Developments in plant and soil sciences, Vol. 103, Springer, Dordrecht, Netherlands, 175–189.
Eisenacher, K. W. (2011). “Enhancement of plant roots through polymer infusions for use in soil stabilization.” Master’s thesis, Univ. of Texas, San Antonio.
Eisenacher, K. W., Johnson, D. W., Appleford, M., and Sponsel, V. M. (2013). “Strength enhancement of plant roots through polymer infusions.” J. Compos. Mater., 47(11), 1313–1326.
Fan, C., and Su, C. (2009). “Effect of soil moisture content on the deformation behaviour of root-reinforced soils subjected to shear.” Plant Soil, 324(1–2), 57–69.
Gray, D. H., and Barker, D. (2004). “Root-soil mechanics and interactions.” Riparian vegetation and fluvial geomorphology, water science and application, Vol. 8, S. J. Bennett and A. Simon, eds., American Geophysical Union, Washington, DC, 113–123.
Gray, D. H., and Sotir, R. B. (1996). Biotechnical and soil bioengineering slope stabilization: A practical guide for erosion control, Wiley, New York.
Greenwood, J. R. (2007). “SLIP4EX—A program for routine slope stability analysis to include the effects of vegetation, reinforcement and hydrological changes.” Eco- and ground bio-engineering: The use of vegetation to improve slope stability, Developments in plant and soil sciences, Vol. 103, Springer, Dordrecht, Netherlands, 193–202.
Izawa, J., Ito, H., Saito, T., Ueno, M., and Kwano, J. (2009). “Development of rational seismic design method for geogrid-reinforced soil wall combined with fibre-mixed soil-cement and its applications.” Geosynthet. Int., 16(4), 286–300.
Kaniraj, S., and Havanagi, V. (2001). “Behavior of cement-stabilized fiber-reinforced fly ash-soil mixtures.” J. Geotech. Geoenviron. Eng., 574–584.
Kim, Y. J., Hossain, M., and Yoshitake, I. (2012). “Cold region durability of a two-part epoxy adhesive in double-lap shear joints: Experiment and model development.” Construct. Build. Mater., 36, 295–304.
Lowrey, K. W. (1974). “The use of epoxy resins in civil engineering.” Anti-corrosion Methods Mater., 21(4), 19–20.
Mickovski, S. B., Hallett, P. D., Bransby, M. F., Davies, M. C. R., Sonnenberg, R., and Bengough, A. G. (2009). “Mechanical reinforcement of soil by willow roots: Impacts of root properties and root failure mechanism.” Soil Sci. Soc. Am. J., 73(4), 1276–1285.
Pollen, N. (2007). “Temporal and spatial variability in root reinforcement of streambanks: Accounting for soil shear strength and moisture.” Catena, 69(3), 197–205.
Rasmussen, M. L., Shrestha, P., Khanal, S. K., Pometto Iii, A. L., and van Leeuwen, J. (2010). “Sequential saccharification of corn fiber and ethanol production by the brown rot fungus Gloeophyllum trabeum.” Bioresour. Technol., 101(10), 3526–3533.
Sakamoto, H., Shoji, S., and Kaneko, H. (2007). “Leaching characteristics of bisphenol A from epoxy-resin pavement materials.” Toxicol. Environ. Chem., 89(2), 191–203.
Sauceda, M. (2012). “Soil stabilization enhancements by polymer infused roots.” Master’s thesis, Univ. of Texas, San Antonio.
Schwarz, M., Preti, F., Giadrossich, F., Lehmann, P., and Or, D. (2010). “Quantifying the role of vegetation in slope stability: A case study in Tuscany (Italy).” Ecol. Eng., 36(3), 285–291.
Sherwood, P. T. (1993). Soil stabilization with cement and lime, Stationery Office Books, London.
Sobhan, K., and Mashnad, M. (2002). “Tensile strength and toughness of soil–cement–fly-ash composite reinforced with recycled high-density polyethylene strips.” J. Mater. Civ. Eng., 177–184.
Steudle, E., Murrmann, M., and Peterson, C. A. (1993). “Transport of water and solutes across maize roots modified by puncturing the endodermis (further evidence for the composite transport model of the root).” Plant Physiol., 103(2), 335–349.
Steudle, E., Oren, R., and Schulze, E.-D. (1987). “Water transport in maize roots: Measurement of hydraulic conductivity, solute permeability, and of reflection coefficients of excised roots using the root pressure probe.” Plant Physiol., 84(4), 1220–1232.
Taiz, L., and Zeiger, E. (2006). Plant physiology, Sinauer Associates, Sunderland, MA.
Tang, C. S., Shi, B., and Zhao, L. Z. (2010). “Interfacial shear strength of fiber reinforced soil.” J. Geotext. Geomembr., 28(1), 54–62.
Tengbeh, G. T. (1993). “The effect of grass roots on shear strength variations with moisture content.” Soil Technol., 6(3), 287–295.
Thomas, R. E., and Pollen-Bankhead, N. (2010). “Modeling root-reinforcementwith a fiber-bundle model and Monte Carlo simulation.” Ecol. Eng., 36(1), 47–61.
Wells, G. (2002). “Biotechnical streambank protection: The use of plants to stabilize streambanks.” Agroforestry Notes, Paper 23, USDA Forest Service–National Agroforestry Center, Lincoln, NE.
Wu, T. H., Mckinnell, W. P., and Swanston, D. N. (1979). “Strength of tree roots and landslides on Prince of Wales Island, Alaska.” Can. Geotech. J., 16(1), 19–33.
Yan, Z. X., Yan, C. M., and Wang, H. Y. (2010). “Mechanical interaction between roots and soil mass in slope vegetation.” Sci. China Technol. Sci., 53(11), 3039–3044.
Zhang, C., Chen, L., Liu, Y., Ji, X., and Liu, X. (2010). “Triaxial compression test of soil–root composites to evaluate influence of roots on soil shear strength.” Ecol. Eng., 36(1), 19–26.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Nov 30, 2012
Accepted: Jul 8, 2013
Published online: Jul 10, 2013
Published in print: Feb 1, 2014
Discussion open until: Apr 13, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.