Electrokinetic Delivery and Activation of Persulfate for Oxidation of PCBs in Clayey Soils
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 139, Issue 1
Abstract
Contamination of soils by polychlorobiphenyls (PCBs) is of environmental concern because of their toxicity, persistence, hydrophobic nature, and slow biodegradation potential. Among the PCB remedial technologies, direct oxidation by persulfate is considered to have great potential to be both simple and rapid. However, to produce faster reaction rates, persulfate is often activated using heat, metal chelates, hydrogen peroxide, or high pH. Furthermore, delivery of persulfate in low permeability clayey soils is difficult. Integrating electrokinetic remediation with persulfate has the potential to overcome such difficulties because the applied electric potential can facilitate the delivery of persulfate in low permeability soils as well as activate oxidizing radicals and simultaneously induce oxidative/reductive reactions directly in the soil. This study investigates the potential for in situ oxidation of PCBs in low permeability soils using persulfate as an oxidant and also evaluates the benefits of integrating oxidation with electrokinetic remediation. Several series of laboratory batch and bench-scale electrokinetic experiments were conducted using kaolin, a representative clayey soil, spiked with 50 mg/kg of 2,2′,3,5′ tetrachlorobiphenyl (PCB 44), a representative PCB. Persulfate oxidation activators [elevated temperature (45°C) and high pH (at the cathode)] were investigated to maximize the PCB degradation. In addition, the effect of oxidant dosage on PCB degradation was investigated. The electrokinetically enhanced temperature-only activated persulfate oxidation test resulted in better PCB 44 remediation (77.9%) than the temperature and high-pH activated persulfate oxidation (76.2%) in a 7-day period. The optimal dosage for effective remediation was 30% Na-persulfate (76.2%) because a 20% concentration of the oxidant yielded a lower rate of degradation (55.2%) of PCB 44. The results are encouraging for the use of electrokinetically enhanced persulfate oxidation for the effective remediation of PCBs in soils.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The assistance of Claudio Cameselle and Amid Khodadoust is gratefully acknowledged. The Scientific and Technological Research Council of Turkey (TUBITAK) awarded a fellowship to Yeliz Yukselen-Aksoy, which made it possible to conduct this research at the University of Illinois at Chicago.
References
Acar, Y. B., et al. (1995). “Electrokinetic remediation: Basis and technology status.” J. Hazard. Mater., 40(2), 117–137.
ASTM. (2007a). “Standard practice for classification of soils for engineering purposes.” D2487-11, West Conshohocken, PA.
ASTM. (2007b). “Standard test methods for specific gravity of soil solids by water pycnometer.” D854-10, West Conshohocken, PA.
ASTM. (2007c). “Standard test methods for measurement of hydraulic conductivity of saturated porous materials using a fexible wall permeameter.” D5084-10, West Conshohocken, PA.
ASTM. (2007d). “Standard test methods for moisture, ash, and organic matter of peat and other organic soils.” D2974-07, West Conshohocken, PA.
ASTM. (2007e). “Standard test methods for measuring the exchange complex and cation exchange capacity of inorganic fine-grained soils.” D7503-10, West Conshohocken, PA.
ASTM. (2007f). “Standard test method for pH of soils.” D4972-01, West Conshohocken, PA.
ASTM. (2007g). “Standard test methods for laboratory determination of water (moisture) content of soil and rock by mass.” D2216-10, West Conshohocken, PA.
ASTM. (2007h). “Standard test method for particle size analysis of soils.” D422-63, West Conshohocken, PA.
Barbash, A. M., Hoag, G. E., and Nadim, F. (2006). “Oxidation and removal of 1,2,4-trichlorobenzene using sodium persulfate in a sorption-desorption experiment.” Water, Air, Soil Pollut., 172(1–4), 67–80.
Block, P. A. Brown, R. A., and Robinson, D. (2004). “Novel action technologies for sodium persulfate in situ chemical oxidation.” Proc., 4th Int. Conf. on the Remediation of Chlorinated and Recalcitrant Compounds, FMC, Philadelphia, PA.
Cao, J., Zhang, W. X., Brown, D. G., and Sethi, D. (2008). “Oxidation of lindane with Fe (II)-activated sodium persulfate.” Environ. Eng. Sci., 25(2), 221–228.
Crimi, M. L., and Taylor, J. (2007). “Experimental evaluation of catalyzed hydrogen peroxide and sodium persulfate for destruction of BTEX contaminants.” Soil Sediment Contam., 16(1), 29–45.
Cuypers, C., Grotenhuis, T., Joziasse, J., and Rulkens, W. (2000). “Rapid persulfate oxidation predicts PAH bioavailability in soil and sediments.” Environ. Sci. Technol., 34(10), 2057–2063.
Dahmani, M., Huang, K., and Hoag, G. (2006). “Sodium persulfate oxidation for the remediation of chlorinated solvents (USEPA superfund innovative technology evaluation program).” Water, Air, Soil Pollut.: Focus, 6(1–2), 127–141.
Dávila, B., Whitford, K. W., and Saylor, E. S. (1993). “Technology alternatives for the remediation of PCB-contaminated soil and sediment.” Rep. No. EPA/540/S-93/506, U.S. Environmental Protection Agency, Washington, DC, 1–25.
Eykholt, G. R. (1992). “Driving and complicating features of the electrokinetic treatment of contaminated soils.” Ph.D. dissertation, Univ. of Texas–Austin, Austin, TX.
Ferrarese, E., Andreottola, G., and Oprea, I. A. (2008). “Remediation of PAH-contaminated sediments by chemical oxidation.” J. Hazard. Mater., 152(1), 128–139.
Huang, K. C., Couttenye, R. A., and Hoag, G. E. (2002). “Kinetics of heat-assisted persulfate oxidation of methyl tert-butyl ether (MTBE).” Chemosphere, 49(4), 413–420.
Huang, K. C., Zhao, Z., Hoag, G. E., Dahmani, A., and Block, P. A. (2005). “Degradation of volatile organic compounds with thermally activated persulfate oxidation.” Chemosphere, 61(4), 551–560.
Isosaari, P., et al. (2007). “Integration of electrokinetics and chemical oxidation for the remediation of creosote-contaminated clay.” J. Hazard. Mater., 144(1–2), 538–548.
Johnson, R. L., Tratnyek, P. G., and Johnson, R. O. (2008). “Persulfate persistence under thermal activation conditions.” Environ. Sci. Technol., 42(24), 9350–9356.
Liang, C., and Bruell, C. J. (2008). “Thermally activated persulfate oxidation of trichloroethylene. Experimental investigation of reaction orders.” Ind. Eng. Chem. Res., 47(9), 2912–2918.
Mitchell, J. K. (1993). Fundamentals of soil behavior, Wiley, New York.
Rastogi, A., Al-Abed, S. R., and Dionysiou, D. D. (2009). “Sulfate radical-based ferrous-peroxymonosulfate oxidative system for PCBs degradation in aqueous and sediment systems.” Appl. Catal., B, 85(3–4), 171–179.
Reddy, K. R., and Cameselle, C. (2009). Electrochemical remediation technologies for polluted soils, sediments and groundwater, Wiley, Hoboken, NJ.
Rivas, F. J. (2006). “Polycylic aromatic hydrocarbons sorbed on soils: A short review of chemical oxidation based treatments.” J. Hazard. Mater., 138(2), 234–251.
Saichek, R. E., and Reddy, K. R. (2005). “Electrokinetically enhanced remediation of hydrophobic organic compounds in soils: A review.” Crit. Rev. Environ. Sci. Technol., 35(2), 115–192.
U.S. Environmental Protection Agency (USEPA). (1987). “National air toxics information report qualitative and quantitative carcinogenic risk assessment.” Rep. No. EPA 450/5-87-003, State and Territorial Air Pollution Program Administrators/Association of Local Air Pollution Control Officers/USEPA, Washington, DC, 1–6.
U.S. Environmental Protection Agency (USEPA). (1998). “Contaminated sediment management strategy.” Rep. No. EPA-823-R-97-001, USEPA, Washington, DC.
U.S. Environmental Protection Agency (USEPA). (2001). “Road map to understanding innovative technology options for brownfields investigation and cleanup.” Rep. No. EPA 542-B-01-001, USEPA, Washington, DC.
U.S. Environmental Protection Agency (USEPA). (2007). “Test methods for evaluating solid wastes, physical/chemical methods.” Rep. No. SW 846, USEPA, Washington, DC.
Waldemer, R. H., Tratnyek, P. G., Johnson, R. L., and Nurmi, J. T. (2007). “Oxidation of chlorinated ethenes by heat-activated persulfate: Kinetics and products.” Environ. Sci. Technol., 41(3), 1010–1015.
Watts, R. J., Finn, D. D., Cutler, L. M., Schmidt, J. T., and Teel, A. L. (2007). “Enhanced stability of hydrogen peroxide in the presence of subsurface solids.” J. Contam. Hydrol., 91(3–4), 312–326.
Yao, Z., Jiang, G., Cai, Y., Xu, H., and Ma, Y. (2003). “Status of persistent organic pollutants and heavy metals in surface water of Arctic region.” Chin. Sci. Bull., 48(2), 131–135.
Yukselen, Y., and Kaya, A. (2003). “Zeta potential of kaolinite in the presence of alkali, alkaline earth and hydrolysable metal ions.” Water, Air, Soil Pollut., 145(1–4), 155–168.
Yukselen-Aksoy, Y., Khodadoust, A. P., and Reddy, K. R. (2010). “Destruction of PCB 44 in spiked subsurface soils using activated persulfate oxidation.” Water, Air, Soil Pollut., 209(1–4), 419–427.
Information & Authors
Information
Published In
Journal of Geotechnical and Geoenvironmental Engineering
Volume 139 • Issue 1 • January 2013
Pages: 175 - 184
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Dec 1, 2010
Accepted: Apr 11, 2012
Published online: May 25, 2012
Published in print: Jan 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.