Reliability-Based Design for Basal Heave Stability of Deep Excavations in Spatially Varying Soils
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 138, Issue 5
Abstract
Spatial variability of soil undrained shear strength is usually not rigorously considered in the design of basal heave for deep excavations. In this study, the slip circle method is employed to investigate how the required safety-factor against basal heave was affected by spatial variability in the context of reliability-based design. The nonstationary random field model is adopted to model spatial variability of undrained shear strength. Results show that the required safety-factor obtained with the consideration of spatial variability is much smaller than that without the consideration. Parametric studies show that the vertical scale of fluctuation has a significant influence on the required safety-factor: the longer the scale of fluctuation, the larger the required safety-factor. For target failure probabilities of 0.01 and 0.001, the corresponding required safety factors are in the ranges of 1.4–1.9 and 1.6–2.4, respectively, for the average value of vertical scale of fluctuation of 2.5 m. Design charts are provided for the ease of implementation, and an example of reliability-based design for basal stability is given for demonstration.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Association of State Highway and Transportation Officials (AASHTO). (1994). AASHTO LRFD Bridge specifications (SI unit), First Ed, AASHTO, Washington, DC.
Akbas, S. O., and Kulhawy, F. H. (2009). “Reliability-based design approach for differential settlement of footings on cohesionless soils.” J. Geotech. Geoenviron. Eng.JGGEFK, 135(12), 1779–1788.
Bjerrum, L., and Eide, O. (1956). “Stability of strutted excavations in clay.” GeotechniqueGTNQA8, 6(1), 32–47.
Ching, J. (2009). “Equivalence between reliability and factor of safety.” Prob. Eng. Mech.PEMEEX, 24(2), 159–171.
Cho, S. E. (2007). “Effect of spatial variability of soil properties on slope stability.” Eng. Geol.EGGOAO, 92(3–4), 97–109.
Eurocode7. (1993). Geotechnical design, general rules, European Committee for Standardization. Danish Geotechnical Institute, Copenhagen.
Fenton, G. A., and Griffiths, D. V. (2002). “Probabilistic foundation settlement on a spatially random soil.” J. Geotech. Geoenviron. Eng.JGGEFK, 128(5), 381–390.
Fenton, G. A., and Griffiths, D. V. (2003). “Bearing capacity prediction of spatially c- soils.” Can. Geotech. J., 40(1), 54–65.CGJOAH
Fenton, G. A., and Vanmarcke, E. H. (1990). “Simulation of random fields via local average subdivision.” J. Eng. Mech., 116(8), 1733–1749.
Goh, A. T. C., Kulhawy, F. H., and Wong, K. S. (2008). “Reliability assessment of basal-heave stability for braced excavations in clay.” J. Geotech. Geoenviron. Eng.JGGEFK, 134(2), 145–153.
Griffiths, D. V., and Fenton, G. A. (2004). “Probabilistic slope stability analysis by finite elements.” J. Geotech. Geoenviron. Eng.JGGEFK, 130(5), 507–518.
Griffiths, D. V., Huang, J., and Fenton, G. A. (2009). “Influence of spatial variability on slope reliability using 2-D random fields.” J. Geotech. Geoenviron. Eng.JGGEFK, 135(10), 1367–1378.
Haldar, S., and Babu, G. L. S. (2008) “Effect of soil spatial variability on the response of laterally loaded pile in undrained clay.” Comput. Geotech.CGEOEU, 35(4), 537–547.
Hsieh, P. G., Ou, C. Y., and Liu, H. T. (2008) “Basal heave analysis of excavations with consideration of anisotropic undrained strength of clay.” Can. Geotech. J.CGJOAH, 45(6), 788–799.
Japanese Society of Architechture (JSA). (1988). Guidelines of design and construction of deep excavation, Japanese Society of Architecture, Tokyo, Japan.
Ladd, C. C., and Foott, R. (1974). “New design procedure for stability of soft clays.” J. Geotech. Engrg. Div., 100(GT7), 763–786.
Mesri, G., and Huvaj, N. (2007). “Shear strength mobilized in undrained failure of soft clay and silt deposits.” Proc., GEO-DENVER 2007, ASCE, Reston, VA.
Phoon, K. K. (1995). “Reliability-based design of foundations for transmission line structures.” Ph.D. dissertation, Cornell Univ., Cornell, NY.
Popescu, R., Deodatis, G., and Nobahar, A. (2005). “Effect of random heterogeneity of soil properties on bearing capacity.” Prob. Eng. Mech.PEMEEX, 20(4), 324–341.
Terzaghi, K. (1943). Theoretical soil mechanics, Wiley, New York.
Taiwan Geotechnical Society (TGS). (2001). Design specifications for the foundation of buildings, Taiwan Geotechnical Society, Taipei, Taiwan.
Vanmarcke, E. H. (1977). “Probabilistic modeling of soil profiles.” J. Geotech. Engrg. Div., 103(11), 1227–1246.
Information & Authors
Information
Published In
Copyright
© 2012. American Society of Civil Engineers.
History
Received: Jul 7, 2009
Accepted: Aug 26, 2011
Published online: Aug 30, 2011
Published in print: May 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.