Minimum Embedded Length of Cyclic Horizontally Loaded Monopiles
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 138, Issue 3
Abstract
Monopiles are used as foundation structures for offshore wind energy towers. To ensure stable behavior of the monopile under cyclic loading conditions, a minimum embedded length is usually required. For this, different design criteria are used, some of which result in very large embedded depths for large-diameter monopiles. The suitability of these criteria is tested by means of numerical simulations. To account for cyclic loading, a new approach called the stiffness degradation method is applied. The results of a parametric study show that the design criteria used can indeed ensure optimum pile performance under static and cyclic loads. It is recommended that the requirement of a critical pile length, which leads to the minimum pile deflection under extreme load, is used as a design criterion. For the cases considered, this requirement results in only slightly greater cyclic deformations compared to the optimum case of very long piles. A further optimization of the required monopile length with respect to cyclic loading is possible, but requires specific consideration of cyclic behavior, as is done in this paper.
Get full access to this article
View all available purchase options and get full access to this article.
References
ABAQUS. (2009). user’s manual, version 6.8 simulia, Dassault Systèmes Simulia Corp., Providence, RI.
Abdel-Rahman, K., and Achmus, M. (2005). “Finite element modelling of horizontally loaded monopile foundations for offshore wind energy converters in germany.” International Symposium on Frontiers in Offshore Geotechnics (ISFOG), Perth, Australia, Taylor & Francis, London, 309–396.
Achmus, M., Abdel-Rahman, K., and Kuo, Y.-S. (2007). “Numerical modelling of large diameter steel piles under monotonic and cyclic horizontal loading.” Tenth International Symposium on Numerical Models in Geomechanics, Taylor & Francis, London, 453–459.
Achmus, M., Abdel-Rahman, K., and Kuo, Y-S. (2008). “Design of monopile foundations for offshore wind energy plants.” 11th Baltic Geotechnical Conference—Geotechnics in Maritime Engineering, 1, Polish Committee on Geotechnics and Gdansk Univ. of Technology, Gdansk, Poland, 463–470.
Achmus, M., Kuo, Y-S., and Abdel-Rahman, K (2009). “Behavior of monopile foundations under cyclic lateral load.” Comput. Geotech., 36(5), 725–735.
American Petroleum Institute (API). (2000). “Recommended practice for planning, designing and constructing fixed offshore platforms—Working stress design.” API Recommended Practice 2A-WSD (RP2A-WSD), 21st Ed., Washington, DC.
Det Norske Veritas (DNV). (2009). “Offshore standard DNV-OS-J101 design of offshore windturbine structures.” Version October 2007, amended November 2009, Hoevik, Norway.
Faber, T., and Klose, M. (2006). “Experiences with certification of offshore wind farms.” Proc. of the Sixteenth International Offshore and Polar Engineering Conference, International Society of Offshore and Polar Engineers, Cupertino, CA, 375–382.
Franke, E. (1997). “Pfähle.” Grundbau-Taschenbuch, 5th Ed., U. Smoltczyk, ed., Ernst & Sohn, Berlin (in German).
Germanischer Lloyd (GL). (2005). Guideline for the certification of offshore wind turbines, Hamburg, Germany.
Hettler, A. (1981). “Verschiebungen starrer und elastischer Gründungskörper in Sand bei monotoner und zyklischer Belastung.” Ph.D. thesis, Department of Civil Engineering, Geo- and Environmental Sciences, Institute of Soil Mechanics and Rock Mechanics, University of Karlsruhe, Germany.
Huurman, M. (1996). “Development of traffic induced permanent strain in concrete block pavements.” Heron, 41(1), 29–52, http://heron.tudelft.nl/archive.html.
Kuo, Y.-S. (2008). “On the behavior of large-diameter piles under cyclic lateral load.” Ph.D. thesis, Institute of Soil Mechanics, Foundation Engineering and Waterpower Engineering, Leibniz University, Hannover, 65.
Little, R. L., and Briaud, J. L. (1988). “Full scale cyclic lateral load tests on six single piles in sand.” Miscellaneous paper GL-88-27, Geotechnical Division, TX A&M University, TX.
Long, J. H., and Vanneste, G. (1994). “Effects of cyclic lateral loads on piles in sand.” J. Geotech. Engrg., 120(1), 225–244.
Randolph, M. F. (1981). “The response of flexible piles to lateral loading.” Géotechnique, 31(2), 247–259.
Titze, E. (1970). “Über den seitlichen Bodenwiderstand bei Pfahlgründungen.” Bauingenieur-Praxis, 77, Ernst & Sohn, Berlin (in German).
Information & Authors
Information
Published In
Journal of Geotechnical and Geoenvironmental Engineering
Volume 138 • Issue 3 • March 2012
Pages: 357 - 363
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Sep 13, 2009
Accepted: Jul 21, 2011
Published online: Jul 22, 2011
Published in print: Mar 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.