Instability of Loose Sand under Drained Conditions
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 138, Issue 2
Abstract
A type of prefailure instability which occurs under fully drained conditions is studied in this paper. It is observed experimentally that when a specimen is sheared along a drained stress path involving a decrease in effective mean stress, it becomes unstable after the stress path crosses an instability line. The instability occurring under drained conditions is different from the type observed under undrained conditions. The differences and similarities between the two types of instability are elaborated. The practical implication of the study in analyzing the failure mechanisms of granular soil slope is also discussed.
Get full access to this article
View all available purchase options and get full access to this article.
References
Anderson, S. A., and Riemer, M. F. (1995). “Collapse of saturated soil due to reduction in confinement.” J. Geotech. Eng., 121(2), 216–219.
Andrade, J. E. (2009). “A predictive framework for liquefaction instability.” Géotechnique, 59(8), 673–682.
Been, K., and Jefferies, M. G. (1985). “A state parameter for sand.” Géotechnique, 35(2), 99–112.
Bishop, A. W. (1973). “The stability of tips and spoil heaps.” Q. J. Eng. Geol. Hydrogeol., 6(3&4), 335–376.
Brand, E. W. (1981). “Some thoughts on rain-induced slope failures.” Proc., 10th Int. Conf. on Soil Mechanics and Foundation Engineering, 3, Balkema, Rotterdam, The Netherlands, 373–376.
Chu, J. (1991). “Liquefaction of sands under undrained and non-undrained conditions.” Proc., 5th Int. Conf. on Soil Dynamics and Earthquake Engineering, Computational Mechanics, Karlsruhe, Germany, 277–291.
Chu, J. (1995). “An experimental examination of the critical state and other similar concepts for granular soils.” Can. Geotech. J., 32(6), 1065–1075.
Chu, J., and Leong, W. K. (2001). “Pre-failure strain softening and pre-failure instability of sand: A comparative study.” Géotechnique, 51(4), 311–321.
Chu, J., Leroueil, S., and Leong, W. K. (2003). “Unstable behaviour of sand and its implication for slope stability.” Can. Geotech. J., 40(5), 873–885.
Chu, J., Lo, S-C. R., and Lee, I. K. (1993). “Instability of granular soils under strain path testing.” J. Geotech. Eng., 119(5), 874–892.
Chu, J., and Wanatowski, D. (2009). “Effect of loading mode on strain softening and instability behavior of sand in plane-strain tests.” J. Geotech. Geoenviron. Eng., 135(1), 108–120.
Daouadji, A., AlGali, H., Darve, F., and Zeghloul, A. (2010). “Instability of granular materials: Experimental evidence of diffuse mode of failure for loose sands.” J. Eng. Mech., 136(5), 575–588.
Darve, F., and Laouafa, F. (2000). “Instabilities in granular materials and applications to landslides.” Mech. Cohes.-Frict. Mater, 5(8), 627–652.
Darve, F., Servant, G., Laouafa, F., and Khoa, H. D. V. (2004). “Failure in geomaterials: Continuous and discrete analyses.” Comput. Methods Appl. Mech. Eng., 193(27–29), 3057–3085.
Darve, F., Sibille, L., Daouadji, A., and Nicot, F. (2007). “Bifurcations in granular media: Macro- and micro-mechanics approaches.” C. R. Mécanique, 335(9–10), 496–515.
di Prisco, C., and Imposimato, S. (1997). “Experimental analysis and theoretical interpretation of triaxial load controlled loose sand specimen collapses.” Mech. Cohes.-Frict. Mater, 2(2), 93–120.
Drucker, D. C. (1959). “A definition of stable inelastic material.” J. Appl. Mech., 26(3), 101–106.
Drucker, D. C., and Seereeram, D. (1987). “Remaining at yield during unloading and other unconventional elastic-plastic response.” J. Appl. Mech., 54(1), 22–26.
Eckersley, J. D. (1990). “Instrumented laboratory flowslides.” Géotechnique, 40(3), 489–502.
Gajo, A., Piffer, L., and de Polo, F. (2000). “Analysis of certain factors affecting the unstable behaviour of saturated loose sand.” Mech. Cohes.-Frict. Mater, 5(3), 215–237.
Hight, D. W. (1998). “Anisotropy in soils—Its measurement and practical implications.” 2nd GRC Lecture, Nanyang Technological Univ., Singapore.
Hight, D. W., Georgiannou, V. N., Martin, P. L., and Mundegar, A. K. (1999). “Flow slides in micaceous sands.” Problematic soils, E. Yanagisawa, N. Moroto and T. Mitachi, eds., Balkema, Rotterdam, The Netherlands, 945–958.
Hill, R. (1958). “A general theory of uniqueness and stability in elastic-plastic solids.” J. Mech. Phys. Solids, 6(3), 236–249.
Imam, S. M. R., Morgenstern, N. R., Robertson, P. K., and Chan, D. H. (2002). “Yielding and flow liquefaction of loose sand.” Soils Found., 42(3), 19–31.
Jefferies, M. G. (1993). “Nor-sand—A simple critical state model for sand.” Géotechnique, 43(1), 91–103.
Jefferies, M. G. (1997). “Plastic work and isotropic softening in unloading.” Géotechnique, 47(5), 1037–1042.
Kraft, L. M., Gavin, T. M., and Bruton, J. C. (1992). “Submarine flow slide in puget sound.” J. Geotech. Eng., 118(10), 1577–1591.
Lade, P. V. (1992). “Static instability and liquefaction of lose fine sandy slopes.” J. Geotech. Eng., 118(1), 51–72.
Lade, P. V., Nelson, R. B., and Ito, Y. M. (1987). “Nonassociated flow and stability of granular materials.” J. Eng. Mech., 113(9), 1302–1318.
Lade, P. V., Nelson, R. B., and Ito, Y. M. (1988). “Instability of granular materials with nonassociated flow.” J. Eng. Mech., 114(12), 2173–2191.
Lade, P. V., and Pradel, D. (1990). “Instability and plastic plow of soils. I: Experimental observations.” J. Eng. Mech., 116(11), 2532–2550.
Leong, W. K., Chu, J., and Teh, C. I. (2000). “Liquefaction and instability of a granular fill material.” Geotech. Test. J., 23(2), 178–192.
Leroueil, S. (2001). “Natural slopes and cuts: Movement and failure mechanisms.” Géotechnique, 51(3), 197–243.
Loke, W. L. (2004). “Failure mechanisms of gentle granular soil slopes.” M.S. thesis, Nanyang Technological Univ., Singapore.
Nicot, F., Darve, F., and Khoa, H. (2007). “Bifurcation and second-order work in granular materials.” Int. J. Numer. Anal. Methods Geomech., 31(8), 1007–1032.
Nicot, F., and Wan, R. (2010). Micromechanics of failure in granular geomaterials, Wiley.
Nova, R. (1994). “Controllability of the incremental response of soil specimens subjected to arbitrary loading programs.” J. Mech. Behav. Mater., 5(2), 193–201.
Nova, R. (2003). “The failure concept in soil mechanics revisited.” Bifurcations and instabilities in geomechanics, J. F. Labuz and A. Drescher, eds., Swets and Zeitlinger, Lisse, The Nederlands, 3–16.
Olson, S. M., Stark, T. D., Walton, W. H., and Castro, G. (2000). “1907 static liquefaction flow failure of the north dike of Wachusett dam.” J. Geotech. Geoenviron. Eng., 126(12), 1184–1193.
Pradel, D., and Lade, P. V. (1990). “Instability and plastic flow of soils. II: Analytical investigation.” J. Eng. Mech., 116(11), 2551–2566.
Sasitharan, S., Robertson, P. K., Sego, D. C., and Morgenstern, N. R. (1993). “Collapse behavior of sand.” Can. Geotech. J., 30(4), 569–577.
Sawicki, A., and Swidzinski, W. (2010). “Modelling of pre-failure instabilities of sand.” Comput. Geotech., 37(6), 781–788.
Sibille, L., Nicot, F., Donze, F., and Darve, F. (2007). “Material instability in granular assemblies from fundamentally different models.” Int. J. Numer. Anal. Methods Geomech., 31(3), 457–481.
Skopek, P., Morgenstern, N. R., Robertson, P. K., and Sego, D. C. (1994). “Collapse of dry sand.” Can. Geotech. J., 31(6), 1003–1008.
Sladen, J. A., D’Hollander, R. D., and Krahn, J. (1985). “The liquefaction of sands, a collapse surface approach.” Can. Geotech. J., 22(4), 564–578.
Wanatowski, D., and Chu, J. (2007). “Static liquefaction of sand in plane-strain.” Can. Geotech. J., 44(3), 299–313.
Yang, J. (2002). “Non-uniqueness of flow liquefaction line for loose sand.” Géotechnique, 52(10), 757–760.
Zhu, J. H., and Anderson, S. A. (1998). “Determination of shear strength of Hawaiian residual soil subjected to rainfall-induced landslides.” Géotechnique, 48(1), 73–82.
Information & Authors
Information
Published In
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Aug 4, 2009
Accepted: Jun 6, 2011
Published online: Jan 17, 2012
Published in print: Feb 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.