Influence of Underlying Weak Soil on Passive Earth Pressure in Cohesionless Deposits
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 137, Issue 3
Abstract
Finite-element simulations demonstrate the influence of underlying weak soil on mobilization of passive pressures in cohesionless deposits. Traditional passive earth pressure theories with typical angles of interface friction may overestimate passive forces in such cases. Simple analytical models that incorporate the underlying weak soil using traditional passive earth pressure concepts are shown to agree reasonably with the finite-element simulations. The studies presented herein are relevant for cases in which cohesionless soil deposits overlie soft clay, liquefiable sand, or other weak layers.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was part of a broader effort to develop fragility functions for bridges in liquefied and laterally spreading ground. Funding was provided by the Pacific Earthquake Engineering Research Center through contract No. SA5258, and by the Pacific Earthquake Engineering Research Center Lifelines Program through contract No. SA5407:1, under the guidance of Tom Shantz. The contents of this paper do not necessarily represent a policy of the agency or endorsement by the state or federal government.
References
Brandenberg, S. J., Boulanger, R. W., Kutter, B. L., and Chang, D. (2005). “Behavior of pile foundations in laterally spreading ground during centrifuge tests.” J. Geotech. Geoenviron. Eng., 131(11), 1378–1391.
Caquot, A., and Kerisel, J. (1948). “Tables for the calculation of passive pressure, active pressure, and bearing capacity of foundations.” Gautheir-Villars, Paris.
Duncan, M. J., and Mokwa, R. L. (2001). “Passive earth pressure theories: Theories and tests.” J. Geotech. Geoenviron. Eng., 127(3), 248–257.
Lemnitzer, A., Ahlberg, E. R., Nigbor, R. L., Shamsabadi, A., Wallace, J. W., and Stewart, J. P. (2009). “Lateral performance of full-scale bridge abutment wall with granular backfill.” J. Geotech. Geoenviron. Eng., 135(4), 506–514.
Mokwa, R. L., and Duncan, J. M. (2001). “Experimental evaluation of lateral-load resistance of pile caps.” J. Geotech. Geoenviron. Eng., 127(2), 185–192.
Ovesen, N. K. (1964). “Anchor slabs, calculation methods and model tests.” Bulletin No. 16, The Danish Geotechnical Institute, Copenhagen.
Paik, K. H., and Salgado, R. (2003). “Estimation of active earth pressure against rigid retaining walls considering arching effects.” Geotechnique, 53(7), 643–653.
Rankine, W. J. M. (1857). “On the stability of loose earth.” Philos. Trans. R. Soc. London, 147, 9–27.
Rollins, K. M., and Sparks, A. (2002). “Lateral resistance of full-scale pile cap with gravel backfill.” J. Geotech. Geoenviron. Eng., 128(9), 711–723.
Romstad, K., Kutter, B., Maroney, B., Vanderbilt, E., Griggs, M., and Chai, Y. H. (1995). “Experimental measurements of bridge abutment behavior.” Rep. No. UCD-STR-95-1, Structural Engineering Group, Univ. of California, Davis, CA.
Terzaghi, K. (1936). “A fundamental fallacy in earth pressure computations.” J. Boston Soc. Civ. Eng., 23, 71–88.
Zhu, D., and Qian, Q. (2000). “Determination of passive earth pressure coefficients by the method of triangular slices.” Can. Geotech. J., 37(2), 485–491.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: May 7, 2009
Accepted: Aug 10, 2010
Published online: Aug 11, 2010
Published in print: Mar 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.