Physical Characterization of Municipal Solid Waste for Geotechnical Purposes
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 136, Issue 9
Abstract
A procedure to characterize municipal solid waste (MSW) for geotechnical engineering purposes is developed based on experience with waste characterization and testing. Existing MSW classification systems are reviewed briefly, and the field and laboratory waste characterization programs of two important projects are presented. Findings on the influence of the waste’s physical composition on its mechanical response from these projects and recent studies of MSW are integrated to develop a waste characterization procedure for efficient collection of the relevant information on landfill operation and waste physical characteristics that are most likely to affect the geotechnical properties of MSW. A phased approach to implementation of this procedure is proposed as a best practice for the physical characterization of MSW for geotechnical purposes. The scope of the phased procedure can be adjusted to optimize the effort required to collect relevant information on a project-specific basis. The procedure includes a systematic evaluation of the moisture and organic content of MSW, because they are important factors in the geotechnical characterization of MSW.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The work described in this paper was funded by the National Science Foundation Division of Civil and Mechanical Systems under Grant Nos. UNSPECIFIEDCMMI-0220064, UNSPECIFIEDCMMI-0635435, and UNSPECIFIEDCMMI-0220159 as part of a collaborative study by the University of California at Berkeley, the Arizona State University, the Geosyntec Consultants, the University of Texas at Austin, and the University of Patras. Interactions with our other research collaborators, Dr. G. Athanasopoulos, Dr. E. Rathje, and Dr. K. Stokoe were invaluable. The writers would like also to thank S. Chickey of Geosyntec Consultants for his help in the field investigation at the Tri-Cities Landfill, B. Seos, Ph.D. student at Arizona State University, for his help in the classification of MSW, and Mr. Guy Petraborg of Waste Management for assisting with the waste sampling operations at the Tri-Cities landfill. More information on this project and blank forms for future waste characterization are available through the Geoengineer website at http://waste.geoengineer.org.
References
Athanasopoulos, G., Grizi, A., Zekkos, D., Founta, P., and Zisimatou, E. (2008). “Municipal solid waste as a reinforced soil: Investigation using synthetic waste.” ASCE-Geoinstitute Geocongress 2008, Geotechnics of Waste Management and Remediation, New Orleans, 168–175, Geotechnical Special Publication (GSP) No. 177.
Athanasopoulos-Zekkos, A., Zekkos, D., and Matasović, N. (2008). “Validation of generic municipal solid waste material properties for seismic design of landfills.” Proc., 4th Geotechnical Earthquake Engineering and Soil Dynamics Conf., ASCE, Reston, Va.
Bray, J. D., Zekkos, D., Kavazanjian, E., Athanasopoulos, G. A., and Riemer, M. F. (2009). “Shear strength of municipal solid waste.” J. Geotech. Geoenviron. Eng., 135(6), 709–722.
California Environmental Protection Agency (CalEPA). (2006). Targeted statewide waste characterization study: Characterization and quantification of residuals from materials recovery facilities, California Environmental Protection Agency, Sacramento, Calif.
Coumoulos, D. G., Koryalos, T. P., Metaxas, I. L., and Gioka, D. A. (1995). “The main landfill of Athens—Geotechnical investigation.” Proc., 5th Int. Landfill Symp., Sardinia ’95, CISA, Cagliari, Italy.
Dixon, N., and Langer, U. (2006). “Development of a MSW classification system for the evaluation of mechanical properties.” Waste Manage., 26(3), 220–232.
Gabr, M. A., and Valero, S. N. (1995). “Geotechnical properties of municipal solid waste.” Geotech. Test. J., 18, 241–254.
Geosyntec. (1996). “Waste mass field investigation, Operating Industries Inc. landfill, Monterey Park, California.” Rep. No. SWP-2, Geosyntec Consultants, Huntington Beach, Calif.
Gomes, C., Ernesto, A., Lopes, M. L., and Moura, C. (2002). “Sanitary landfill of Santo Tirso municipal waste physical, chemical and mechanical properties.” Proc., 4th Int. Congress on Environmental Geotechnical, Brazil, Vol. 1, 255–261.
Gomes, C., Lopes, M. L., and Lopes, M. G. (2005). “A study of MSW properties of a Portuguese landfill.” Int. Workshop Hydro-Physico-Mechanics of Landfills, Grenoble 1 University, Grenoble, France.
Grisolia, M., Napoleoni, Q., and Tangredi, G. (1995). “Contribution to a technical classification of municipal solid waste.” Proc., 5th Int. Landfill Symp., Sardinia ’95, Vol. 2, CISA, Cagliari, Italy, 703–710.
Hossain, M. S., Gabr, M. A., and Barlaz, M. A. (2003). “Relationship of compressibility parameters to municipal solid waste decomposition.” J. Geotech. Geoenviron. Eng., 129(12), 1151–1158.
Kavazanjian, E., Jr. (2001). “Mechanical properties of municipal solid waste.” Proc., 8th Int. Waste Management and Landfill Symp., Sardinia ‘01, Vol. III, Environmental Sanitary Engineering Centre (CISA), Univ. of Padua, Padua, Italy, 415–424.
Kavazanjian, E., Jr., Matasović, N., and Bachus, R. C. (1999). “Large-diameter static and cyclic laboratory testing of municipal solid waste.” Proc., 7th Int. Waste Management and Landfill Symp., Sardinia ‘99, Vol. 3, CISA, Cagliari, Italy, 437–444.
Kavazanjian, E., Jr., Matasović, N., Stokoe, K., and Bray, J. D. (1996). “In-situ shear wave velocity of solid waste from surface wave measurements.” Proc., 2nd Int. Congress on Environmental Geotechnics, M. Kamon, ed., Vol. 1, Balkema, Rotterdam, The Netherlands, 97–102.
Landva, A. O., and Clark, J. I. (1990). Geotechnics of waste fill, theory and practice, STP 1070, A. Landva and G. D. Knowles, ed., ASTM, West Conshohocken, Pa., 86–103.
Langer, U. (2005). “Shear and compression behavior of undegraded Municipal Solid Waste.” Ph.D. thesis, Loughborough Univ.
Manassero, M., Van Impe, W. F., and Bouazza, A. (1997). “Waste disposal and containment.” Proc., 2nd Int. Congress on Environmental Geotechnics, Vol. 2, Balkema, Rotterdam, The Netherlands, 1425–1474.
Matasović, N., and Kavazanjian, E., Jr. (1998). “Cyclic characterization of OII landfill solid waste.” J. Geotech. Geoenviron. Eng., 124(3), 197–210.
Matasović, N., Williamson, T. A., and Bachus, R. C. (1998), “Cyclic direct simple shear testing of OII landfill solid waste.” Proc., 11th European Conf. on Soil Mechanics and Foundation Engineering, Vol. 1, Balkema, Rotterdam, The Netherlands, 441–448.
Piatak, N. M., et al. (2004). “Geochemical characterization of mine waste at the Ely Copper Mine Superfund Site, Orange County, Vermont.” U.S. Geological Survey Open-File Rep. No. 2004-1248, Version 1.0, ⟨http://pubs.usgs.gov/of/2004/1248/⟩ (Feb. 26, 2009).
Sanchez-Alciturri, J. M., Palma, J., Sagaseta, C., and Canizal, J. (1993). Mechanical properties of wastes in a sanitary landfill, waste disposal by landfill—Green ’93, R. W. Sarsby, ed., Balkema, Rotterdam, The Netherlands, 357–363.
Siegel, R. A., Robertson, R. J., and Anderson, D. G. (1990). Slope stability investigations at a landfill in southern California, American Society for Testing and Materials (ASTM), West Conshohocken, Pa., 259–284, Special Technical Publication (STP) 1070.
Zekkos, D., Bray, J. D., and Riemer, M. F. (2008). “Shear modulus and material damping of municipal solid waste based on large-scale cyclic triaxial testing.” Can. Geotech. J., 45(1), 45–58.
Zekkos, D. P. (2005). “Evaluation of static and dynamic properties of municipal solid-waste.” Ph.D. thesis, Dept. of Civil and Environmental Engineering, Univ. of California, Berkeley, Calif., ⟨http://waste.geoengineer.org⟩.
Zekkos, D. P., et al. (2006). “Unit weight of municipal solid-waste.” J. Geotech. Geoenviron. Eng., 132(10), 1250–1261.
Zornberg, J. G., Jernigan, B. L., Sanglerat, T. R., and Cooley, B. H. (1999). “Retention of free liquids in landfills undergoing vertical expansion.” J. Geotech. Geoenviron. Eng., 125(7), 583–594.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Oct 3, 2008
Accepted: Jan 20, 2010
Published online: Jan 25, 2010
Published in print: Sep 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.