3D Modeling of an NATM Tunnel in High Clay Using Two Different Constitutive Models
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 135, Issue 9
Abstract
This paper studies the accuracy of the three-dimensional finite-element predictions of a displacement field induced by tunneling using new Austrian tunneling method (NATM) in stiff clays with high conditions. The studies are applied to the Heathrow express trial tunnel. Two different constitutive models are used to represent London Clay, namely a hypoplastic model for clays and the modified Cam-clay (MCC) model. Good quality laboratory data are used for parameter calibration and accurate field measurements are used to initialize and void ratio. The hypoplastic model gives better predictions than the MCC model with satisfactory estimate for the displacement magnitude and slightly overestimated width of the surface settlement trough. Parametric studies demonstrate the influence of variation of the predicted soil behavior in the very-small-strain to large-strain range and the influence of the time dependency of the shotcrete lining behavior.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The RKF-23 integration scheme used in the umat subroutine was programmed and kindly provided by Professor C. Tamagnini and Dr. E. Sellari. The writer acknowledges the financial support by the research Grant Nos. UNSPECIFIEDGACR 205/08/0732, UNSPECIFIEDGACR 205/07/0574, and UNSPECIFIEDMSM0021620855.
References
Addenbrooke, T., Potts, D., and Puzrin, A. (1997). “The influence of pre-failure soil stiffness on the numerical analysis of tunnel construction.” Geotechnique, 47(3), 693–712.
Atkinson, J. H., Richardson, D., and Stallebrass, S. E. (1990). “Effects of recent stress history on the stiffness of over-consolidated soil.” Geotechnique, 40(4), 531–540.
Augrade, C. E., and Burd, H. J. (2001). “Three-dimensional finite element analysis of lined tunnels.” Int. J. Numer. Analyt. Meth. Geomech., 25, 243–262.
Bae, G. -J., Chang, S. -H., Lee, S. -W., and Park, H. -G. (2004). “Evaluation of interfacial properties between rock mass and shotcrete.” Proc., ISRM SINOROCK 2004 Symp., Int. J. Rock Mechanics and Mining Sci., 41 (Supplement 1), 106–112.
Baudet, B. A., and Stallebrass, S. E. (2004). “A constitutive model for structured clays.” Geotechnique, 54(4), 269–278.
Boldini, D., Lackner, R., and Mang, H. A. (2005). “Ground-shotcrete interaction of NATM tunnels with high overburden.” J. Geotech. Geoenviron. Eng., 131(7), 886–897.
Bowers, K. H. (1997). “An appraisal of the new Austrian tunnelling method in soil and weak rock.” Ph.D. thesis, The Univ. of Leeds, London.
Burnett, A. D., and Fookes, P. G. (1974). “A regional engineering geological study of the London Clay in the London and Hampshire basins.” Q. J. Eng. Geol., 7(3), 257–295.
Butterfield, R. (1979). “A natural compression law for soils.” Geotechnique, 29(4), 469–480.
Clayton, C. R. I., and Heymann, G. (2001). “Stiffness of geomaterials at very small strains.” Geotechnique, 51(3), 245–255.
Cotecchia, F., and Chandler, J. (2000). “A general framework for the mechanical behavior of clays.” Geotechnique, 50(4), 431–447.
Dasari, G. R., Rawlings, C. G., and Bolton, M. D., and (1996). “Numerical modelling of a NATM tunnel construction in London Clay.” Geotechnical aspects of underground construction in soft ground, R. J. Mair and R. N. Taylor, eds., Balkema, Rotterdam, 491–496.
Deane, A. P., and Basset, R. H. (1995). “The Heathrow express trial tunnel.” Proc.-Inst. Civ. Eng., 113, 144–156.
Doležalová, M. (2002). “Approaches to numerical modelling of ground movements due to shallow tunnelling.” Proc., 2nd Int. Conf. on Soil Structure Interaction in Urban Civil Engineering, ETH Zürich, 365–376.
Enright, W. H., Higham, D. J., Owren, B., and Sharp, P. W. (1995). “A survey of the explicit Runge-Kutta method.” Technical Rep. No. 94–291, Univ. of Toronto, Toronto, Canada.
Farias, M. M., Assis, A. P., and Moraes, A. H. (2001). “Three-dimensional numerical simulation of a tunnel excavated using NATM—Brasilia underground case.” Proc., XV Int. Conf. on Soil Mechanics and Geotechnical Engineering, Balkema, Istanbul, Turkey, 1391–1394.
Franzius, J. N., Potts, D. M., and Burland, J. B. (2005). “The influence of soil anisotropy and on ground surface movements resulting from tunnel excavation.” Geotechnique, 55(3), 189–199.
Gasparre, A. 2005. “Advanced laboratory characterisation of London Clay.” Ph.D. thesis, Univ. of London, London.
Gasparre, A., Nishimura, S., Coop, M. R., and Jardine, R. J. (2007a). “The influence of structure on the behavior of London Clay.” Geotechnique, 57(1), 19–31.
Gasparre, A., Nishimura, S., Minh, N. A., Coop, M. R., and Jardine, R. J. (2007b). “The stiffness of natural London Clay.” Geotechnique, 57(1), 33–47.
Grammatikopoulou, A., Zdravković, L., and Potts, D. M. (2002). “The behavior of ’bubble’ models in tunneling problems.” Proc., 2nd Int. Conf. on Soil Structure Interaction in Urban Civil Engineering, ETH Zürich, Zürich, Switzerland, 381–388.
Gudehus, G., et al. (2008). “The soilmodels.info project.” Int. J. Numer. Analyt. Meth. Geomech., 32(12), 1571–1572.
Gudehus, G., and Mašín, D. (2009). “Graphical representation of constitutive equations.” Geotechnique, 52(2), 147–151.
Gunn, M. J. (1993). “The prediction of surface settlement profiles due to tunneling.” Proc., Worth Memorial Symp., Thomas Telford, London, 304–316.
Hight, D. W., Gasparre, A., Nishimura, S., Minh, N. A., Jardine, R. J., and Coop, M. R. (2007). “Characteristics of the London Clay from the terminal 5 site at Heathrow airport.” Geotechnique, 57(1), 3–18.
Hisatake, M. (2003). “Effects of steel fiber reinforced high-strength shotcrete in a squeezing tunnel.” Tunn. Undergr. Space Technol., 18, 197–204.
Hull, T. E., Enright, W. H., and Jackson, K. R. (1996). “Runge-Kutta research at Toronto.” Appl. Numer. Math., 22(1–3), 225–236.
Jardine, R. J., Symes, M. J., and Burland, J. B. (1984). “The measurement of soil stiffness in the triaxial apparatus.” Geotechnique, 34(3), 323–340.
John, M., and Mattle, B. (2003). “Factors of shotcrete lining design.” Tunnels Tunnel. Int., 35(10), 42–44.
Karakus, M. (2007). “Appraising the methods accounting for 3D tunnelling effects in 2D plane strain FE analysis.” Tunn. Undergr. Space Technol., 22, 47–56.
Karakus, M., and Fowell, R. J. (2005). “Back analysis for tunnelling induced ground movements and stress redistribution.” Tunn. Undergr. Space Technol., 20, 514–524.
Kovacevic, N., Hight, D. W., and Potts, D. M. (2007). “Predicting the stand-up time of temporary London Clay slopes at Terminal 5, Heathrow airport.” Geotechnique, 57(1), 63–74.
Lackner, R., Macht, J., Hellmich, C., and Mang, H. A. (2002). “Hybrid method for analysis of segmented shotcrete tunnel linings.” J. Geotech. Geoenviron. Eng., 128(4), 298–308.
Mašín, D. (2005). “A hypoplastic constitutive model for clays.” Int. J. Numer. Analyt. Meth. Geomech., 29(4), 311–336.
Mašín, D., and Herle, I. (2005). “State boundary surface of a hypoplastic model for clays.” Comput. Geotech., 32(6), 400–410.
Meschke, G., Kropik, C., and Mang, H. A. (1996). “Numerical analyses of tunnel linings by means of a viscoplastic material model for shotcrete.” Int. J. Numer. Methods Eng., 39, 3145–3162.
Möller, S. C., Vermeer, P. A., and Bonnier, P. G., and (2003). “A fast 3D tunnel analysis.” Proc., 2nd MIT Conference on Computational Fluid and Solid Mechanics, K. J. Bathe, ed., Vol. 1, Elsevier, Amsterdam, The Netherlands, 486–489.
Ng, C. W. W., Lee, K. M., and Tange, D. K. W. (2004). “Three-dimensional numerical investigations of new Austrian tunnelling method (NATM) twin tunnel interactions.” Can. Geotech. J., 41, 523–539.
Niemunis, A., and Herle, I. (1997). “Hypoplastic model for cohesionless soils with elastic strain range.” Mech. Cohesive-Frict. Mater., 2, 279–299.
Oreste, P. P. (2003). “A procedure for determining the reaction curve of shotcrete lining considering transient conditions.” Rock Mech. Rock Eng., 36(3), 209–236.
Pöttler, R. (1990). “Time-dependent rock-shotcrete interaction: A numerical shortcut.” Comp. Geotechn., 9, 149–169.
Potts, D. M., and Zdravkovic, L. (1999). Finite element analysis in geotechnical engineering, Vol. I, Thomas Telford, London.
Potts, D. M., and Zdravkovic, L. (2001). Finite element analysis in geotechnical engineering, Vol. II, Thomas Telford, London.
Powell, D. B., Sigl, O., and Beveridge, J. P. (1997). “Heathrow express—Design and performance of the platform tunnels at terminal 4.” Proc., Tunneling ’97, Institution of Mining and Metallurgy, London, 565–593.
Ridley, A. M., and Burland, J. B. (1993). “A new instrument for measuring soil moisture suction.” Geotechnique, 43(2), 321–324.
Rodemann, D. (2008). Tochnog professional user’s manual, ⟨http://www.feat.nl⟩ (April 22, 2008).
Stallebrass, S. E., and Taylor, R. N. (1997). “Prediction of ground movements in overconsolidated clay.” Geotechnique, 47(2), 235–253.
Tang, D. K. W., Lee, K. M., and Ng, C. W. W. (2000). “Stress paths around 3-D numerically simulated NATM tunnel in stiff clay.” Geotechnical aspects of underground construction in soft ground, O. Kusakabe, K. Fukita, and Y. Miyazaki, eds., Balkema, Rotterdam, 443–449.
Viggiani, G., and Atkinson, J. H. (1995). “Stiffness of fine-grained soil at very small strains.” Geotechnique, 45(2), 245–265.
Yazdchi, M., Macklin, S. R., and Yeow, H. -C. (2006). “3D modelling of sprayed-concrete-lined tunnels in clay.” Geotechnical Engineering, Proc. Inst Civ. Eng. (Lond.), 159(GE4), 243–250.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Aug 21, 2007
Accepted: Jan 24, 2009
Published online: Aug 14, 2009
Published in print: Sep 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.