Stability Analysis of Anchor-Reinforced Soil Slopes with Taylor’s Stability Chart
Publication: International Journal of Geomechanics
Volume 23, Issue 2
Abstract
The stability of earth slopes can be enhanced by introducing an anchoring system. The factor of safety of an anchor-reinforced slope is one of the essential items required to evaluate stability. This parameter can be predicted using limit equilibrium and numerical approaches by relevant software. Taylor’s stability chart has been frequently used to estimate the factor of safety of an unreinforced homogeneous cohesive-frictional soil slope. An analytical expression was developed in this study based on the friction circle method by which the factor of safety of anchor-reinforced slopes can be predicted using Taylor’s chart. The anchor-reinforced slope considered in the analysis consisted of homogeneous cohesive-frictional soil. The analyses were carried out considering different slope inclinations, anchor loads, anchor orientations, and slip circles. An illustrative example explained the procedure for finding the factor of safety and showed how the developed method could be used by practicing engineers. A comparison between the factor of safety estimated by Taylor’s chart and the limit equilibrium method using SLIDE indicates a good agreement.
Practical Applications
An anchoring system can improve the stability of earth slopes. The safety factor of an anchor-reinforced slope is the most critical design parameter as it reflects whether the slope is stable against driving forces. In geotechnical engineering, the factor of safety can be computed using an analytical/numerical approach, based on which relevant commercial software programs have been developed. These software programs might not be available to everyone. More importantly, they often require parameters of soil that need complex tests to be found, making their use unattractive for practicing engineers. The factor of safety of plain slopes can be found using Taylor’s stability chart, which is widely used in practice due to being convenient. This study presents a method through which the factor of safety of each potential slip surface in an anchored reinforced slope can be determined using Taylor’s stability chart. According to the approach, an anchored slope is equalized with a plain slope having a greater value of internal soil friction angle. Then, the factor of safety of equalized plain slope is determined using Taylor’s stability chart.
Get full access to this article
View all available purchase options and get full access to this article.
References
Baker, R. 2003. “A second look at Taylor’s stability chart.” J. Geotech. Geoenviron. Eng. 129 (12): 1102–1108. https://doi.org/10.1061/(ASCE)1090-0241(2003)129:12(1102).
Bishop, A. W. 1955. “The use of the slip circle in the stability analysis of slopes.” Géotechnique 5 (1): 7–17. https://doi.org/10.1680/geot.1955.5.1.7.
Fellenius, W. 1936. “Calculation of stability of earth dams.” In Vol. 4 of Proc., Transactions Second Congress on Large Dams, 445–463.
Janbu, N. 1954. “Application of composite slip surface for stability analysis.” Proc., of the Eur. Conf. Stab. of Earth Slopes 3: 43–49.
Janbu, N. 1973. Slope stability computations. Chichester, UK: Wiley.
Krahn, J. 2003. “The 2001 R.M. hardy lecture: The limits of limit equilibrium analyses.” Can. Geotech. J. 40 (3): 643–660. https://doi.org/10.1139/t03-024.
Li, X., S. He, and Y. Wu. 2012. “Limit analysis of the stability of slopes reinforced with anchors.” Int. J. Numer. Anal. Methods Geomech. 36 (17): 1898–1908. https://doi.org/10.1002/nag.1093.
Majumdar, D. K. 1971. “Stability of soil slopes under horizontal earthquake force.” Géotechnique 21 (1): 84–88. https://doi.org/10.1680/geot.1971.21.1.84.
Morgenstern, N. R., and V. E. Price. 1965. “The analysis of the stability of general slip surfaces.” Géotechnique 15 (1): 79–93. https://doi.org/10.1680/geot.1965.15.1.79.
Rajabian, A., and B. V. S. Viswanadham. 2016. “Behaviour of anchored geosynthetic-reinforced slopes subjected to seepage in a geotechnical centrifuge.” Geosynth. Int. 23 (1): 36–47. https://doi.org/10.1680/jgein.15.00031.
Rajabian, A., and B. V. S. Viswanadham. 2020. “Behaviour of geosynthetic in anchored geosynthetic-reinforced slopes subjected to seepage.” Proc. Inst. Civ. Eng. Ground Improv. 173 (4): 224–236. https://doi.org/10.1680/jgrim.18.00082.
Sabatini, P. J., D. G. Pass, and R. C. Bachus. 1999. Ground anchors and anchored systems. Rep. No. FHWA-IF-99-015. Washington, DC: Federal Highway Administration, Office of Bridge Technology.
Sahoo, P. P., and S. K. Shukla. 2019. “Taylor’s slope stability chart for combined effects of horizontal and vertical seismic coefficients.” Géotechnique 69 (4): 344–354. https://doi.org/10.1680/jgeot.17.P.222.
Salunkhe, D., R. Bartakke, G. Chvan, and P. Kothavale. 2017. “An overview on methods for slope stability analysis.” Int. J. Eng. Res. Technol. 6 (3): 528–535.
Sarma, S. K. 1973. “Stability analysis of embankments and slopes.” Géotechnique 23 (3): 423–433. https://doi.org/10.1680/geot.1973.23.3.423.
Spencer, E. 1967. “A method of analysis of the stability of embankments assuming parallel inter-slice forces.” Géotechnique 17 (1): 11–26. https://doi.org/10.1680/geot.1967.17.1.11.
Steward, T., N. Sivakugan, S. K. Shukla, and B. M. Das. 2011. “Taylor’s slope stability charts revisited.” Int. J. Geomech. 11 (4): 348–352. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000093.
Taylor, D. W. 1937. “Stability of earth slopes.” J. Boston Soc. Civ. Engrs 24 (3): 197–246.
Taylor, D. W. 1948. Fundamentals of soil mechanics. New York: Wiley.
Zhang, T., H. Zheng, and C. Sun. 2019. “Global method for stability analysis of anchored slopes.” Int. J. Numer. Anal. Methods Geomech. 43 (1): 124–137. https://doi.org/10.1002/nag.2856.
Zhu, D. Y., C. F. Lee, D. H. Chan, and H. D. Jiang. 2005. “Evaluation of the stability of anchor-reinforced slopes.” Can. Geotech. J. 42 (5): 1342–1349. https://doi.org/10.1139/t05-060.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Jan 27, 2022
Accepted: Jul 29, 2022
Published online: Nov 21, 2022
Published in print: Feb 1, 2023
Discussion open until: Apr 21, 2023
ASCE Technical Topics:
- Anchors
- Business management
- Continuum mechanics
- Dynamics (solid mechanics)
- Engineering fundamentals
- Engineering mechanics
- Equilibrium
- Equipment and machinery
- Friction
- Geomechanics
- Geotechnical engineering
- Limit equilibrium
- Practice and Profession
- Public administration
- Public health and safety
- Safety
- Slope stability
- Slopes
- Soil analysis
- Soil dynamics
- Soil mechanics
- Soil properties
- Soil stabilization
- Solid mechanics
- Statics (mechanics)
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Kunlin Lu, Linfei Wang, Rigorous Limit-Equilibrium Solution for Three-Dimensional Slope Stability with an Asymmetric Slip Surface, International Journal of Geomechanics, 10.1061/IJGNAI.GMENG-8890, 24, 2, (2024).