Efficiency of Piles Stabilizing Slopes in Fine-Grained Soils
Publication: International Journal of Geomechanics
Volume 22, Issue 9
Abstract
Equally spaced piles can be designed to ensure the stability of a slope with a desired safety factor or to restrain slow slope movements to prevent damage to existing structures. The piles are usually arranged in lines installed transversally to soil movements or in groups of limited extension in a plan according to their stabilizing or protective function. A numerical study has been performed to analyze the role of some design parameters in the efficiency of equally spaced piles, adopting two-dimensional (2D) and three-dimensional (3D) finite-difference (FD) models. Plane strain models have been used to study the soil arching mechanism and the associated stress transfer from the yielding soil to the stabilizing piles, while 3D numerical analyses have been performed to evaluate the efficiency of pile groups. The effect of varying pile spacing, pile embedded length, soil mechanical properties, and sloping ground conditions have been investigated for two-layer slopes assuming fixed or unconstrained piles. The outcomes of the parametric study made it possible to derive a simple analytical relationship to quantify the resisting contribution provided by the piles in an infinite slope. The paper shows that the proposed approach, even though limited to the ranges of the adopted parameters, can be used for a preliminary design of stabilizing piles to ensure the desired increase in the slope safety factor, as well as to achieve the desired reduction of downhill slope movements.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abbasi, H., S. M. Binesh, and A. Lashkari. 2019. “Using a state-dependent constitutive model in strain wedge method for laterally loaded piles in sand.” Soils Found. 59 (2019): 271–283. https://doi.org/10.1016/j.sandf.2018.10.007.
Al-abboodi, I., and T. T. Sabbagh. 2019. “Numerical modelling of passively loaded pile groups.” Geotech. Geol. Eng. 37: 2747–2761. https://doi.org/10.1007/s10706-018-00791-z.
Ausilio, E., E. Conte, and G. Dente. 2001. “Stability analysis of slopes reinforced with piles.” Comput. Geotech. 28: 591–611. https://doi.org/10.1016/S0266-352X(01)00013-1.
Cai, F., and K. Ugai. 2000. “Numerical analysis of the stability of a slope reinforced with piles.” Soils Found. 40 (1): 73–84. https://doi.org/10.3208/sandf.40.73.
Chen, C. Y., and G. R. Martin. 2002. “Soil-structure interaction for landslide stabilizing piles.” Comput. Geotech. 29: 363–386. https://doi.org/10.1016/S0266-352X(01)00035-0.
Chen, L. T., H. G. Poulos, and T. S. Hull. 1997. “Model tests on pile groups subjected to lateral soil movement.” Soils Found. 37 (1): 1–12. https://doi.org/10.3208/sandf.37.1.
Chore, H. S., R. K. Ingle, and V. A. Sawant. 2012. “Non-linear analysis of pile groups subjected to lateral loads using ‘p-y’ curve.” Interact. Multiscale Mech. 5 (1): 57–73. https://doi.org/10.12989/imm.2012.5.1.057.
Conte, E., A. Troncone, and M. Vena. 2013. “Nonlinear three-dimensional analysis of reinforced concrete piles subjected to horizontal loading.” Comput. Geotech. 49: 123–133. https://doi.org/10.1016/j.compgeo.2012.10.013.
Di Laora, R., R. M. S. Maiorano, and S. Aversa. 2017. “Ultimate lateral load of slope-stabilizing piles.” Géotech. Lett. 7: 237–244. https://doi.org/10.1680/jgele.17.00038.
Di Prisco, C., A. Galli, S. Aversa, and R. M. S. Maiorano. 2016. “Multi-level design approaches for slope-stabilizing piles.” In Vol. 2 of Landslides and engineered slopes. Experience, theory and practice, edited by S. Aversa, L. Cascini, L. Picarelli, and C. Scavia, 821–829. London: CRC Press.
Durrani, I. K., E. Ellis, and D. J. Reddish. 2006. “Modeling lateral pile–soil interaction for a row of piles in a frictional soil.” In Proc., 4th Int. FLAC Symp. in Numerical Modeling in Geomechanics, edited by Hart and Varona, 231–238. Minneapolis: Itasca Consulting Group.
Ellis, E. A., I. K. Durrani, and D. J. Reddish. 2010. “Numerical modeling of discrete pile rows for slope stability and generic guidance for design.” Géotechnique 60 (3): 185–195. https://doi.org/10.1680/geot.7.00090.
Fantera, L. 2018. “Riduzione dei movimenti lenti di versante mediante barriere di protezione costituite da pali accostati.” [In Italian.] Ph.D. thesis, Dept. of Geotechnical and Structural Engineering, Univ. of Rome La Sapienza.
Galli, A., and C. di Prisco. 2013. “Displacement-based design procedure for slope-stabilizing piles.” Can. Geotech. J. 50 (1): 41–53. https://doi.org/10.1139/cgj-2012-0104.
Galli, A., R. M. Maiorano, C. di Prisco, and S. Aversa. 2017. “Design of slope-stabilizing piles: From Ultimate Limit State approaches to displacement based methods.” Riv. Ital. Geotecnica 51: 77–93.
Georgiadis, K., and M. Georgiadis. 2010. “Undrained lateral pile response in sloping ground.” J. Geotech. Geoenviron. Eng. 136: 1489–1500. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000373.
Govindaraju, R. S., M. Hantush, and X. Chu. 2019. “New policy for transparency of data, models, and code.” J. Hydrol. Eng. 24 (3): 01618001. https://doi.org/10.1061/(ASCE)HE.1943-5584.0001785.
Guo, W. D., H. Y. Qin, and E. H. Chee. 2017. “Modeling single piles subjected to evolving soil movement.” Int. J. Geomech. 17: 4.
Hassiotis, S., J. L. Chameau, and M. Gunaratne. 1997. “Design method for stabilization of slopes with piles.” J. Geotech. Geoenviron. Eng. 123 (4): 314–323. https://doi.org/10.1061/(ASCE)1090-0241(1997)123:4(314).
Hu, X., C. Zhou, C. Xu, D. Liu, S. Wu, and L. Li. 2019. “Model tests of the response of landslide-stabilizing piles to piles with different stiffness.” Landslides 16: 2187–2200. https://doi.org/10.1007/s10346-019-01233-4.
Itasca Consulting Group. 2011. FLAC fast Lagrangian analysis of continua v. 7.0 user’s manual. Minneapolis: Itasca Consulting Group.
Ito, T., and T. Matsui. 1975. “Methods to estimate lateral force acting on stabilizing piles.” Soils Found. 15 (4): 43–59. https://doi.org/10.3208/sandf1972.15.4_43.
Ito, T., T. Matsui, and W. P. Hong. 1979. “Design method for the stability analysis of the slope with landing pier.” Soils Found. 19 (4): 43–57. https://doi.org/10.3208/sandf1972.19.4_43.
Jagodnik, V., and Ž. Arbanas. 2015. “Testing of laterally loaded piles in natural sandy gravels.” Int. J. Phys. Modell. Geotech. 15 (4): 191–208. https://doi.org/10.1680/jphmg.14.00010.
Kanagasabai, S., J. A. Smethurst, and W. Powrie. 2011. “Three-dimensional numerical modeling of discrete piles used to stabilize landslides.” Can. Geotech. J. 48: 1393–1411. https://doi.org/10.1139/t11-046.
Kourkoulis, R., F. Gelagoti, I. Anastasopoulos, and G. Gazetas. 2011. “Slope stabilizing piles and pile-groups: Parametric study and design insights.” J. Geotech. Geoenviron. Eng. 137 (7): 663–677. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000479.
Lee, C. Y., T. S. Hull, and H. G. Poulos. 1995. “Simplified pile-slope stability analysis.” Comput. Geotech. 17: 1–16. https://doi.org/10.1016/0266-352X(95)91300-S.
Li, C., J. Wu, H. Tang, J. Wang, F. Chen, and D. Liang. 2015. “A novel optimal plane arrangement of stabilizing piles based on soil arching effect and stability limit for 3D colluvial landslides.” Eng. Geol. 195: 236–247. https://doi.org/10.1016/j.enggeo.2015.06.018.
Liang, R., and S. Zeng. 2002. “Numerical study of soil arching mechanism in drilled shafts for slope stabilization.” Soils Found. 42 (2): 83–92. https://doi.org/10.3208/sandf.42.2_83.
Lirer, S. 2012. “Landslide stabilizing piles: Experimental evidences and numerical interpretation.” Eng. Geol. 149–150: 70–77. https://doi.org/10.1016/j.enggeo.2012.08.002.
Maheshwari, B. K., K. Z. Truman, M. H. El Nagger, and P. L. Gould. 2004. “Three-dimensional finite element nonlinear dynamic analysis of pile groups for lateral transient and seismic excitations.” Can. Geotech. J. 41: 118–133. https://doi.org/10.1139/t03-073.
Muraro, S., A. Madashi, and A. Gajo. 2014. “On the reliability of 3D numerical analyses on passive piles used for slope stabilization in frictional soils.” Géotechnique 64 (6): 486–492. https://doi.org/10.1680/geot.13.T.016.
Nian, T. K., G. Q. Chen, M. T. Luan, Q. Yang, and D. F. Zheng. 2008. “Limit analysis of the stability of slopes reinforced with piles against landslide in nonhomogeneous and anisotropic soils.” Can. Geotech. J. 45: 1092–1103. https://doi.org/10.1139/T08-042.
Pardo, G. S., and E. Saez. 2014. “Experimental and numerical study of arching soil effect in coarse sand.” Comput. Geotech. 57: 75–84. https://doi.org/10.1016/j.compgeo.2014.01.005.
Pirone, M., and G. Urciuoli. 2018. “Analysis of slope-stabilizing piles with the shear strength reduction technique.” Comput. Geotech. 102: 238–251. https://doi.org/10.1016/j.compgeo.2018.06.017.
Peng, W., M. Zhao, H. Zhao, and C. Yang. 2022. “Seismic stability of the slope containing a laterally loaded pile by finite-element limit analysis.” Int. J. Geomech. 22: 06021033. https://doi.org/10.1061/(ASCE)GM.1943-5622.0002226.
Poulos, H. G. 1995. “Design of reinforcing piles to increase slope stability.” Can. Geotech. J. 32 (5): 808–818. https://doi.org/10.1139/t95-078.
Pradel, D., and R. Carrillo. 2008. “Landslide stabilization using drilled shafts.” In Proc. 1st Int. FLAC/DEM Symp. Continuum and Distinct Element Numerical Modeling in Geo-Engineering, edited by R. Hart, C. Detournay, and P. Cundall, 435–441. Minneapolis: Itasca Consulting Group.
Resende, P. T., and J. R. Garcia. 2021. “Evaluation of the use of piles as a stabilizing element for slope stability.” Int. J. Geomech. 21: 12. https://doi.org/10.1061/(ASCE)GM.1943-5622.0002227.
Rosenberg, D. E., and D. W. Watkins. 2018. “New policy to specify availability of data, models, and code.” J. Water Resour. Plann. Manage. 144 (9): 01618001. https://doi.org/10.1061/(ASCE)WR.1943-5452.0000998.
Sengor, M. Y., M. U. Ergun, and N. Huvaj. 2013. “Landslide stabilization by piles: A case history.” In Proc. 18th Int. Conf., on Soil Mechanics and Geotechnical Engineering, 2253–2256. Paris: Presses des Ponts.
Urciuoli, G. 2002. “Strains preceding failure in infinite slopes.” Int. J. Geomech. 2 (1): 93–112. https://doi.org/10.1061/(ASCE)1532-3641(2002)2:1(93).
Viggiani, C. 1981. “Ultimate lateral load on piles used to stabilize landslides.” In Vol. 3 of Proc., 10th Int. Conf., on Soil Mechanics and Foundation Engineers, 555–560. Rotterdam, Netherlands: A.A. Balkema.
Won, J., K. You, S. Jeong, and S. Kim. 2005. “Coupled effects in stability analysis of pile–slope systems.” Comput. Geotech. 32 (4): 304–315. https://doi.org/10.1016/j.compgeo.2005.02.006.
Zeng, S., and R. Liang. 2002. “Stability analysis of drilled shafts reinforced slope.” Soils Found. 42 (2): 93–102. https://doi.org/10.3208/sandf.42.2_93.
Zhang, L. 2009. “Nonlinear analysis of laterally loaded rigid piles in cohesionless soil.” Comput. Geotech. 36: 718–724. https://doi.org/10.1016/j.compgeo.2008.12.001.
Zhao, G., Y. Yang, H. Zhang, and G. Zhang. 2019. “A case study integrating field measurements and numerical analysis of high-fill slope stabilized with cast-in-place piles in Yunnan, China.” Eng. Geol. 253: 160–170. https://doi.org/10.1016/j.enggeo.2019.03.005.
Zheng, H. 2012. “A three-dimensional rigorous method for stability analysis of landslides.” Eng. Geol. 145–146: 30–40. https://doi.org/10.1016/j.enggeo.2012.06.010.
Zhou, C., W. Shao, and C. J. van Westen. 2014. “Comparing two methods to estimate lateral force acting on stabilizing piles for a landslide in the Three Gorges Reservoir, China.” Eng. Geol. 173: 41–53. https://doi.org/10.1016/j.enggeo.2014.02.004.
Information & Authors
Information
Published In
International Journal of Geomechanics
Volume 22 • Issue 9 • September 2022
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Sep 23, 2021
Accepted: Mar 16, 2022
Published online: Jul 7, 2022
Published in print: Sep 1, 2022
Discussion open until: Dec 7, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.