Moistening Deformation Constitutive Model for Unsaturated Loess
Publication: International Journal of Geomechanics
Volume 22, Issue 8
Abstract
The quantification of the moistening deformation for wetting-sensitive unsaturated loess is of direct interest in regions implementing geotechnical engineering. Many constitutive models are available for describing the stress–strain behavior of unsaturated soils. However, few constitutive models directly describe moistening deformation. In this study, two types of triaxial tests were carried out on undisturbed loess. A triaxial compression test was conducted to determine the shear strength boundary of a specimen, and a triaxial moistening test with different stress ratios was used to study the moistening deformation law. The volumetric strain caused by moistening was used as the hardening parameter. A humidity variable was defined as the moisture level, and this parameter could reflect the moistening degree. The experimental rule and plastic theory were combined to establish the constitutive model. The model could directly calculate the deformation amount caused by moistening under different stress states. The model is applicable to the loess in the Guanzhong area in the Chinese Loess Plateau.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors thank the three anonymous reviewers for their detailed and constructive comments. This work was supported by the Science and Technology Project of Henan Province (Project Nos. 212102310938 and 222102320451), the Education Department of Henan Province (Project No. 22B560010), National Natural Science Foundation of China (Grant No. 51379220).
References
Aleinikoff, J. N., D. R. Muhs, E. A. Bettis, W. C. Johnson, C. M. Fanning, and R. Benton. 2008. “Isotopic evidence for the diversity of late quaternary loess in Nebraska: Glaciogenic and nonglaciogenic sources.” Geol. Soc. Am. Bull. 120 (11–12): 1362–1377. https://doi.org/10.1130/B26222.1.
Alonso, E. E., A. Gens, and A. Josa. 1990. “A constitutive model for partially saturated soils.” Géotechnique 40 (3): 405–430. https://doi.org/10.1680/geot.1990.40.3.405.
An, P., A. Zhang, Y. Xing, B. Zhang, W. Ni, and W. Ren. 2018. “Experimental study on settling characteristics of thick self-weight collapsible loess in Xinjiang Ili region in China using field immersion test.” Soils Found. 58 (6): 1476–1491. https://doi.org/10.1016/j.sandf.2018.08.005.
Basma, B. A., and E. R. Tuncer. 1992. “Evaluation and control of collapsible soils.” J. Geotech. Eng. 118 (10): 1491–1504. https://doi.org/10.1061/(ASCE)0733-9410(1992)118:10(1491).
Bolzon, G., B. A. Schrefler, and O. C. Zienkiewicz. 1996. “Elastoplastic soil constitutive laws generalized to partially saturated states.” Géotechnique 46 (2): 279–289. https://doi.org/10.1680/geot.1996.46.2.279.
Casini, F. 2012. “Deformation induced by wetting: A simple model.” Can. Geotech. J. 49 (8): 954–960. https://doi.org/10.1139/t2012-054.
Chen, Z.-H., D. G. Fredlund, and J.-K. Gan. 1999. “Overall volume change, water volume change, and yield associated with an unsaturated compacted loess.” Can. Geotech. J. 36 (2): 321–329. https://doi.org/10.1139/t98-097.
Chen, Z., and Z. Liu. 1986. “Mechanism of collapsible deformation of loess.” [In Chinese.] Chin. J. Geotech. Eng. 8 (2): 1–12.
Fang, J., and Y. Feng. 2020. “Elastoplastic model and three-dimensional method for unsaturated soils.” Shock Vib. 2020: 8592628.
Feda, J. 1988. “Collapse of loess upon wetting.” Eng. Geol. 25 (2–4): 263–269. https://doi.org/10.1016/0013-7952(88)90031-2.
Garakani, A. A., S. M. Haeri, A. Khosravi, and G. Habibagahi. 2015. “Hydro-mechanical behavior of undisturbed collapsible loessial soils under different stress state conditions.” Eng. Geol. 195: 28–41. https://doi.org/10.1016/j.enggeo.2015.05.026.
Jiang, M., H. Hu, and F. Liu. 2012. “Summary of collapsible behaviour of artificially structured loess in oedometer and triaxial wetting tests.” Can. Geotech. J. 49 (10): 1147–1157. https://doi.org/10.1139/t2012-075.
Jin, S., Y. Xing, W. Zhao, A. Zhang, and M. Guo. 2017. “Study on nonlinear constitutive model for loess moistening deformation based on single-line experiment method.” [In Chinese.] J. Hydraul. Eng. 48 (6): 710–719.
Joint, E. 1976. “Experimental study on self-weight collapsible loess of Zhangqiao, Weibei.” [In Chinese.] J. Xi’an Univ. Archit. Technol. 2: 50–76.
Jotisankasa, A., A. Ridley, and M. Coop. 2007. “Collapse behavior of compacted silty clay in suction-monitored oedometer apparatus.” J. Geotech. Geoenviron. Eng. 133 (7): 867–877. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:7(867).
Lawton, E. C., R. J. Fragaszy, and J. H. Hardcastle. 1991. “Stress ratio effects on collapse of compacted clayey sand.” J. Geotech. Eng. 117 (5): 714–730. https://doi.org/10.1061/(ASCE)0733-9410(1991)117:5(714).
Li, G. 1990. “Rockfill materials wetting test and mathematical model.” [In Chinese.] Chin. J. Geotech. Eng. 12 (5): 58–64.
Liang, Q., X. Wu, C. Li, and L. Wang. 2014. “Mechanical analysis using the unconfined penetration test on the tensile strength of Q3 loess around Lanzhou City, China.” Eng. Geol. 183: 324–329. https://doi.org/10.1016/j.enggeo.2014.10.016.
Lin, Z., and W. Liang. 1982. “Engineering properties and zoning of loess and loess-like soils in China.” Can. Geotech. J. 19 (1): 76–91. https://doi.org/10.1139/t82-007.
Liu, M. D., and J. P. Carter. 2002. “A structured cam clay model.” Can. Geotech. J. 39 (6): 1313–1332. https://doi.org/10.1139/t02-069.
Ng, C. W. W., H. Sadeghi, S. K. B. Hossen, C. F. Chiu, E. E. Alonso, and S. Baghbanrezvan. 2016. “Water retention and volumetric characteristics of intact and re-compacted loess.” Can. Geotech. J. 53 (8): 1258–1269. https://doi.org/10.1139/cgj-2015-0364.
Nouaouria, M. S., M. Guenfoud, and B. Lafifi. 2008. “Engineering properties of loess in Algeria.” Eng. Geol. 99 (1–2): 85–90. https://doi.org/10.1016/j.enggeo.2008.01.013.
Roscoe, K. H., and J. B. Burland. 1968. “On the generalized stress–strain behaviour of ‘wet’ clay.” In Engineering plasticity, edited by J. Heyman and F. Leckie, 535–609. Cambridge, UK: Cambridge University Press.
Smalley, I. J., and S. B. Marković. 2014. “Loessification and hydroconsolidation: There is a connection.” Catena 117: 94–99. https://doi.org/10.1016/j.catena.2013.07.006.
Sun, D. A., H. B. Cui, H. Matsuoka, and D. C. Sheng. 2007. “A three-dimensional elastoplastic model for unsaturated compacted soils with hydraulic hysteresis.” Soils Found. 47 (2): 253–264. https://doi.org/10.3208/sandf.47.253.
Wang, L., S. Shao, and F. She. 2020. “A new method for evaluating loess collapsibility and its application.” Eng. Geol. 264: 105376. https://doi.org/10.1016/j.enggeo.2019.105376.
Wheeler, S. J., and V. Sivakumar. 1995. “An elasto-plastic critical state framework for unsaturated soil.” Géotechnique 45 (1): 35–53. https://doi.org/10.1680/geot.1995.45.1.35.
Xie, D., and Y. Xing. 2016. Soil mechanics for loess soils. Beijing: Higher Education Press.
Xing, Y., D. Gao, S. Jin, A. Zhang, and M. Guo. 2019. “Study on mechanical behaviors of unsaturated loess in terms of moistening level.” KSCE J. Civ. Eng. 23 (3): 1055–1063. https://doi.org/10.1007/s12205-019-0848-x.
Yin, Z., H. Lu, and J. Zhu. 1996. “Elliptic-parabolic yield surfaces model and its softness matrix.” [In Chinese.] J. Hydraul. Eng. 12 (4): 23–27.
Zhang, Y., Z. Hu, and Z. Xue. 2018. “A new method of assessing the collapse sensitivity of loess.” Bull. Eng. Geol. Environ. 77 (4): 1287–1298. https://doi.org/10.1007/s10064-018-1372-9.
Zhou, A., S. Wu, J. Li, and D. Sheng. 2018. “Including degree of capillary saturation into constitutive modelling of unsaturated soils.” Comput. Geotech. 95: 82–98. https://doi.org/10.1016/j.compgeo.2017.09.017.
Zhou, X., S. Chi, and Y. Jia. 2019. “Wetting deformation of Core-Wall Rockfill Dams.” Int. J. Geomech. 19 (8): 04019084. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001444.
Zhou, X., S. Chi, Y. Jia, and X. Shao. 2020. “A new wetting deformation simulation method based on changes in mechanical properties.” Comput. Geotech. 117: 103261.1–10326.21.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Aug 3, 2021
Accepted: Mar 14, 2022
Published online: Jun 1, 2022
Published in print: Aug 1, 2022
Discussion open until: Nov 1, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.