Combined Load Behavior of Embedded Strip Footings in Layered Clays
Publication: International Journal of Geomechanics
Volume 22, Issue 6
Abstract
Finite element analyses are performed to investigate the influence of layered clays on the undrained response of embedded strip footings under uniaxial and combined loading. A fully bonded footing–soil interface was considered to comply with the undrained condition. Transformation in failure mechanism under uniaxial (vertical, horizontal, and moment) loading due to the involvement of the soft/strong underlying clay is extensively studied. Analysis-based bearing capacity values of strip footing for different combinations of embedment, top layer depth, and shear strength ratio are provided. The present study accounts for the interaction between coupling of horizontal and rotational displacements and underlying clay layer properties while investigating the combined load response. Subsequent effect of this interaction on the maximum and ultimate horizontal and moment capacities are quantified. In addition, the contribution of different footing and soil properties in altering size and obliquity of the failure envelope is categorically studied.
Get full access to this article
View all available purchase options and get full access to this article.
References
ABAQUS. 2013. Analysis user’s manual, version 2013. Providence, RI: Dassault Systemes Simulia.
Bandini, P., and H. V. Pham. 2011. “Bearing capacity of embedded strip footings in two-layered clay soils.” In Geo-Frontiers 2011: Advances in Geotechnical Engineering, Geotechnical Special Publication 211, edited by J. Han and D. E. Alzamora, 332–341. Reston, VA: ASCE.
Black, J. A., A. Tatari, and M. Hakhamaneshi. 2015. “Centrifuge modelling of shallow foundations on firm over soft layered clay.” In Proc., 68th Canadian Geotechnical Conf. and 7th Canadian Permafrost Conf. 1–6. Richmond, BC, Canada: Canadian Geotechnical Society.
Bowles, J. E. 1988. Foundation analysis and design. New York: McGraw-Hill.
Bransby, M. F., and M. F. Randolph. 1998. “Combined loading of skirted foundations.” Géotechnique 48 (5): 637–655. https://doi.org/10.1680/geot.1998.48.5.637.
Bransby, M. F., and G.-J. Yun. 2009. “The undrained capacity of skirted strip foundations under combined loading.” Géotechnique 59 (2): 115–125. https://doi.org/10.1680/geot.2007.00098.
Brown, J. D., and G. G. Meyerholf. 1969. “Experimental study of the bearing capacity in layered clays.” In Vol. 2 of Proc. 7th Int. Conf. on Soil Mechanics and Foundation Engineering, 45–51. London: International Society for Soil Mechanics and Geotechnical Engineering.
Burd, H. J., and S. Frydman. 1997. “Bearing capacity of plane-strain footings on layered soils.” Can. Geotech. J. 34 (2): 241–253. https://doi.org/10.1139/t96-106.
Butterfîeld, R., G. T. Houlsby, and G. Gottardi. 1997. “Standardized sign conventions and notation for generally loaded foundations.” Géotechnique 47 (5): 1051–1054. https://doi.org/10.1680/geot.1997.47.5.1051.
Button, S. J. 1953. “The bearing capacity of footings on two-layer cohesive subsoil.” In Vol. 1 of Proc., 3rd Int. Conf. on Soil Mechanics and Foundation Engineering, 332–335. London: International Society for Soil Mechanics and Geotechnical Engineering.
Chen, W. F., and H. L. Davidson. 1973. “Bearing capacity determination by limit analysis.” J. Soil Mech. Found Div. 99 (6): 433–449. https://doi.org/10.1061/JSFEAQ.0001887.
Dastider, A. G., N. Sarkar, and S. Chatterjee. 2020. “Numerical study on the lateral breakout behaviour of deep-water pipelines in clays with surficial crust.” Ocean Eng. 218: 108239. https://doi.org/10.1016/j.oceaneng.2020.108239.
Dejong, J. T., et al. 2013. “Biogeochemical processes and geotechnical applications: Progress, opportunities and challenges.” Géotechnique 63 (4): 287–301. https://doi.org/10.1680/geot.SIP13.P.017.
Ehlers, C., J. Chen, H. Roberts, and Y. Lee. 2005. “The origin of near-seafloor crust zones in deepwater.” In Proc., Int. Symp. on Frontiers in Offshore Geotechnics, 927–934. London: Taylor and Francis.
Feng, X., S. Gourvenec, M. F. Randolph, R. Wallerand, and P. Dimmock. 2015. “Effect of a surficial crust on mudmat capacity under fully three-dimensional loading.” Géotechnique 65 (7): 590–603. https://doi.org/10.1680/geot.14.P.167.
Gourvenec, S. 2007. “Failure envelopes for offshore shallow foundations under general loading.” Géotechnique 57 (3): 715–728. https://doi.org/10.1680/geot.2007.57.9.715.
Gourvenec, S. 2008. “Effect of embedment on the undrained capacity of shallow foundations under general loading.” Géotechnique 58 (3): 177–185. https://doi.org/10.1680/geot.2008.58.3.177.
Gourvenec, S., and M. F. Randolph. 2003. “Effect of strength non-homogeneity on the shape of failure envelopes for combined loading of strip and circular foundations on clay.” Géotechnique 53 (6): 575–586. https://doi.org/10.1680/geot.2003.53.6.575.
Gourvenec, S. M., and D. S. K. Mana. 2011. “Undrained vertical bearing capacity factors for shallow foundations.” Géotech. Lett. 1 (4): 101–108. https://doi.org/10.1680/geolett.11.00026.
Hansen, J. B. 1970. A revised and extended formula for bearing capacity. Bulletin No. 28. Copenhagen, Denmark: Danish Geotechnical Institute.
Houlsby, G. T., and A. M. Puzrin. 1999. “The bearing capacity of a strip footing on clay under combined loading.” Proc. R. Soc. London, Ser. A 455 (1983): 893–916. https://doi.org/10.1098/rspa.1999.0340.
Kuo, M., and M. Bolton. 2013. “The nature and origin of deep ocean clay crust from the Gulf of Guinea.” Géotechnique 63 (6): 500–509. https://doi.org/10.1680/geot.10.P.012.
Merifield, R. S., and V. Q. Nguyen. 2006. “Two- and three-dimensional bearing-capacity solutions for footings on two-layered clays.” Geomech. Geoeng. 1 (2): 151–162. https://doi.org/10.1080/17486020600632637.
Merifield, R. S., S. W. Sloan, and H. S. Yu. 1999. “Rigorous plasticity solutions for the bearing capacity of two-layered clays.” Geotechnique 49 (4): 471–490. https://doi.org/10.1680/geot.1999.49.4.471.
Meyerhof, G. G. 1951. “The ultimate bearing capacity of foundations.” Géotechnique 2 (4): 301–332. https://doi.org/10.1680/geot.1951.2.4.301.
Meyerhof, G. G. 1953. “The bearing capacity of foundations under eccentric and inclined loads.” In Vol. 1 of Proc. 3rd Int. Conf. on Soil Mechanics and Foundation Engineering, 440–445. London: International Society for Soil Mechanics and Geotechnical Engineering.
Meyerhof, G. G., and A. M. Hanna. 1978. “Ultimate bearing capacity of foundations on layered soils under inclined load.” Can. Geotech. J. 15 (4): 565–572. https://doi.org/10.1139/t78-060.
Michalowski, R. L., and L. Shi. 1995. “Bearing capacity of footings over two-layer foundation soils.” J. Geotech. Eng. 121 (5): 421–428. https://doi.org/10.1061/(ASCE)0733-9410(1995)121:5(421).
Murff, J. D. 1994. “Limit analysis of multi-footing foundation systems.” In Vol. 1 of Proc. 8th Int. Conf. on Computer Methods and Advances in Geomechanics, 223–244.
Park, H., S. R. Lee, and S. H. Jee. 2010. “Bearing capacity of surface footing on soft clay underlying stiff nonhomogeneous desiccated crust.” Int. J. Offshore Polar Eng. 20 (3): 224–232.
Prandtl, G. 1921. “Hauptaufsätze: über die Eindringungsfestigkeit (Härte) plastischer Baustoffe und die Festigkeit von Schneiden.”[In German.] J. Appl. Math. Mech. 1: 15–20.
Rao, P., Y. Liu, and J. Cui. 2015. “Bearing capacity of strip footings on two-layered clay under combined loading.” Comput. Geotech. 69: 210–218. https://doi.org/10.1016/j.compgeo.2015.05.018.
Reddy, A. S., and R. J. Srinivasan. 1967. “Bearing capacity of footings on layered clays.” J. Soil Mech. Found. Div. 93 (2): 83–99. https://doi.org/10.1061/JSFEAQ.0000961.
Roscoe, K. H., and A. N. Schofield. 1956. “The stability of short pier foundations in sand.” Br. Weld. J. 3 (8): 343–354.
Skempton, A. W. 1951. “The bearing capacity of clays.” In Vol. 1 of Proc., Building and Research Cong., 180–189. London: Building Research Station of the Department of Scientific and Industrial Research.
Taiebat, H. A., and J. P. Carter. 2000. “Numerical studies of the bearing capacity of shallow foundations on cohesive soil subjected to combined loading.” Géotechnique 50 (4): 409–418. https://doi.org/10.1680/geot.2000.50.4.409.
Terazaghi, K. 1943. Theoretical soil mechanics. New York: Wiley.
Ukritchon, B., A. J. Whittle, and S. W. Sloan. 1998. “Undrained limit analyses for combined loading of strip footings on clay.” J. Geotech. Geoenviron. Eng. 124 (3): 265–276. https://doi.org/10.1061/(ASCE)1090-0241(1998)124:3(265).
Vulpe, C., B. Bienen, and C. Gaudin. 2013. “Predicting the undrained capacity of skirted spudcans under combined loading.” Ocean Eng. 74: 178–188. https://doi.org/10.1016/j.oceaneng.2013.06.027.
Zhu, M., and R. L. Michalowski. 2005. “Shape factors for limit loads on square and rectangular footings.” J. Geotech. Geoenviron. Eng. 131 (2): 223–231. https://doi.org/10.1061/(ASCE)1090-0241(2005)131:2(223).
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Feb 28, 2021
Accepted: Feb 7, 2022
Published online: Apr 6, 2022
Published in print: Jun 1, 2022
Discussion open until: Sep 6, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Abhishek Ghosh Dastider, Prasenjit Basu, Santiram Chatterjee, Influence of Soil Destructuration on Bearing Capacity Estimation of Square Footings in Structured Clay, Geo-Congress 2023, 10.1061/9780784484685.059, (582-592), (2023).